Counting matching models…
If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky Flexi fish mini - cca 6cm long Mini flexi rybka - cca 6cm dlouhá jde tisknout z PLA i PETG / can be printed from PLA/PETG
https://hazbinhotel.fandom.com/wiki/Alastor Alastor is the infamous entity known as "The Radio Demon" and is one of the many powerful Overlords of Hell. He has offered to assist Charlie in her endeavours, albeit, for his own amusement. He…
After a successful print, rinse with water for a smoother finish. Mini Pocket Slide Box – Compact Organizer in 3 Sizes Keep your small essentials organized and secure with the Mini Pocket Slide Box. Featuring a smooth sliding lid and a…
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
A remix of the simple IKEA Skadis headphone holder, which is made for wider headphones/headsets. The holder is available in 3cm, 4cm, 5cm, 6cm. I also added 2 holes to save filament. Supports where are necessary for printing. Update…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
This model is compatible with the lego system.
You will have to disable loops to fit it on. Test model included. Carefully wiggle them apart, some you might have to twist loose. I didn't break mine but tried to be careful.
The rear speakers were blown in my car. They're an odd size, and not easy to directly replace. I found there's a bracket, SAK-1203 to mount 5.25" speakers in the rear without modifying the car. Those adapters aren't easily available in…
USRockets did an amiazing job on R2D2 that I have whipped up several heads, I have sucessfully printed this and will post pics of the finished painted model soon. Other components can be found here…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
halo gun by https://www.thingiverse.com/thing:5494304
I updated my original wand . This version is longer, stronger and easier to print. The wand is hollow and you can use this space as a secret compartment. To keep this wand simple, I did not add the LED light (for a wand with light, use…
ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…
https://hazbinhotel.fandom.com/wiki/Alastor Alastor is the infamous entity known as "The Radio Demon" and is one of the many powerful Overlords of Hell. He has offered to assist Charlie in her endeavours, albeit, for his own amusement. He…
Description This compact tripod shrinks down to tabletop size or expands up to a full-sized floor-standing unit. Each leg consists of 4 sections that lock in either the fully extended or fully collapsed position using a quick 1/4 turn…
Remix of the Vacuum Nozzle by @3d7r1x to 16cm intake width for much speedier work on large carpets and textile furniture. Stabilizers added to prevent deformation of the nozzle from suction forces. Printing Advice: Bed Adhesion : Use a…
This model is compatible with the lego system.
Make the transponder of your dreams! The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code is under…
The Halo series, developed by Bungie, holds a special place in my heart. Halo was one of the first games I got on console when I was younger, and I’d followed the series and many of the books for far longer than I’d stuck with most…
I designed these clothes hangers for the size of children's clothes. We have our first newborn on the way and of course I wanted to print usefull stuff. I couldn't find any nice printable clotheshanger so I designed them myself. The idea…
Very simple box design for making wired/wireless speakers. Also my first 3d design. Sorry for any mistakes. I used nuts and bolts to mount speaker and hotglue for bottom. Fill with insulation for better sound. Hole diameter is 143mm / 5⅝…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
I modelled this cup for my Son, so that I am able to stretch the Z axis (increase height of cup) to create taller or shorter cups depending on how many dice he wants to stack. Printed on a Prusa MK3S+ with the fuzzy skin option on outside…
TAKES SOME .25 IN DOWELS AND IS SPLIT IN PARTS WITH A REMOVABLE MAG. Category: Props
2025.06.10 Update: I re-modeled this as I've learned quite a bit since I first made this. There is now a version without cutouts, because some IKEA KUGGIS boxes don't have them for some reason. --- I needed a Gridfinity insert for the…
Work In Progress, F-16C Block 50, ICP (UFC for us old school DCS peeps) All buttons fit best @ 97% scale, though some are slightly loose Text on buttons is too small for a 0.04mm print head Added 2 backplates, "Thicker" version worked…
Print face down with as many pins as required
I made this for my brothers Whale Fin plant, thought everyone else might like this too. The design of the planter was ment to look similar to a mid century planter with the white pot and the wooden legs. Of course, the design also…
3 different Lista tray boxes for drawers
Un tubo tapado de un lado, medidas, altura: 6cm, 3cm, y el grosor de las paredes y de la tapa no removible, es de 1cm
Compact stand for Rockwell 6C or 6S with all its plates. Can be used with razor assembled or completely disassembled. Holes are for water drainage.
