Counting matching models…
I had some issues with the original version's thin walls on my Ender 3 v2. That's why I reworked the grille and the bottle holder. The grid now has a border outside and inside and the grid has a larger tolerance to the base. I designed a…
I needed a very strong basket to hold various things like LIPO Battery and oil, spray bottle, etc.
A simple token holder, round version, great for board games. You can storage multiple boxes on each other. Print instructions Category: Games Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,2…
Tool for opening and closing the oil filter cap on many VW, Porsche, Mercedes-Benz, BMW, Audi and Opel engines. I have not yet been able to test the tool. But it should fit and work. If not, please leave feedback. thanks Printing PLA+ 40%…
76mmx583R Shell (17-pdr) This Shell was used in the M4 Sherman “Easy 8” and Firefly Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re…
Storing airplanes can be a stressful trying to find a place to let them chill but why not let that dude hang from the Wall??! My family has been flying planes for over 2000 years, we all got together and figured this out. Well, using this…
I found other models of desk cable grommets, but none that I liked were for a 76mm hole saw (which is a standard size included in many cheaper hole saw sets in the UK). So I modelled this one while making new desks for our children. You…
I couldn't find any strainer for my kitchen sink so I made one myself. The nominal diameter of the drain is 80mm but it's rather shallow and has quite a big radius at the bottom. That's why this strainer is only 15mm high. The top part is…
Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easier to print but don't…
Set of adapter to connect a 76mm (3inch) hose to a 100mm (4inch) hose. Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs.
A wall mounted holder for the Kreg Automaxx 76mm wood project clamp. I only have this size of the clamp, but it will probably fit other sizes of the clamp as well. Printed in PLA, infill 40, bottom down with pain-on-supports under the…
This is a 76mm M32 Tank Shell and casing. So far, I can only produce the shell and not the case, so for now, the shell will be for the case, unlike the case.
Designed this air vent for my shed to prevent condensation and mold issues. It's sized for a 76mm hole saw. If anyone would like it generated in a different size, just ask. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts:…
Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm
Attention! The coil consists of two parts! Update: ESUN made new spool with diameter 76mm. Added v2 version It is too expensive to print adapters. The adapter should provide excellent clamping of the side faces, I will try to come up with…
Printed in petg for outdoor use, but other materials also suitable.
just another skadis gadget
19 inch rack front panel for two 176mm wide switches
1U 19 inch rack front panel mount for one 176mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
Where I had to place my Snapmaker A350 and enclosure didn't have a window or other convenient place to vent out of. Only thing nearby was a sliding glass door, which was fine when it was warm enough to open it, but otherwise I had it…
Needed a Y splitter / adapter for my 3 inch exhaust duct from my two printers. Could not find a model I liked. Commercial models on Amazon were about $12 and would take a week to arrive. So designed and printed this in Fusion 360. Printed…
The 76mm focus ring fits a Sigma 18-35mm. 76mm has 96 spikes 63mm has 75 spikes
Tipp: Nägel durch die zwei Löcher stecken, dann hält es von alleine.
In restoring my car I needed to replace the brake line which comes in a reel. Trying to straightening it by hand is impossible. Amazon has a handy tool which I thought one could design something similar and print it. This is the result. I…
Angle Grinder Disk Protector for 76mm Disk Bosch GWS 12V-76. Version 2 (files with V2 suffix) with better stiffness added.
