Counting matching models…
Viewfinder, Eyecup for camera model Sony A7R IV. Not sure if model will fit other versions of the Sony A7 series. When printing with PLA I used scaling of 101% in Cura.
This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on the Sony ILCE-7RM3 camera. Its probably also fits on any other of their cameras as well though. This model is designed to be printed standing upright…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Hallo! Die ursprüngliche Design Idee stammt von: https://www.thingiverse.com/thing:5180316 Wie man unschwer erkennen kann habe ich aber so gut wie alles geändert und die Halterung für die P7R Core angepasst. Die Maße für den Ladestecker…
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
This is a simple clip for a LED Lenser or similiar torch that can be mounted to a wall with Ø4 Screws. It was initially made for the LED Lenser P7R (diameter of the body = 30mm) No Supports needed I recommend to print with infill >50%
Print at 300 degrees (I was too lazy to pre-rotate it) with supports and brim. Also works as adhesion test for your printer. Update: don't drop it loaded, print cracks between layers.
This is a vertical stand for the MSI GL62M-7RD laptop. This is not intended for use while the laptop is powered on because the exhaust faces down rather than up. While it may be possible to use the laptop in this position, the laptop…
Upgraded to a better gearbox and larger motors on the kids power wheels truck. Made this to use the existing wheels.
I have updated to model. -Shortened the flap (I kept breaking off in my backpack.) Remix Rev. 1 I adjusted the space to be -1mm shorter and modified the rubber foot indent(-0.40mm) <This made the model so much more snug! It is a snugger…
V2 version is grips the bottom plate better. I Recommend: %35 Gyroid infill For 0.4 Nozzle 0.08 XY contour compensetion. 0.2mm Layer Height Fuzzy Skin You can use long shaft 1/4 metal screw or you can print one.
I bought a used VX-7R and the rubber DC charging port cover was in dire need of replacement and I couldn't find any for sale. Like the original, my design relies on the OEM washer and screw to fasten to the radio. Print this gasket in TPU…
ZGA37RG DC Motor tight fit 4mm screws and nuts custom Design. Comment with any problems and I'll do my best to help you fix it.
The title, but smaller. It's a Ruger RXM Mag Sleeve for a 17rd GL-9 Magpul mag OG model by FeedingBirds4Evah
Eignet sich super, um komplette Räume nur mit Taschenlampen auszuleuchten. Gedruckt aus PETG. ABS/ASA funktioniert auch. PLA ist bestimmt möglich, habe ich aber nicht ausprobiert. Material auf den Fotos ist PETG Signalweiß von M4P.…
Print this vertically like the orientation in my wall-mounted photos. This will ensure optimum strength. If you print it with the flat side down - it will be much more prone to breaking. A holder for Maglite D-Cells that is strong enough…
I wanted to make a honeycomb storage wall for my camera gear so I designed this. I printed with PETG at 0.2 with 35% infill and 4 top layers. Check my other designs for my HSW camera wall!…
Tripod Mount for Ledlenser P7R with a ArcaSwiss compatible platte. Very helpful for taking pictures where more light is needed, for example Macroshots from mushrooms in the woods. It is my first model, if you have ideas to improve it,…
Just a small and portable diffusor for Led Lenser P7R Just printed another one and got some pretty bad overhangs with 0.3 resolution. with 0.15 everything was fine. So maybe play with the resolution if you are not happy with the result.
A diffuser for LEDLENSER P7, P7.2 and P7R the P7R has its own file as it is slightly thicker than the two others There are four files included, two attachments and two docks The two attachments has a tight fit and doesn't falls off, while…
I needed a way to not lose track of my Sony camera's batteries … an eternal struggle. I have two Skadis boards mounted on. my printer shelves so that's the answer. Mocked this up in Fusion 360, may do a few more tweaks eventually to make…
1.this is a grip designed for sony a7r3 which provides a nice holding feeling especially for big hand users. 2.you can fit it on your camera without any screws and glues 3.sd card and battery will not be affected
Hi, you can use this case for your KBD67rev2 mechanical keyboard PCB. I recommend transparent filament beacause of the LEDs on the bottom of the PCB. The holes are fitting for M2,5 screws.
Little Holder for my P7R on my Nerf Blaster Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 100% Category: Other
This is a handle that we designed to use at CES for verticle video content! You will need an M4 threaded insert, a soldiering iron to insert it, and two ¼-20 machine screws. We would not recommend printing this in PLA, only ABS or PETG.…
I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…
this mag coupler is not for use with a TIPX marker. but it will work with the tipx mag adapters. and will not work with the pouch that is designed by me. or you could but only use the 2 on the our side and use a normal on in the middel.…
The headlight on my Brompton is not bright enough if I drive in the dark on non-illuminated bike paths. So I created this adjustable mount for my flashlight, which has a diameter of 27 mm. I wanted the beam of the light to be adjustable…
As there is no chargin cradle available to charge the battery of an LEDLENSER H7R.2, iH7R or CRI battery, I built my own. This one can be handled with every li-ion chager. edit 04.05.2020: I added a "storage box" to prevent leakage…
Tray for reloading ammo case, for 81x 9mm and 100x 7x57R
1.more comfortable holding feeling than ver1.0 2.longer grip to support your palm 3.better looking
The orange lens mount ring on sony A7 quite annoying for me. made this to cover it
Držák za opasek nebo řemen. 2x 16Ga. broková, 2x 7x57R kulová.
this mag coupler is not for use with a TIPX marker. but it will work with the tipx mag adapters. and will not work with the pouch that is designed by me. or you could but only use the 2 on the our side and use a normal on in the middel.…
block for front hydraulics for RC tractor 1:16 John deere 7r motorized bruder
Kask Superplasma P7R holder Since the manufacturer does not offer a way to mount a headlamp in combination with the visor on the Kask Superplasma, I designed a mount myself. It uses the mounting point for the ear protection adapter and…
The best way how to attach your Hello Kitty keychain on your Echelon.
