Search results: 681

Smallrig cheese plate 1681

Minimum settings for fastest print !Very fragile! 0.3 layer height 2 walls 2 top&bottom layers 10%infill (i used Cross Hatch)

Lego Compatible (5681.dat) Minifig Headgear Helmet with 5 Spikes SW Moff Gideon with Visor and Cheek Indents Pattern

This model is compatible with the lego system.

HPI RS4 47T Spur Gear (HPI 76817)

This is a replacement spur gear for the HPI RS4 Evo3+. Its part number HPI 76817 (47T). It might fit other RS4's too. I don't have high hopes for this one but i literally can't find replacements to purchase online. I printed it in PLA…

Connector 3PIN Ws2812b SK6812 12mm Dupont

3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…

Floatboxx LED Holder (SK6812)

The LED holder on the floatbox site does not fit sk6812 LED strips, which was my preferred choice of strip for this build. SK6812 has excellent output since it has a dedicated white channel. I've altered the interior slot to accommodate…

Aneng 681 stand

I wanted a nice stand for my smart multimeter i added a single piece of tape inside to make it hold the multimeter inside and stop it from rattling.

Arcade Button NeoPixel (WS2811, WS2812B, SK6812) RGB LED Mod

This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…

Very Small Fidget Spinner (681 bearings)

Lego Compatible (64681.dat) Technic Panel Fairing Smooth #5 (Long)

This model is compatible with the lego system.

6812 (60×78×10 mm) 3D-Printable Bearing – Uses 6 mm Airsoft BBs

his is a fully 3D-printable 6812 deep groove ball bearing designed to use 6 mm airsoft BBs as the rolling elements. It’s meant for light-duty applications, experiments, or just as a fun demo of how bearings work. I’ve tested it in PLA,…

Theo Klein 6812 Bosch Staubsauger Vaacum Battery Cover

A battery cover for the Bosch Theo Klein Kids Vaacum. When your kid drops the toy the battery cover can break easily. We have two of these and the cover is broken on both.. but this print is much stronger than the original.

Lego Compatible (6813.dat) Suspension with Fender and Axlehole

This model is compatible with the lego system.

Aneng 620 multimeter holder for honeycomb storage wall (maybe aneng 681 and others)

Aneng 620 multimeter holder for honeycomb storage wall (maybe aneng 681 and others) it will fit a multimeter with dimensions at bottom 22mm x 75mm

Superlux hd681 / AKG k240 detachable cable mod

I wanted a way to add a mini xlr female connector to my Superlux hd681 headphones. There is an existing design, but it looked too fragile and does not use a mini xlr connector. This part allows you to use a 3 or 4 pin mini xlr. I need to…

Panasonic KX-TG6811 Holder

Update (03 Jan 2019): Version 2 added. More ergonomic, more beautiful, more balanced! After buying my Panasonic KX-TG6811 DECT phone it turned out that its handset cannot stand on flat surfaces on its own like my old Panasonic phone did.…

Einsteckmutter für Kennzeichen VW OEM 357868143

Einsteckmutter OEM 357868143 für Unteranderem : Vw Bus T 3-4 Golf 1-2-3 Passat B2 -32B-35i -B3 Polo 1-2F Vento und und und......

SK6812 Mini-E Socket

This is a socket for SK6812 Mini-E RGB LEDs which come in a tiny SMD package. In contrast to the SK6812 ( socket can also be found on printables ) it is much easier to solder. This socket helps soldering wires to it, provides strain…

Seadoo / Sea-doo Wingnut 232681100

WIngnut for the back of the pto cover. Print with 100% infill in your choice of filament. The nut is threaded but for proper fitment run a 8mm x 1.25 tap through and then it threads perfectly.

Vacuum Nozzle Holder compatible with Rowenta RO7681

Nozzle holder compatible with the Rowenta RO7681 to hold the small brush and crevice nozzles. Hole diameters: 40mm, 45mm

Band wire winding for (1552.81 - 1 681.75Mhz) helix antenna

The stem enables to wind antenna coil for 1616mhz. The polarization is circular and stem It contains both - left and right hand path(L,R). You can chose desired polarization base on your needs. If you transmit an signal using satellite…

Superlux HD-681 (AKG K240 Clone) - Flexible Headband Replacement

The STEP files are probably the main files you're looking for if you want to slice this model yourself. The original headband of me Superlux HD-681 (which seems to be an AKG K240 clone by shape and possibly by function) started to show…

HW-681 Case

This is a simple case for the HW-681 charger board. It uses two M4 screws to mount and hold the case together. Silicone can be used to glue the case and board together. Recommended filament is PETG but other could be used.