Air vent tee fitting for 3 inch (76mm) flex vent tube. With Horizontal Wall Mounts (Use 3mf file to remove or adjust) 3MF included for remixing, resizing or re-orienting. *** NEW *** - Added bridge part to reduce need for supports inside…
2U 19 inch rack front panel mount for two 176mm wide switches These panel mounts require the DAP 2U MP-1 bracket. I have tested with cheap unmanaged switches: 8x 2.5Gb ports + 1x 10Gb SFP+ 4x 2.5Gb ports + 2x 10Gb SFP+ Print the front…
After printing Singh Design's Tape Dispenser Automatic Tape Cutter model, I realized the stock roller just wasn’t cutting it for the kind of tape rolls I actually use. The original part is sized for smaller rolls, but my setup demands…
This is a model of the M4A3E8 it's the wider chassis with a 76mm cannon turret mounted on top. The tracks and wheels are printed separately for easier printing and easier multicolor. The turret has a bushing to make it rotate smoothly and…
NOTE: I'VE UPDATED THIS DESIGN. I MODIFIED THE OBJECTIVE PLATE TO ACCEPT A SCREW-ON BAFFLE TUBE, ELIMINATED THE MIRROR NUT, AND ADDED A WASHER BETWEEN THE BAFFLE TUBE AND THE MIRROR. I'VE ALSO MODIFIED THE MENISCUS CELL TO TIGHTEN UP THE…
This is a Rakonheli sized Whoop frame!! PRINTED WITH NYLONX. I've revised the frame after several tests with the 1102 size motors. I recommend using the DYS 1102 10000kv motors for best battery life. The finished product weighs in at…
I made this after I got mad after my flashcards went every where this design is for flashcards 127mmX76mm it holds 200
This is an extended leg for the moonlander that allows you to tent the keyboard higher than stock. The leg has been ergonomically designed to allow you to stow the leg into the storage position for transportation. You can also achieve…
it hold your bottle, mounts to a skadis pogboard. simple - enjoy!
I do not trust the idea of just hanging a filament reel over a shaft and letting the extruder pull the reel hard enough to turn it. I prefer having the reel centered on a smooth shaft, turning easily with a light and steady "tug". Here, I…
EN This geocache has an overall length of 76 mm including the screw head. The hole with a depth of 70 mm has a diameter of 9 mm. With a rubber patch or silicone pad in the lid, the logbook should stay dry. The secound File is with 0.6 mm…
🪴 3" Square Planter – Built for Real Growers ***NEW*** Drip Tray: https://www.printables.com/model/1484429-3-planter-tray-smooth-finish-print Don’t let the clean lines fool you — this square planter means business. Designed with…
J'ai créé des tampon en TPU pour mon échelle en aluminium. Tampon pour profil alu de 76mm x 26mm/22mm.
This is a small spotting scope based on the 76mm Maksutov lens/mirror combo available from The Surplus Shed: https://www.surplusshed.com/pages/item/PL1298.html NOTE: This is a hugely popular item. Whenever Fred gets a new shipment, they…
*********The one in the photo is made specifically for myself, which include some weird size bit such as 1.5 & 5.2. The stl uploaded is suitable for more common size drill bits.*********** Hardware needed: 1: M3*12 2: Nyloc Nuts or double…
I just needed a bigger cup holder for my Miata, the one by Mirko looked pretty good but it didn't fit my water bottle so I enlarged it a bit. It is now about a 76mm inner diameter. The onshape file is attached:…
Simplest box for standard Bresser Messier solar filter.
Clip for 76mm belts to loop the excessive belt length on your simrig, so keep in mind it is not for fixing your belt to your rig it is useful when you used the normal belt shortener for fixing the belt to the stepper lever. V2: added some…
Holder for 76mm or 3 inch gridingdisks, for pegboards with hole spacing of 12mm
Needed a Spacer or adapter to adapt my microscope focus ring form 76mm to 74mm or microscope form 74mm to 76mm I know it is simple LOL but it worked.