Thanks @dtphantom and @DavyGD
A LED Lenser P7.2 + i7R (and similar) spare battery housing for transport. Category: Parts
7x57r caseing and bullet can be turned on/off in .stp
Steering block for RC tractor 1:16 John deere 7r motorized bruder
The oroginal clip for closing the battery case on my Led Lenser SEO7R broke. The new clamp keeps the battery case closed
Charging cradle with cable storage space for LedLenser P7R (with magnetic charging adapter) Wrap the USB-cable around the three stands to shorten the cable until it's connected to a USB-power-Adapter. → countersunk screws (3 pieces)…
Upgraded from A7IV to A7RV and I dislike the mode change button that has a pin and needs to be pressed in order to change the PSAM modes. The button is already moving quite hard so there's no need to press the pin in the middle. Designed…
This shell is for V7RCDOM board only.
Base plate for CZ75 compact/ P-01. fills the gap when using full size 17rd Mec-Gar mags. There are 2 files, one for round tab floor plates and the other for square tab floor plates. Works best printed at 45 degree angle as shown in photo.
This is a simple foot for the amazing iFlight TuboBee 77R. You will need to replace the motors bolts with a few larger ones. Print it on TPU with a low speed to be perfect. Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr…
The standard machine for sanding floors along the baseboard is the Clarke Super-7R Edger. This 3D model is an adapter that makes it easy to attach a shop vac. The adapter inserts into the edger port and then the rubber end of the shop vac…
I printed it in PETG and added it with some double sided tape - i used some nano tape (not sure if this is the proper name for it) as I have used this a lot before and it is strong and does not leave any residue Warning: I do not use the…
For best result enable supports and orient the hook as shown on the print bed. I designed this for my coleman 17b so that kids can hang some of their stuff once we are set up.
This is a simple stand for your LED Lenser P7R. The stand can be mounted to a IKEA SKADIS Wall.
A real simple wall mount for the Air conditioner remote control in my Coleman 17B/17R. Just use some double sided tape to mount it to the wall. If someone requests one with screw holes I will upload another model. I print all of my RV…
I made this clip to add light to the Dreame Z30, to illuminate all the hidden spots. It is designed for 36.4mm tubes and 27mm diameter ports. I adapted it and it works well for me. Printed in PETG, more elastic.
Stackable holder for 1 Audio Technica Pro37 or Pro37R. Walls are super thick for durability for my usecase.
Gridfinity Patona Charger Sony NP-FZ100 Sony A7IV A7III A7RV A9III Mirrorless Cameras I added small gap to eliminate Hull line when printing.
Snap on nic, friction fit fan. Single slot cooling for when you don't good airflow over your 10gbe nic. Designed for the LeKuo PR27R11 NIC. WN7515-12PWM is a bit too big for half-height sff cases, unfortunately. Made with 100% ignorance…
The orange lens mount ring on sony A7 quite annoying for me. made this to cover it
I printed it in PETG and added it with some double sided tape - i used some nano tape (not sure if this is the proper name for it) as I have used this a lot before and it is strong and does not leave any residue Warning: I do not use the…
This is a simple stand for your LED Lenser P7R. The stand can be mounted to a IKEA SKADIS Wall.
This is a shelf insert for AR-15 mags for the popular Otso 5-7R Pro gun safe. Holds 9x standard 30rnd AR-15 mags, including STANAG and Magpul PMAGs. These cheap Otso gun safes are fairly popular here in Finland, so hopefully other people…
I made this because the default mount on the airsoft gun has a notch that gets in the way of some attachments For the Red Star Full Metal 47RIS Airsoft AEG by Echo1 USA or similar
Upgraded from A7IV to A7RV and I dislike the mode change button that has a pin and needs to be pressed in order to change the PSAM modes. The button is already moving quite hard so there's no need to press the pin in the middle. Designed…
I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…
I couldn't find a cover model for the Renishaw TS27R probe anywhere, so I designed one. I think it will be useful for many people who use this probe. The print orientation is shown in the photo. It doesn't require supports, just a small…
I created this because the original's hole spacing wasn't wide enough for the UV-17R Plus. I also re-centered the holes to be more aesthetically pleasing to the eye. V2 adds recesses for the screw head so it reaches the threads in the…
This is a shelf insert for AR-15 mags for the popular Otso 5-7R Pro gun safe. Holds 9x standard 30rnd AR-15 mags, including STANAG and Magpul PMAGs. These cheap Otso gun safes are fairly popular here in Finland, so hopefully other people…
I made this because the default mount on the airsoft gun has a notch that gets in the way of some attachments For the Red Star Full Metal 47RIS Airsoft AEG by Echo1 USA or similar
