Counting matching models…
The same model as the original, but with a 5x2mm version instead. My modifications were all done in Prusaslicer. The 3mf file contains all my (nonsense) changes with cylinders and negative cylinders, as I don't know CAD. If it's stupid…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
A remix of @nicohirsch purge bin for the Core One, but using 20x5x2MM Magnets!
*Updated Aug. 24, 2025* After a few prints and some trial and error, I have made version 2.0 of this remix. I modified several things to make the wheel spin smoothly. I also changed the assembly instructions (original instructions PDF is…
This is a remix of original model created by Jallim Printed nice on Ender 3 S1 with PETG 0.2 mm layers. 2 perimeters, 2 bottom and 3 top layers. There is no need of supports. Tolerances for magnets are 5.3mm for 5mm magnet. Fits loose.…
Great Design, I just added 4 5x2 magnets
Original model created by Jallim Check out my own models and remixes: INSANEWAVE Also you can buy me a coffee: donation link
This is a compact purge bin designed to catch filament during extruder purges. It uses standard 5×2 mm magnets, which simply press-fit into place. While this model was designed for the P2S from bambu, it should attach to any printer with…
This is a Remix of Richards Magnetic Clip. I had Squar 5mm magnets and wanted my Curtains to overlap when closed.
I was looking for a 27mm Star Wars Legion base that was the same dimensions as the game bases and that works well with magnets. All other bases that I found online were either too short or too tall or had engravings on them that would be…
Remixed to accept 20x5x2mm magnets which are easier to find on Amazon US at the time of posting
I've modified the magnet holes to be 5,25*2mm instead of the original 6,25*3,25. I've used 2mm instead of 2,25mm because my magnets are only 1,8mm tall. If you need other sizes I can make them as well.
This is a remake of my 6x3mm magnet model to use the cheaper 5x2mm magnets. This reduces the size and the strength, and could be nice for those that want a gentler tactility as the 6x3mm magnets can be very strong. The outer case has…
Added 4x 5x2mm magnets to mount on dishwasher Modified text so it's easier to do Filament Change Split file in PrusaSlicer to have top and bottom piece
This is a small magnet test for figuring out tolerances. It is what I used to figure out the magnet holes in my AnkerMake bins. You can tilt the tool and add supports to make it print wonky, replicating what it would be like to print a…
SD Cards Magnetic Box for 5x2mm magnets
The Prusa enclosure addon for the buffer uses their standard 20x6x2mm magnets, however this size is not readily available like the 20x5x2mm version that you can find all over Amazon. I modified the slots to accommodate two of these…
This is for testing hole size on different material to get a understanding on the magnet hole measurement. Love this model? Follow me to stay updated on new designs. Your support helps me continue creating quality models for the community.
Basic deckbox, used 5X2mm of magnets and metal rope of 1,5mm or less recomended supports but it's no necesary quality: 0.20 recomended for 60 cards witch double sleeve or one sleeve and more cards Parámetros de impresión 3D quality: 0.20…
The holes are exactly 5mm so it is a snug fit. Might need some plyers to get the magnets in.
A tiny quick remix/edit of MrFlippant's excellent "Cheap Hex Driver Set Case" design that gives holes for 5mm x 2mm magnets as I could not get 1mm magnets delivered speedily in Aus. Printed with a Bambu A1, I was able to just press the…
No supports needed, the loop part should be printed with a brim To assemble the loop remove the sacrifical bridges from the magnet head with a knife, insert the loop in the magnet head and secure with the clip.
I had small 5x1.8mm magnets lying around so I remixed the original design and added 2 more (5 total per tray) for equivalent magnetic force. Works well with these tiny magnets. Add a pause before the layer filling magnet holes and put…
Adorable Labrador Fridge Magnet 🧲 Meet your new favorite fridge buddy! This 4cm magnet features a cute, smiling Labrador face that will brighten up any space. Stick it to your fridge, whiteboard, or magnetic board – anywhere you want a…
🐶 Adorable French Bulldog Fridge Magnet – 4 cm 🧲 Add a touch of charm to your fridge or magnetic board with this cute French Bulldog magnet! 🐾 At just 4 cm , this little pup may be small in size, but it’s big on personality . With its 🖤…
I would suggest using 3 walls, 4-5 top/bottom solid layers, and ~15% infill. I haven't tested it yet, but I imagine having too much infill would add unnecessary weight to the print, putting more strain on the magnets. It protrudes .5mm…
I saw Keina's PCB Holder model and wanted to print one for myself hoping the magnets i had at hand would fit. Rather than take any chances i remixed it to use 10x5x2mm magnets. THIS IS JUST THE BASE ONLY! Youll have to go to Keina's page…
Une impression pour tester la dimension d'épaisseur pour des aimants neodyme de 5mmX2mm A printout to test the thickness dimension for 5mmX2mm neodymium magnets Una impresa para probar la dimensión del espesor de los imanes de neodimio de…
Hi everyone, I designed a small, practical container and wanted to share it with you. The special feature of this design is the integrated slots for 5mm x 5mm x 2mm magnets. This allows the container (or the lid, depending on your design)…
Ich habe die 8mm Magnete durch 2 20x5x2mm Magnete ersetzt. Magnete müssen eingeklebt werden. Ausschnitt für den Brush wurde zusätzlich vergrößert, damit der Prusa-Brush leichter hinein geht.
Publishing with the original fusion archive file so you could edit it for your magnet size if needed.
SD Cards Magnetic Box for 5x2mm magnets
I only had 5x2mm magnets and some prints my friend wanted were 6x2mm. Instead of buying the magnets, I just made this adapter. If you need it changed or anything, I can upload another model if need be with more material taken out. I have…
This is a remix of the original Core One x6 plate holder by Xtr3m3. The original magnet sockets have been changed to fit 20x10x2mm (larger surface area) and 20x5x2mm magnets.
I had small 5x1.8mm magnets lying around so I remixed the original design and added 2 more (5 total per tray) for equivalent magnetic force. Works well with these tiny magnets. Add a pause before the layer filling magnet holes and put…
This is for testing hole size on different material to get a understanding on the magnet hole measurement. Love this model? Follow me to stay updated on new designs. Your support helps me continue creating quality models for the community.