Y Reduzierverteiler 1x 98 auf 2x76mm AD 1x in 2mm Wandstärke/1x in 3mm Wandstärke Y Reducing manifold 1x 98 to 2x76mm OD 1x in 2mm wall thickness/1x in 3mm wall thickness
Rangement disque mini meuleuse 76mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,28 Infill: 40 Filament: Geeetech PLA Grey Notes: Rangement disque mini meuleuse 76mm Category: Tool Holders…
Per request, here's a model with the specs provided. I have not printed this since I do not have fittings of this size and cannot test it. I recommend printing rings off each end to test the fit before printing the entire thing. This…
imprimée sur bambulab A1 avec AMS
Keep your workshop organized and find the right disc at a glance! This is a set of custom-designed holders for 76mm (3-inch) angle grinder discs , specifically tailored for small cordless grinders (like the Bosch GWS 12V-76, Parkside, or…
Die ganze Arbeit ist vorgestellt unter https://www.printables.com/de/model/869009/ Die +25mm Aufnahme der Gewindestange erhöht sich um 17mm um 4 Spulen 76mm breit in eine Samla 22l Box zu bekommen The +25 mm threaded rod holder is…
When i need a post-it i usually need to grab a pen so i added 2 slots for pen storage.
brúska 12 V PPWSA 12 A1
2x2x3U for 24 swatches with better fit (2.1mm slots) and feature simplifications Size: 2x2x3U (vs 4U from original) Features: Widened the swatch slots to 2.1mm (original model is line-to-line at 2.0mm) Removed top lip stacking features…
Remix of Anti-tangle Gravity spoolholder for MMU2S by @Forfelet, for bigger nuts (76mm)
I've found this Tapo C110 Clip but it doesn't fit my pipe diameter. So i've modded it so that it fits a 25mm pipe, works like a charm! Credits goes to BlushTTV and his original design:…
Adapter to connect the 3inch hose from Xtool Lasers to a 120mm inline fan. ID of fan adapter side is 122mm, fits perfectly on my 120mm inline fan. Hose sits flush without the immediate need for clamps, although using clamps is probably a…
Simple tape holder for duct tape, etc. using 76mm spools. Attaches using double sided tape or m4 or equivalent screws. Print in orientation shown in picture with out supports.
76mm Sticky Note Stand with Pen and Note Holder For commercial use: Cults3D ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E Support with…
Cajas de almacenamiento para rollos PLA de varios tamaños, también hay cajitas para almacenar el silicagel y placas identificativas del material y marca (las placas se unen a las cajas con imanes D8x1mm, estos se pegan con silicona…
Demi lune 30 degrés pour tube en 76mm, imprimer en PETG ou ABS
Demi lune 20 degrés pour tube en 76mm, imprimer en PETG ou ABS
Demi lune 15 degrés pour tube en 76mm, imprimer en PETG ou ABS
Demi lune 25 degrés pour tube en 76mm, imprimer en PETG ou ABS
A recent delivery truck backed into my tree even though I had the reflectors on it! These reflectors are not expensive to buy new but I decided to replace the frames since the lens parts were still good. There are two parts included. An…
Dvířka na skříňku s pojistkami 130x176mm
🪴 3" Square Planter – Built for Real Growers ***NEW*** Drip Tray: https://www.printables.com/model/1484429-3-planter-tray-smooth-finish-print Don’t let the clean lines fool you — this square planter means business. Designed with…
Adapter to connect the 3inch hose from Xtool Lasers to a 120mm inline fan. ID of fan adapter side is 122mm, fits perfectly on my 120mm inline fan. Hose sits flush without the immediate need for clamps, although using clamps is probably a…
Printed using PETG. These Power Supplies tend to heat up a lot, so I don't recommend using PLA, but you can try.
The old holder for the cutting disks broke, so I had to reinforce the design a bit and make it more spacious.
A snowflake wheel that was originally designed for a spool of tape, but all the walls make the spool too rigid to fit a tape roll on, so I scraped the idea. But, the file remained on my computer so I figured I might as well share it. It…
This model utilizes the original mounting plate/adapter. I just changed the outlet size for use with a 3 inch flex duct, aiding any clearance issues behind the printer. This is part of a add-on system I designed which you can find on my…
Model of the .50 BAT cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you want to add weigth id…
Filament Color Swatch 76mm x 36mm x 2mm Transparency gradient from 0.2mm to 2mm in 0.2mm increments Label area with square corners for 12mm printer labels (ie Brother PT-M95) I primarily use swatches just for colors and to ID the…
This must be used in combination with kozmickid's models. The objective slide has modeled in ridges to take the place of the slick strips. There are also two lengths for the OTA. The 174mm length is the same as the suggested size by…
This holder was designed to fit a stack of 76x76mm sticky notes from HEMA. Original Post-it notes will probably also fit, since they are the same size, but this hasn't been tested. This model can be printed with any slicer settings, but…
Just a simple holder for the 76mm cutting disc for my Bosch GWS 12V-76. It uses a 2x2 grid and fits about 25 discs.
