Counting matching models…
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
Here is a design of a housing for the XH-M609 module. Extra parts needed (m3 x 10mm) x4 Print settings: Layer Hight 0.1 - 0.22 Nozzle 0.4 - 0.6 Plastic: PLA if indoors. PETg Outdoor Supports: Yes, Tree supports for the main housing I made…
This model is compatible with the lego system.
This model is compatible with the lego system.
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a simple case for the XH-M609 battery protection, low voltage cutoff, board. Fusion 360 source and STEP files are provided as well as .STL files. The board I'm referencing is one like this:…
If you have any questions please let me know if you do have any Happy printing
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
2025/12/07 update: I've added a case with cutout for KCD11 button to cutout input power. This was created because in cutoff state it would still be drawing some current for the internal converter, relay and display which is not optimal…
The source marked this model as adult content.
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
This model is compatible with the lego system.
“Little tuned” model from https://www.thingiverse.com/thing:4124974 Clip 1609203J77 for Bosch boxes. I did 10 or more interactions until it fit like i wanted! :) Print from PETG M3x10+ screws M3 Nuts
I needed a holder for my Eklind Metric set.
Remix of Noloxs' adapter - with this remix the adapter now accepts a XH-M609 programmable voltage cutoff board. Parts Required: Makita Terminal: I used 643852-2 but 644808-8 should also work XT-60 connector XH-M609 circuit board 4x 6mm 4G…
English description below Maßstab des Modells ist 3:1, das Gesamtgewicht inklusive Stahlwellen 240g. Verwendete Materialien: Prusament PLA Jet Black OWL PLA Weiß (RAL 9016 Verkehrsweiß) OWL PLA Rot (RAL 3001 Signalrot) Fiberlogy FiberFlex…
Lager 608zz/609zz für einfache Anwendungen + Behälter Es handelt sich um Lager ohne Gleitelemente. Die innere und äußere Schale bildet das Lager. Geeignet für simple Anwendungen wie sie zum Beispiel bei Filament-Rollen-Halter vorkommen.…
I bought a cheap precision screwdriver set to have at work when I need to take apart things with small screws. But it didn't come with a case. I wanted to get some practice in Onshape anyway, so I designed this. I started by arranging the…
Use supports, layer 0.1mm Arm Skeleton, Bent with Clips (Horizontal Grip) : Part 93609 | BrickLink
This box is designed to fit the Arduino Compatible DC-DC Boost Module with Display - XC 4609 from Jaycar or eBay. Has hole for voltage adjust screw as well as button hole for display change. In and Out holes fit 8mm DC socket panel mount…
Three Options Available! *Simple: A modified version of the official HB0609 "slide" part, intended to help mount the HB0609 to the back of the JSAUX Modcase. *Extended: The modified “slide” plus a vertically oriented ‘ModCase’ connector.…
Ruleman con centro de 9mm , 23mm de espesor y 10mm de alto lleva bolillas de acero de 3/16 o 5mm si pueden ser delrin o acetal pom mejor es para bajas revoluciones a menos que lo hagas en este material o nylon, max nylon 12 o…
Print-in-place screwdriver case for Titan 16092 screwdriver
Mounting holes for XH-M609 are 2.8mm are intended to screw directly into the base without heatset inserts. Parts were printed with extra walls for more bite into the plastic. I used ASA-GF which helps even more. Pins for the XH-M609 board…
Choose Gridfinity 2x3 bin or separate holder.
After Printing @Julia Eberts skeleton model wich has fantastic tolerances and is true to scale. However i am more fond of the newer designed arms and created the Newest Lego design of skeletal arms (93609) this is scaled as best as…
BLANKING PLUG – T3 | LT1 / BRAKE BACK PLATE / REAR All T3 models and LT1 models including 4×4 replacement for VW part number 113 609 163 This is my design 100% print with TPU 85A
RUG DOCTOR Clip, Drain Hose 60958 Just a replacement part for your rug doctor.