For an Internet of Things Arduino class, I made a modded version of an F-16C Viper flight stick, and for an Arduino Mini and some Arduino kit supplies, the game I was playing at the time of making it was Elite Dangerous, and so I put the…
The moss should grow outside the grid after a while. I will update the pictures in a couple of weeks.
Set square for art class! Great model and very tough if you are not paying 15€ Faber Castell
Gridfinity bin for Rockwell 6C or 6S razors. It's only 1x2 units big and can hold either assembled or complete disassembled razor. Bin was generated by FusionGridfinityGenerator plugin for Fusion 360.
The unlock button on my 2005 Peugeot 206cc key fell out. Fortunately I remembered seeing one on TV. Unfortunately, my button is 11mm in diameter, whereas the one I found is much smaller. So I grabbed his, remodelled it, and this is the…
Mount / holder which I have created to mount my IP camera EZVIZ C6C to watch our guinea pigs when we are not at home. Really simple, works well, and also with really low filament consumption :) It can also be remixed for different…
The goal of this project was to create a 1RU Chassis for a DeskPi Super6C Cluster, and the ability to add the new Turning Pi 2.5 later down the road side-by-side. The current sub-assemblies include the following designs: - Short Rack Ear…
Vánoční koule průměr 6 a 8cm s otvorem pro háček Christmas balls 6cm and 8cm with hook hole
Just a miniature rake + extension to get the little bits from under your printer. 8mm tall fits anywhere. No support
Adjustable upgrade for G36 stock (doesn't affect foldability). I put some foam between the mounts and the stock to reduce the clearance. Use M3 nuts and screws. my designs: flash hider: https://www.thingiverse.com/thing:2364355 short…
Flat and long vacuum nozzle. Dimensions: 35mm hose (doesn't need to be perfectly 35mm) 10.5x35mm nozzle, so flat short: one part only: ~25cm long: two parts connected: ~46cm Print options: printed from PETG seam position: random (I like…
This project was for my little sister that wants to make clothings for our upcoming brother or sister. Please feel free If you like this model and you want to support my work that I am making, you can donate me if you want with paypal:…
Molle containers with internal diameter of 41mm and 62mm. The larger container will accommodate an 11x46cm (18 inch) medical splint. Pojemniki molle ośrednicy wewnętrznej 41mm i 62mm. Większy pojemnik pomieści szynę medyczną 11x46cm (18…
Wallholder for rockwell razor. It's a bit difficult to get the razor in at the beginning, but when the razor has been used 20 times it fits perfectly. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 25%…
This takes the original “ Slim Gridfinity Base for Ikea Alex Drawer " and modifies it to work with the taller 36x116cm Alex drawer unit by removing the spacer, some of the clips, and the two smaller base plates. With these changes it…
As i have two speakers in the doors, but didn´t have good place to put my phone, i used the place where the speaker in the middle once was. If you just need a cover for that, feel free to use the “blanko”-version. The phone version is…
a funnel with a large opening for filling jars and containers with cereals, spices, nuts, cornflakes and much more I use the funnel to fill pellets, flours and feed particles as well as ground bait mix for feeder fishing into suitable…
Just another hook for orgnizing the multimeter…
A trimmed down version IKEA Kuggis Gridfinity 3x5.
I was really satisfied with the cover for my Merkur 34c so I made one for my new Rockwell 6C. This cover fits nicely but not too tightly to avoid trapping water inside the cover as much as possible and can be used with all the plates.
I wanted to use my 8mm (3mm depth) magnets for this also remixed the bin to have 6cm overall width
Needed to design a Monitor Riser Box for my colleagues. So I added 2 drawers to utilize the space and everybody is happy! Size 20cm x 20cm x 6cm height. You can use PLA, PETG, etc., the drawers are identical, they need support for the…
Clone Engine Piston Ring Compressor 196cc v3 just pinch with your fingers.