This is a remix of another Ikea Skadis board watchholder. Thank you to the original maker and I tweaked the front size to fit a 3inch diameter watch band size.
Simple adapter for digital microscope allows to mount on standard 76mm arm from stereoscopic microscope a standard 40mm lens holder from digital microscope (MOS4k Pro in this case) with additional extension for standard ring light.…
This is a simple drawer that keeps all your stuff organized. Always in perfect reach. It's size is 249 x 176 x 60mm 💬 If this project was helpful, leave feedback – it's free for you, but it's a huge help for me as I create and share new…
One holder, endless locations. This 76mm internal diameter flask holder features a reinforced dual-screw mounting system designed for rock-solid stability. Whether you need your bottle secured to a car center console , a workshop wall ,…
I have printed this holder and mounted to my tool wall but wanted the option to attach it to my Skadis board so I combined the two design to make what you see today. I designed it so it could be printed without supports.
Honeycomb Storage Wall (HSW) 76mm Disc Holder
Printed using PETG. These Power Supplies tend to heat up a lot, so I don't recommend using PLA, but you can try.
This is a model of the M4A3E8 it's the wider chassis with a 76mm cannon turret mounted on top. The tracks and wheels are printed separately for easier printing and easier multicolor. The turret has a bushing to make it rotate smoothly and…
This Bocce Measuring Cup lets you quickly and accurately determine the winning ball in a game of bocce. Here's how it works. Place the Bocce Measuring Cup on the pallino. While holding the cup portion down, rotate the holder lid to point…
The main block can be printed in PLA, PETG, ABS, or any other sturdy material. The feet should be printed in a soft TPU for some grip. I printed at .38 but layer height doesn't really matter. I also printed it at 30% infill which makes it…
Customized version of https://www.thingiverse.com/thing:3232719 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3232719 Instructions Using the following options: cableLength = 156 cablesPerGroup = 10…
The holes are 76mm apart using the existing #8-32 screws, where both seem to be somewhat of a standard after checking online hardware stores. There are files for: horizontal handles with the hook on the left or right side, vertical…
On our race car I needed the ability to delete the airbox and airflow meter for a 350Z engine. This fitting adapts from the 80mm piping on the intake to the 3" cone filter we have. It also has a port for a GM Intake Air Temp sensor that…
Adapter is compatible with a 22mm Hex Socket or 22mm Wrench.
version 2 now up larger main spool chamfered bolt. i was sick of the cardboard spools not fitting on the re useable bambu spools or the plastic spools being to small for the ams so i have made an adapter that fixes this issue. threaded…
Check out the stunning 3D design of this home stash jar, crafted with intricate detail
This is phone holder for ikea bunk bed which i made for iphone 13 but if your phone fits you can use it size:13x76mm good printing :)
Straight two-piece 76mm semi-rigid hose fitting Find out more about hose connector: https://www.alveo3d.com/en/product/flexible-air-duct/
This is a simple holder for Post-It Notes (note size 76x76mm; a 50mm high block fits nicely in the holder). Two designs are provided: with/without pen holder Design: Tinkercad. Slicing/printing: Prusaslicer 2.7.4 and Prusa MK4, fw 6.0.2;…
![Spool (Reel) Holder System with adaptors [bearings] for 45mm-76mm ID spools (reels)](https://media.printables.com/media/prints/128653/images/1233290_5cfb1f8e-6e7d-4185-bfed-1f820871c179/blackbronze.jpg)
