Counting matching models…
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
A replacement hood release handle/lever for the BMW E28. This is a replacement for BMW part number 51231868556. This part was broken on my 535is which required me to use pliers to pull the hood release cable. I created this replacement.…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…
The holder is for the “Filter holder”, the 1 and the 2 cup Filter and the “De'Longhi DLSC058 Tamper” but the Plastic Spoon/Tamper also fit. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle, with supports. Using Extrudr…
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
This funnel clamps onto the bayonet lock of the portafilter of a DeLonghi Dedica EC685. It prevents loss of coffee during filling and tamping. It is modeled off a third party bottomless portafilter with a slightly looser fit than the…
Replaces drip tray so that you can fit a scale on the level under the group head
After creating a hexagon-style drip-platform for the Delonghi EC685 (to published yet), a hexagon-style tamping station must be created. For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has…
Trichter zum einfüllen von Kaffeepulver in den Siebträger, geeignet für alle Siebträger mit 51,5mm Innenmaß. Durch Skalierung kann der Trichter natürlich auch für andere Durchmesser angepasst werden. Lasst doch gerne einen Kommentar oder…
As I was working on my friends Dedica, I got worried about scratching the fairly cheap chrome coating on top. I wasn't pleased with availabe designs as they didn't account for the ripples on top of the machine, so here we go. Holds two…
This is a modified lid for the PCA9685 servo driver case by juh , designed to accommodate a board with a taller capacitor. The case fits my board perfectly, except for the electrolytic capacitor. Therefore, I created a lid specifically…
A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…
This model is compatible with the lego system.
Small tool set for use with a Godox TT685II flash. It consists of a small attachable diffuser, a Softbox and a SoftboxV2, which can be used as a diffuser, reflector or with a honeycomb grid. The diffusers are only 0.5 mm thick. So try to…
A bunch of people tend to replace the milk frother of the Dedica. Installing a completely new one is quite a drag, so the “lazy” method is to simply remove the outer part. This leaves people with the problem that the inner frother, which…
Front Bumper for some RC-Cars from Associated. Print with Support
The cap of the water tank from my De'Longhi Dedica Style EC 685 was broken so I printed a new one. :-D I made this with Fusion 360. You can support me if you want: https://www.paypal.me/mikebayer3d Print Settings Printer Brand: Anycubic…
The Normcore magnetic funnel i bought for my portafilter didn't fit as the magnet weren't sticking to the portafilter very well so i decided to design one by myself, inspired by many funnels that i saw on Instagram, using a rotating lock…
Print with any material you like, print orientation like you can see on the third photo, stick to wall with strong double sided tape, but first thoroughly degrease the surface, to make it holds better. That reminds me it's time for…
Portafilter holder for Delonghi ec685 as an aid when tamping. Suitable for the original portafilter and alternative 51mm portafilter with an outer diameter of 62mm. There are two supports. One with 30mm hight, for the original…
This model is compatible with the lego system.
Printed with Prusament Jet Black 0.3mm no supports are required.
I really liked the model by @Gypo_282797 and asked him for model files, but i never heard back - so I created my own version. Rather than to use magnets and scratch the metal tray, I suggest using double sided tape. This version was made…
For use with a delonghi 680/685 portafilter. Fits perfectly to a delonghi 685 and a graef cm 800. Put it on your portafilter, fill it with your coffee grinder, twist it half a turn and you are ready to tamp. Print Settings Printer Brand:…
GitHub - CaiJonas/DeLonghi-Dedica-EC885-EC685-modification Case for my first arduino project.
These feet provide a noticeable difference in sound reduction when using the Dedica machine. You can either directly print the feet with TPU or print the second version and cut whatever soft foam you have (~10mm circle, >3mm thick) and…
Espresso Tamper for De'Longhi DEDICA EC 685
Con esta base consigues bajar la altura de la base original de la cafetera y poder utilizar una bascula para conseguir las extracciones de la mejor forma posible. Recomiendo imprimir con material resistente a la temperatura para evitar…
A simple holder for funnel, leveler and tamper. Customize as you need or want. :)
Mount holds an MG-996R servo and a PCA-9685 PWM demultiplexer. It has holes for mounting on aluminum extrusion. The bottom servo sits in the housing (press fit) and the PCA-9685 attaches to the mounting posts with M2 bolts (10mm). Has…
This is a diffuser for the Godox TT685 II. It has the option to slot in a Grid. You should print it with transparent white filament. The main body needs supports for the grid slot. For the Grid use the modify_diffuser, set bottom and top…
This model is compatible with the lego system.
I'm using a bottomless portafilter for my Delonghi EC680 (similar to EC685), and it always annoyed me quite a bit, that the original cup holder has two holes where the coffee drips into, once the cups are removed, but now I only need one…
PCA9685 IC - 16-Channel High-Precision (12-bit) PWM Controller Holder
Needed a tamping station and i didn't find anything that could fit the Normcore 51mm 3 ears for my coffee machine. So i had no choice to modelize one for me at least :'-( A remix / Inspired from…
I just wanted to make a convenient stand for the parts of the carob coffee maker
18650 10x5 holder. Simply large holder to 18650 cell li-ion
I used Creality CR TPU with 15% infill. It's stiffer than original.