Introducing the "Plant Water Plate for Cultivation Pots 6cm" – your ultimate gardening ally! This innovative accessory is expertly designed to enhance your plant cultivation experience, ensuring your beloved greenery receives the optimal…
A small pen you could attach to "Flying tiger Copenhagen" notebook and carry with you. The need for this came with an idea for very small EDC notebook , buisness card sized . Printed on prusa MINI with Recycled PLA from Fiberlogy. The…
Parimeters: 1-3 Layers: Top/Bottom 5 Infill: 10-23 Filament: PETG as it is food grade Can also be printed in Vaze mode, recommended Nozzle size 0.6, if not 0.4.
Description Needs : Height Ø165 mm Radius Ø75 mm Linen or cotton wick Ø6 mm Paraffin Wax casting temperature: 60 - 70°C (PETG is more temperature resistant) No leakage if the tightening is correct. Wait 12 hours to unmold
Bracket must be printed in PETG (or similar). Would recommend adding a bit of foam between it and the speaker back. Mount can be printed in PLA . A small, paint-on support for the cut-out bit is ideal.
6x6cm (2 ¼ x 2 ¼ in) film holder I use to copy medium size negative from Hasselbald to digital by copying directly with digital camera. It is one piece print fitting straight on to Prusa mk3s with PLA. 20% infill seem plenty. Hinge…
🌌 ¡La esencia del mejor amigo en estilo Funko! Capturamos la mirada bondadosa y espíritu juguetón del Labrador en un diseño minimalista perfecto para amantes de los perros. 💡 ¡Alegría canina para cualquier espacio! 🏠 Figura 10cm: Ideal…
This model is based on the entry 6cgr from the protein data bank (PDB), presented in this publication: Dai, X., & Zhou, Z. H. (2018). Structure of the herpes simplex virus 1 capsid with associated tegument protein complexes. Science , 360…
Replacement for the selector plate of the Jing Jong G36C G608 airsoft.
🌌 ¡La esencia del Schnauzer capturada en formas geométricas audaces! Este diseño minimalista reinterpreta la silueta característica y barba icónica de la raza mediante ángulos limpios y planos facetados. 💡 ¡Moderniza tus espacios con…
I design a compact case JMD0.96C. DISPLAY 128x64. It includes cutouts for pins. Be sure to have the same model otherwise it doesn't fit as well as you see in the picture. If you need help or you want to be printed this parts or customized…
Ein kleiner Fidget Spinner PRINT IN PLACE wird ohne Stützen funktionsfertig gedruckt. Nach dem Druck sind noch je zwei 1 Cent Stücke (€ Cent) in die Taschen der Ausleger zu pressen bis sie unterhalb der Rasten sitzen. Jetzt empfiehlt sich…
Box with lid 12,5 cm x 6cm x 5cm For the hinge axis use a piece of fibre Box suitable for: https://www.printables.com/model/555766-balance-game-tetris https://makerworld.com/en/models/83962#profileId-89753
Needed a 6cm x 6cm bracket/brace for the a homemade bed frame leg. downloaded a few and tried resizing without success, so another bracket and freecad file available Category: DIY
Filament spool adapter Inner diameter 3cm Outer diameter 6cm Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Eryone PLA Category: 3D Printer Parts
You'll need: 4x M2 25mm screws 4x M2 Nuts The photos represent the best way to print the models Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.28 Infill: 20% Filament: Colourfill PLA Black…
Made a quick and dirty VESA riser to get my monitors a bit higher. Holding up just fine for a couple months using PLA with 25% infill and 6 perimeters with a 0.6mm nozzle (9 perimeters with a 0.4mm nozzle). Needs 4 M4 threaded inserts and…
Simple wall-mounted holder for glove boxes. The design is tailored for boxes measuring 220 × 115 × 60 mm, but it may also fit other glove boxes of similar dimensions. Printing recommendations: I have printed this with these settings:…
I created some amplifier circuits for my virtual pinball project: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/ I build them on small, cheap uxcell 4x6cm perf boards:…
Material sparende Rampe für die Türschwelle
A spatula holder for wall mounting. As i purchased a higher-quality scraper with 60mm width i needed another holder. Moreover i have a nice housing so i wanted it to be wall-mounted. If you like my work and want to support it you can do…
🌌 ¡La evolución etérea de Dratini en estilo Funko! Capturamos la esencia fluida y las esferas de cristal de este Pokémon dragón en un diseño minimalista que irradia serenidad. 💡 ¡Un tributo a la primera generación! 🏠 Figura 10cm: Brilla…
This is a fairly simplistic fan holder for Noctua 40mm x 10mm Fans, including noise dampening. The fans are slightly pressed in the slots and make only contact with the rubber already integrated with the fan. It's designed to fit in the…
This is a proof of concept. You'll have to fight with it a few seconds to snap it in but it fits pretty well. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.28 Infill: 20%…
I had a profile gauge from Action/Werckmann which can take profiles about 13cm wide. For a project I needed to copy longer profiles and designed this double length 26cm frame. I bought one extra profile gauge from Action and reused the…
Quick new design for casting a silicone mold mainly used for resin buttons. I use a hot glue gun to seal the edges off.
