Counting matching models…
This is the exhale Adaptor that's design to fit with all my other filter capsule. It is designed to filter out the air you breath out, just incase if you got sick and this will prevent the virus from spreading. Print instructions Print…
Gwr 61xx 6100 class model rail model train british rail
Simplified model of a remix. Reduced file size by 125x. The original STL is 250 mb, and the new STL is 1734kb. Also included a 3mf file. I made mine with a resin printer (Elegoo Mars 3 Pro) using Elegoo's ABS Like resin Originally found…
a6700 Users - The Grip does not fit because of the reworked mode-switcher, use the following remix by @shoyler_79369 (UNTESTED) : Extended Grip Printing instructions: Use supports when printing the model, otherwise you will not be able to…
SHIMANO Deore Brake level piston guide
This model is compatible with the lego system.
protection for x6100 ham radio.t the last 4 files are updated. everything should line up. you will need to flip the last file. it uploaded on the wrong side. ive printed many version without supports.
Snap-on protective side panels for QRP Ham radio Xiegu x6100. Very accurate model. No supports needed. You just need to slightly abrade surface of the holes and pins where is meets the hole. Then push the 8 pins into the holes, no need to…
Requires a BNC angle connector!
I recently got a Macintosh Quadra 610 and nearly all of the internal plastic (and some of the external plastic) was shattered, just a byproduct of the era. I like adding SD-card hard drive replacements to my machines and since the drive…
4x M4 x 40 screws needed for the 6100 or 4100 firewall (optional) velcro tape for the powersupply (optional) c14 to c7 adapter v5.0 with enhanced stability v4.2 1st online release Print: front to print bed (look at the print 3mf)…
Desktop stand for Xiegu X6100 with a 6010 12v cooling fan mounted behind and cooling channels behind the radio. This remix idea from on2on and jeff_j3ffr3y. STEP and STL are modeled at 1000% due to an error in original STL import before…
This is a remix of thing:1118084 by Roy Edwards . This is a wall mount for Philips Sonicare HX6100 chargers . It's intended to be mounted to a wall or tiles using double-sided tape such as 3M VHB and resembles a Feller light switch to…
Obal na glo Hyper Pro (model G6100) / glo Hyper Pro cover (model G6100) + koš do auta na použité náplně / car bin for used refills - https://www.printables.com/model/1269841-glo-kos-do-auta Pokud se vám model líbí, tak budu rád za ukázky…
This case was designed to mount the radio to a molle panel and still allow access to the controls. Sides left open to allow removal of the radio without removing connections.
I recently got a Macintosh Quadra 610 and nearly all of the internal plastic (and some of the external plastic) was shattered, just a byproduct of the era. I wanted to add a CD-ROM drive to the machine so I needed a new drive sled, so…
I recently got a Macintosh Quadra 610 and wanted to add a CD-ROM drive to the machine so I needed a new bezel that would fit an old caddy loading CD-ROM drive that I had on hand. Here's what I came up with. If you'd like to mess around…
Caisse C61000 a l'échelle HO
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
Xiegu X6100 Chassis Bottom Plate Remixed for 1/4x20 Threaded Insert for use on tripods and other 1/4x20 threaded accessories. I had to modify my threaded inserts by cutting to length with diamond cutoff wheel in a rotary tool. Affiliate…
simple and easy to print!
I originally had an old phone mounted on a similar mount, but it was using some freeware, that had not so great quality. So i found the DCS-6100LH for ~9€, and it gives me 1080p, can reccomend for the price.…
This is a replacement expansion slot cover for the back of the large pizzabox macs of the late 68k era and early PowerPC era. The Centris/Quadra 610 and the Power Macintosh 6100 among others. Included are several versions with various…
Philips sonicare charger HX6100 Skadis toothbrush hanger Printed with normal auto generated supports (don't try tree support trust me) 75% gyroid infill, 6 wall loops, printed using outer brim but im not sure its necessary fits every…
Have you broken the original rear bumper mount? Print this model!