Just hanger for your 5G Fritz!Box 6850 modem. Fit if you take off two silicone pads. For mount this I recommend use with 3M or Scotch double sided tape. Before use you must take off two rubber legs from modem, maybe in the future i repair…
extended the top opening on the 51x20x3x32 version to act as a funnel, making it easier to pour the ground coffee in. I swapped the filter basket and portafilter body on my Dedica, but this model still fits the original parts. While…
This fixes a common fault on Dysons DC24 where the ball becoming loose and clunky and gets significant play up and down on the left side of the ball if you look at it from the front. This play can cause the ball to catch on the HEPA…
Portafilter hanger for the DeLonghi Dedica EC680/EC685. Might fit other portafilters with 3 knobs and a 51mm diameter too. The hanger can simply be attached to the side of the machine using two 3mm countersunk screws. Remove the top lid…
AJAZZ K685T Keyboard riser
A Case to hold a PCA9685 board and an Arduino Nano.
This is a small display stand for the LEGO 30685 TIE Interceptor set. It fits it pretty nicely and supports it from the bottom with a mount similar to a round 2x2 plate. The stand can probably hold more than just this particular set but I…
Designed to be used with a De’Longhi Dedica and a Eureka Mignon . However, it is not designed to fit into the Eureka portafilter holder .
decathlon not have parts for theyown stuffs so i print my own guard. Ref. : 968556 Square-shaft transmission, 7-9 speeds
Plamobil compatible toy chair - 6850246
Replacement gear for the Dyson Mini Motorized Tool / Mini Turbo Brush (my unit label: 158685-05 , 16.2V , 30W ), commonly used with Dyson cordless vacuums (often paired with Dyson V10 ). I designed this gear from scratch and printed…
Godox TT685 II Aufsteckblitzadapter für Makrofotografie, für Pringles und andere ähnliche Chips Dosen
FRITZBox! 6850 distance wall mount Have Fun, dont hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message.
Hy EDIT: added additional screw holes to mount the Firtzbox downside, please give me feedback if that works, because I didn't use it. Added because the Antenna is original on the backside also added TPU feet so it doesn't slip I designed…
Since I didn't have a 624 bearing at hand but plenty of 685's, I changed the wheel-thingy to make it fit. The pin of the counterpart was a bit too loose for my taste, so I made is a whiff thicker and I changed the part for the M3 nut so…
Extended to fit De'Longhi DLSC058 Tamper” and the Plastic Spoon/Tamper.
Replacement knobs for the Metabo TK 1685 and TK1688 table saws. The knobs are close to the originals in size and looks. They take m6 bolts or nuts. They probably also fit other Metabo tools from the same era. There are three options. A…
This Retevis RA685 radio mount fits to a bicycle handlebar with a diameter of about 21-23mm. You need: 8x M3x18mm Screws 8x M3 Square Nuts The square nuts are placed in the back-left/back-right parts, you need to pause your print at 8mm…
This is a mounting plate for a Dual 16850 Battery Holder. It allows screwing the battery holder to a surface without having to put the screws inside the battery holder. It prevents damage to the battery that could be made by using inner…
DeLonghi Dedica Tool Holder (EC680/EC685) It's covering up the cup tray and make storage space for your coffee essentials. The recess are 52 mm in diameter Tray is for 52 mm mesh disk Printing: Infill 15% geroid layer height 0.3 mm ( to…
I wanted to get rid of the DECT phone charger on my desk, but didn't want to drill additional holes into my wall, as I already have a large IKEA SKÅDIS area. So I fired up FreeCAD and designed this little adapter which fits the wall mount…
Just saved it as STL because of some problems with the OBJ file.
Inner diameter of the model: 61.5mm Top fill pattern that works well: Archimedean chords
There's a version with only more room for cables from below (not recommended), but also the most recent version, suitable when guiding cables from the back.
Many flashlights come with a plastic casing for 3xAAA batteries, but they are also compatible with a single 16850 battery. This is an insert that holds the battery inside. Print without supports. 100% infill I used PLA+ @ 35mm/sec speed,…
This model is a zero clearance block for the fence of the sliding table of the Metabo TK1685/88 table saw. It aims to reduce tearout on crosscuts as it supports the material at the end of the cut. Below an example of a cut in spruce first…
Both a solid surface and hexagon cutouts versions with the re-centered drop hole available. Onshape model: https://cad.onshape.com/documents/5134cd5078995c7872fe569a/w/66e8063fb60a4b2ade631418/e/db891b3d251d4bd29f919477
Hey guys, I’ve recently been fixing a DeLonghi EC685 espresso machine. The issue was cracked connectors, so I’ve redesigned one of them—I’ll add the second one later. Just a heads-up: keep in mind that these connectors are located on the…
Easy print to place your portafilter on top of the Dedica EC685 to save some space. Fits a 16mm ⌀ portafilter (but can easily be upscaled in PrusaSlicer with the measurement tool) Print with small layer height for best appearance (0.1mm)…
A tamper is a device used to compact or flatten an aggregate or another powdered or granular material, typically to make it resistant to further compression or simply to increase its density. Wikipedia.