A two piece design allowing you to use a Kiev TTL viewfinder on a Lubitel 166. This is so much nicer using this than the horrible waist level finder and even has a built in meter! This took many many reiderations with it being remodeled…
I'm confident there's a more affordable way to obtain a Gridbox for your little Pavo Tube, but when you have a 3D printer, you know how it goes. Specifically designed to fit a Nanlite PavoTube II 6C. In my opinion, the way I printed this…
This is a simple case for the Flysky 2.4GHz 6CH FS-X6B Receiver which does not come with a case. So is not very protected. Printed in ABS 0.4mm nozzle 0.3 layer height. May need a bit of a clean up around the cutouts depending on how your…
The big wedge at a width of 6cm. Also has been made 2cm longer. You will need 2 M6 30mm screws and 2 nuts. It is designed to be used with ~28cm x 6cm sanding paper. You should be able to cut a standard A4 sanding paper varies from 28cm to…
Open .3mf in orcaslicer
Ich habe hier eine Polo 86C Nummernschild leuchten abdeckung Konstruiert. Ich habe sie tatsächlich aus Pla gedruckt und hält seit ca 4 jahren. Nozzel 200 und 60 Bed Temperatur. Infill habe ich auf 25% Stützen Ja
This is the first 3D model I've ever shared , designed in Fusion 360! It's a horizontal wine bottle holder for two bottles , stacked one above the other, keeping the cork in contact with the wine and the label clearly visible — perfect…
Ein Sieb für ein 16cm breites Zusatzspülbecken. Strainer for a 16cm wide sink. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0,20 Quality Infill: 20% Filament: Prusament PLA Category: Kitchen & Dining
Nastavení tisku: 0,1mm - PLA I. vrstva do 2,4mm /black/ II. vrstva do 2,9mm /red/ III. vrstva do 3,1mm /black/ IV. vrstva do 3,3mm /white/
This frame was designed for photos printed with the Kodak P210 R Photo Printer and can be placed vertically or horizontally. Photopaper dimesions of this printer are 5.3 x 8.6 cm. The frame is tilted at 7 degrees backward for a better…
6 CD charger extractor based on the original metal one. Works very well! Category: Hand Tools
Ein kleiner Fidget Spinner PRINT IN PLACE wird ohne Stützen funktionsfertig gedruckt. Diese Version V2 unterscheidet sich in der Auflösung ( 0,15) und dem Smiley. Nach dem Druck sind noch je zwei 1 Cent Stücke (€ Cent) in die Taschen der…
Simple enclosure for the Inkplate 6COLOR.
Support me: Frame for Zink Paper 3"x2" (7.6cmx5cm). You can put it on the wall with double sided sticky tape or put it on your desk (check out inclined version) Check prices on amazon: Zink Paper tesa TACK double-sided adhesive pads Print…
Info: simple 16cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
Son 12 diseños 3d con una medida aproximada de 6 centímetros y un espesor de 1 milímetro para pegarlas en tus diseños 3d, en tu nevera o en cualquier cosa. Además también puedes usarlas como plantillas de dibujo.
Halterung Für LED Lenser Taschenlampen P6 und P7 Core Funktioniert bei anderen mit einen Griffdurchmesser von 21,50 mm