This is a cover to protect the Hirose FX2 Connectors On the Xeltek Superpro Programmers when adapter is not in use. Print in your choice of material, I found with PLA that a .2 layer height works the best for fitment. Hope this helps…
There are one or two 3D printable shelves on the internet designed to hold a Sony A6100 Camera but none are designed to accept the camera without first removing the Peak Design Capture plate. The shelf holds the camera ~18mm Away from the…
Evolution of another project corrected for PCB size, This is an Adapter Cover for the Xeltek DX0001 Adapter. PLA / PETG 2mm Self Taping Screws with wide washer.
This is a model I printed for my Xiegu X6100. This is not my model, I am uploading it from thingiverse. https://www.thingiverse.com/thing:6215606/files
Soporte para montaje de leds en Crawler RGT EX86100.
The model is a Philips HX6100 charger container for an electric toothbrush just put the charger through, roll the cord inside and close with a flap and you're done ! the whole thing is best printed vertically with tree type supports and…
This is an Internal Chassis replacement for the wide "pizza-box" style Apple Macintosh computers from the 90s that included an internal CD-ROM drive. Specifically, this part is for the Centris 610, Centris 660AV, Quadra 610, Quadra 660AV,…
Update: I added a version of the side plates with provisions for a strap These handles (which I printed in PETG) Attach to the radio by holding the ridge around the end plates. You don't need to take any screws out of your radio to…
So first let's clear things up. This light is: NOT messy job site type of work light. NOT weatherproof. NOT passively cooled. This light is for individuals who want: Natural color lighting (High CRI of 90, no color shift). Bright and…
Apple Power Macintosh 6100 / Quadra 610 - Expansion Bay Cover
I wanted to use an HDD cage salvaged from an old Dell C6100 for my storage server, but the drives were getting very hot even with spaces left between them, so I thought up this contraption. When inserted in to the middle HDD slot, it…
Drive part below the multifunction robot for OHMEX SMX6100BLX
This is a build toy based on the Holborn 6100, a rather unique ecosystem of mainframes, computers and terminals. It's not an exact reproduction, but it includes most of the visual highlights. Parts There are 11 main parts, these can be…
Printed on a Prusa with PLA 0.2 mm
Used to mount 30mm wireless speed sensors to exercise bike. The flywheel didn't have a hub to mount the sensor to, so I designed this Thing. Meant for a Sunny Heath Asuna Sprinter 6100. May work for others. Print Settings Printer: Rafts:…
Wall-mounted bracket for the 6100 Shimano e-bike display.
Ein einfacher Adpater um die Kurbelschraube mit einem Schraubenziehen fest zu machen. Mit PLA und 6 Perimeter in 15min zu drucken
thumb rest tested with a Sony a6000. Bigger cutout and rest for the thumb for easy access.
Use a filament that will be safe around engine bay temps. I used CF Nylon 12. Seems to be holding up well. Use Tpu for the gasket. 100% infill for both parts.
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
Print on pad surface, use 95A (or any) TPU, I printed mine with 100% infill. Should just slip onto your vice and keep on by friction (close to the original)
Inspired from: https://www.thingiverse.com/thing:6273536 Not a re-mix as such, just a different approach adding two more sizes. one for a PL259 plug and the other a BNC plug. you can edit these and add callsigns etc at Onshape. PL259…
Update: I added a version of the side plates with provisions for a strap These handles (which I printed in PETG) Attach to the radio by holding the ridge around the end plates. You don't need to take any screws out of your radio to…
There are one or two 3D printable shelves on the internet designed to hold a Sony A6100 Camera but none are designed to accept the camera without first removing the Peak Design Capture plate. The shelf holds the camera ~18mm Away from the…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
I originally had an old phone mounted on a similar mount, but it was using some freeware, that had not so great quality. So i found the DCS-6100LH for ~9€, and it gives me 1080p, can reccomend for the price.…