Edit 2025-03-08: After a few weeks I decided I wanted a closer shave so I've added a version 2 (V2) that shortens the tines, adds more tines, and moves them closer to the blade. It also rounds the face-interface and adds a thumb-push to…
Simple vertical base for Nighthawk R6850 Router v1 → first model v2 → second model with some rounded corners printed in Atomic PLA - no supports, variable height modifier, brim (always)
Increased the height of the original model two 12u.
Ce modèle est un fichier STEP représentant un roulement à billes 685ZZ , non destiné à l’impression 3D , conçu pour être ajouté dans des assemblages mécaniques dans un logiciel CAO. Il modélise un roulement standard (5x11x5 mm) avec…
When running 240V circuits (in US), the orange Wagos are not appropriate but the larger 221-485 blocks fit the bill perfectly. I think max amperage is ~7 on the orange Wagos and my suspicion would be anyone running 240V in the US is…
Hello to everyone! A couple of months ago I bought a Delonghi EC685 and joined to the coffe lovers community. This is the tamper station for the original Delonghi EC685 portafilter. Before creating this project, I tried to find something…
Compatible con el grinder del siguiente enlace https://www.printables.com/model/747940-umikot-51mm-base-for-delonghi-ec680
Moded main housing to reuse voltage meter from original fat shark batteries. Covered the volt meter PCB with Super Corona Dope to protect it against ESD and damage. Exposed PCB looks better. Category: R/C Vehicles
A very simple 'holder' for 2 portafilters for Delonghi EC685 or EC785. They are different in handle diameter, print with support.
For my GODOX TT685 I designed some light shapers. The base unit slides on the lighthead of my flash. It is lined with some textile tape (aliexpress textile tape for cable looms). Nice tight fit and no scatches. For the grid you have to…
The spindle for the paper spool for my Kodak 6850 Photo Printer was missing, so I designed this replacement part. I didn't put much polish into it, but wanted to share it anyways. You need to manually split the .step file into the 4…
DE: Adapter für Metabo TK 1685/1688 Tischkreissäge auf Werkstattsauger mit 35mm Anschluß (z.B. Starmix). EN: Adapter for Metabo TK 1685/1688 table saw to shop-vac with 35mm connection (e.g. Starmix). Print Settings Printer brand: Creality…
My board didn't quite fit, so just trimmed some more room for the servo connector side.
Hello to everyone! A couple of months ago I bought a Delonghi EC685 and joined to the coffe lovers community. This is the dose ring for the original Delonghi EC685 portafilter. It can also be compatible with other 51mm tree-beam…
I needed a way to program multiple ESP8685-WROOM-05 H4 Modules for replacing in smart globes I got that were not compatible with home assistant. Printed. I used a 1mm drill bit to clean the holes for the pogo pins. If you need a model…
Needed to get my coffee machine 15 mm higher up to be able to place is on a tray without having the tray resting on the edge of the tray. Printed with PETG and 15% infill.
This is a small display stand for the LEGO 30685 TIE Interceptor set. It fits it pretty nicely and supports it from the bottom with a mount similar to a round 2x2 plate. The stand can probably hold more than just this particular set but I…
Replacement knobs for the Metabo TK 1685 and TK1688 table saws. The knobs are close to the originals in size and looks. They take m6 bolts or nuts. They probably also fit other Metabo tools from the same era. There are three options. A…
For my GODOX TT685 I designed some light shapers. The base unit slides on the lighthead of my flash. It is lined with some textile tape (aliexpress textile tape for cable looms). Nice tight fit and no scatches. For the grid you have to…
PCA9685 IC - 16-Channel High-Precision (12-bit) PWM Controller Holder
Replacement gear for the Dyson Mini Motorized Tool / Mini Turbo Brush (my unit label: 158685-05 , 16.2V , 30W ), commonly used with Dyson cordless vacuums (often paired with Dyson V10 ). I designed this gear from scratch and printed…
I desingned a low profile filament roller for my needs, and i share it with you. Use 4 ball bearings 685zz (5x11x5). Fitting of parts is pretty tight and firm, so better print with random seam. You can use glue on the connecting rods if…
Hey guys, I’ve recently been fixing a DeLonghi EC685 espresso machine. The issue was cracked connectors, so I’ve redesigned one of them—I’ll add the second one later. Just a heads-up: keep in mind that these connectors are located on the…
Inner diameter of the model: 61.5mm Top fill pattern that works well: Archimedean chords
This model is compatible with the lego system.
I desingned a low profile filament roller for my needs, and i share it with you. Use 4 ball bearings 685zz (5x11x5). Fitting of parts is pretty tight and firm, so better print with random seam. You can use glue on the connecting rods if…
When running 240V circuits (in US), the orange Wagos are not appropriate but the larger 221-485 blocks fit the bill perfectly. I think max amperage is ~7 on the orange Wagos and my suspicion would be anyone running 240V in the US is…
