P7, P7.2, P7R work lamp led lenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A diffuser for LEDLENSER P7, P7.2 and P7R.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 70
- Makes
- 1
- Views
- 737
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A diffuser for LEDLENSER P7, P7.2 and P7R
the P7R has its own file as it is slightly thicker than the two others
There are four files included, two attachments and two docks
The two attachments has a tight fit and doesn't falls off, while the docks are loose, so you just dock the flashlight without lifting the cone.
I have designed it with a small cone at the bottom as a kind of diffuser to spread the light better.
Print Settings
Supports:
No
Infill:
Infill: 100% (the cone is hollow, and if the infill is less than 100%, it will look weird when the light shines through)
Notes:
No adhesion required. Print with transparent plastic for optimal light. I printed it in PLA.
Layer height: 0.3mm
wall/top/bottom thickness: 1.2mm