I needed a battery protection circuit for a DeWalt battery being used in a PowerWheels jeep. It is old and missing the hood, so I needed to protect the xh-m609 voltage cutoff, board, but also wanted to see the voltage readout. It will be…
This is a no-fasteners bracket that snaps around your RIDGID 18V battery charger to allow it to be hung directly on slatwall. You simply press it down over the two mushroom shaped studs bending the finger out of the way and then slide it…
(English below) Dieses Gehäuse wurde für das abgebildete Joy-IT Netzteil konzipiert. An der Vorderseite kann zum Schutz des Drehreglers ein Schutzrahmen montiert werden. An der Seite kann ein Kippschalter und auf der Unterseite die…
Clip on 4020 spool holder for 628 ( 8/24/8 - Skate ) bearings and a second version for 609 bearings ( 9/24/7 ) Printed in Pla just clips onto the Aluminium extrusion, held together by two M3x20 screws. V1.1 Improved clip and added single…
Never struggle with an unruly xlr cable twisting your mic off axis ever again. OR angle it to hold the mic off axis if that's how you roll. Designed for the Sennheiser E609, but should fit any mic with a 21-23mm stem. if your mic's stem…
This was created to replace the stock spindle mount and upgrade the “spindle” to a dwp611 router. Save the linear slide bearings and plastic worm drive gear of the stock part to reuse them as i designed this to work with all existing…
XC4609 Voltage Booster Holder, This holder is designed for M3 Threaded inserts. Once they're in, secure using M3x8 (or smaller in length). This was used to power some LED lights under a floating shelf… Any Print settings work just fine.…
original was well designed and requires no supports.
quick and easy charge dock for iphone 13 pro mac using a IKEA charging puck. This enables you to have a positive positioning for maximum charge for your iphone in a stock leather protector case and not sliding off to the side or missing…
It's a replacement plastic cover for Bosch PST650 jigsaw Lifting rod part number is 2 609 002 320 This plastic part breaks often and is not existing as separate part. Mine broke and no success finding printable version, so I've made it.…
This is a functional remix of the original Tiny e-Lab, upgraded to include battery over-discharge protection, integrated voltage regulation, and enhanced HEPA fume extraction. Modifications made from the original project Over-Discharge…
Replacement handle for the telescoping release. Tested in PETG, 60% infill, 0.25 Draft with 0.4mm Nozzle. Prints with supports. When installing, do not lock the two parts together. Insert the pegs into each rail first. Once in, then lock…
This is a spare part replacement for the direction adjusting lever of my Bosch GSR 18-2. Original Part-No. 2 609 101 009. The part is mounted in many other Bosch tools. Printed with Prusament PETG. Due to the sloping surfaces, I printed…
A simple replacement shelf holder for Gorenje RBIU6092AW fridge to restore shelf support.
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
This model is compatible with the lego system.
I built the weather display enclosure shared by @TheMeanCanEH_1207348 and wanted to use a 906090 battery, but I found that there was too large of a gap around the battery. I made this little spacer to fill in the gap and keep the battery…
This is a spare part replacement for the direction adjusting lever of my Bosch GSR 18-2. Original Part-No. 2 609 101 009. The part is mounted in many other Bosch tools. Printed with Prusament PETG. Due to the sloping surfaces, I printed…
This model is compatible with the lego system.
This model is compatible with the lego system.
A holder for the XH-M609 low voltage disconnect module. You have to use M3 brass inserts and computer drive screws to secure it.
Design Concept This model appears to be a piece possibly for Lego or similar construction toy systems, designed to complement custom builds or replace missing components. Usage Ideal for enthusiasts who enjoy crafting custom Lego…
Stepper motor-42BYGHW609/Шаговый мотор-42BYGHW609
This model is compatible with the lego system.
I built the weather display enclosure shared by @TheMeanCanEH_1207348 and wanted to use a 906090 battery, but I found that there was too large of a gap around the battery. I made this little spacer to fill in the gap and keep the battery…
This model is compatible with major brick brands.
ORGANIZZATORE GT609 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
This model is compatible with the lego system.
A replacement battery indicator cover for DeWalt DCB609 battery housing / cover. Support on buildplate needed.
It's easy to break the lower hooks during disassembly of the cover - especially on the first attempt, when you not know where to pull and where to push. This part fixes a broken hook for a fraction of the cost of a new cover. The stump of…
https://www.patreon.com/posts/76588588 https://www.patreon.com/posts/77263483
This model is compatible with the lego system.
![LEGO PART 93609 Arm Skeleton [Bent / 2 Clips]](https://media.printables.com/media/prints/793593/images/6148152_872d3d2e-3ce0-4d42-bb01-11cba1556566_85b42fb8-8e5e-40ad-8ba4-95440b49d6d1/250x250plego-part-93609.jpg)