Audio jack cable protector for Superlux-HD681-EVO Headphones

This a very specific print for Superlux-HD681-EVO Headphones It is meant to help protect the audio cable and jack. The jack connection where it is plugged into the ear peace is known to be a weak part on these headphones. No supports…

SK6812 Socket

This is a socket for SK6812 RGB LEDs which come in a tiny SMD package. The package dimensions are 5mm by 5mm with tiny solder pads. Wires soldered to it will break off the pads due small surface area. To allow soldering wires to it, I…

Ersatzteil OEM 893853681 Audi 80 B3 Armaturenbrett

Ich habe auch den Passenden Schlüsselanhänger dafür ;-)

Smallrig 1681 with fillet

Based on Smallrig cheese plate 1681 by Mikhail Shulman Fixed minor geometry at one corner that i feel somewhat asymmetrical 1mm fillet on the sides

Box case for HW-681 power converter Dual USB Charger board 3a (6-26v to 5v DC-DC)

This box allows you to protect the circuit in the HW-681 charging module. The charging module allows (on my board, see details on others) an input range of 6-26v DC and has an output of 5v DC up to 3a between the two ports. The design…

Superlux HD681 AUX Port/Removable Cable Mod

I've decided to buy the Superlux HD681 Headphones and mod them to use a detachable cable with them (and with the V-Moda BoomPro Microphone). I didn't find any tutorials on how to do this so I decided to do this on my own. I've bought…

Apex Qi Charger Phone Stand APX-6813

Made a charging phone dock for my Apex Qi charger. This charger is quite a bit larger than other Qi chargers. The dock has a tunnel for the micro-usb cable to go through. Regarding infill: I printed the base at 8% to save time and…

Bench Stand for Aneng Smart Multimeter 681

Bench Stand for Aneng Smart Multimeter 681 The multimeter is not supplied with a rear stand, as is normal, so I designed this small stand for it. Printed at 0.2mm with PLA. I've included a STEP file as well as an STL so alterations, if…

Vise - 681 lb Clamping Force

The vise uses a combination of 3D printed parts and metal hardware to create a product with good versatility and strength. The rated clamping force is 681 lbf, although I had no way to properly test for that. Try the project for yourself!…

Button base for Novy ceiling hood (Pureline compact 6810)

EN Version : One day, I was cooking at home, feeling a bit frustrated with how my day was going. When I pressed the light switch to turn on the hood lamp, I pushed a little too hard, causing the button to sink into the base of the hood.…

LED Strip Holder SK6812

i needed an LED-Strip-Holder for my BTF_Lighting SK6812 RGBW as i wanted an light overkill im my lack enclosure. i found and printed several models but chose to create my own one as i have not found one that fit all my needs. One part is…

25mm diameter round tapered computer foot with hole for screw for Gateway LX6810-01 and other PCs

Pretty simple design. 25mm diameter at the base and tapers to 20mm top. It is 7mm tall. Screw opening diameter is 9mm and the small hole for threads is 4mm. There is a 3mm gap between the stop for the screw head and the bottom of the…

(WIP) Samsung Galaxy Fame s6810 case

Originally published here: (WIP) Samsung Galaxy Fame s6810 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. For different reasons, I have trouble to test some of the phone cases I have…

Furlihong 680 681pbh pickleball machine throw reducing pad

I needed to reduce the power of my 681 in order for the ball to bounce before shooting over my small patio, this slide on TPU pad absorbs some of the push. you can play around with where you place the pad on the machine's arm to change…

HD681 Earpad quick release

I made these as a way to quickly detach the foam pads for cleaning or switching to the PU-leather ones via magnetic connection with the screws on the HD681 Evo Headphones. I used 4-5 tiny 6x1mm magnets per hole that fit the Screwholes.…

Lego Compatible (64681.dat) Technic Panel Fairing Smooth #5 (Long)

This model is compatible with the lego system.

Ersatzteil OEM 893853681 Audi 80 B3 Armaturenbrett

Ich habe auch den Passenden Schlüsselanhänger dafür ;-)

Superlux hd681 / AKG k240 detachable cable mod

I wanted a way to add a mini xlr female connector to my Superlux hd681 headphones. There is an existing design, but it looked too fragile and does not use a mini xlr connector. This part allows you to use a 3 or 4 pin mini xlr. I need to…

Very Small Fidget Spinner (681 bearings)

Motor MY6812 12V 120W

the threads in the motor are M5 the thread on the shaft is M6(lefthanded) with a milimeter cut off at the top

Okroužek Toro Zdobička dortu injekce 260681

Náhradní okoružek na Toro Zdobička dortu injekce, plast, 8 nástavců, 150 ml 260681. Pro lepší přesnost doporuči tisk změnšin na 99% (záleží na použitém filamentu)

681zz 3x1x1 Nano Bearing

This is a sizing blank

KANLUX Asten 26681 mount adapter

The light has a standard horizontal mount (screws is in the horizontal line), and I needed a vertical mount (screws is in the vertical line) with a special hole for the power cable. That's why I drew this model. The model uses the…

681 Upswept Bowl

https://www.patreon.com/posts/63778631