Counting matching models…
A storage case for the TS80P soldering iron by Miniware. The case has space for the TS80P soldering iron and five interchangeable tips, as well as a couple storage areas for a USB-C cable, tube of solder wire, or whatever else you can…
Print approx. €9.07–€11.08 excl. taxPreliminary estimate for PETGSource material: PET
The cover slides easily on and off the lens. The scad file is configurable in terms of spacing. I also added my own kind of elephant foot compensation because it often affects more than one layer and it really hinders the sliding…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I needed a protective case for my TS80P soldering iron. There are many variants available already, but I was looking for a compact case for the TS80P with one tip only. I couldn't find one which fitted my needs, so I came up with this.…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET
I got a new soldering iron the TS80P and decided to make up a quick case thats sturdy and tough and keeps the iron tight in the case to protect against being tossed in a bag. The case accommodates (one) TS80P Soldering Iron, The one I am…
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
I've printed it with pegs down, and pegs up — they both work great, but I'd recommend pegs down so that the visible surface when mounted is ‘pretty’ without the bridging visible.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Print with the usb-c cut out at the bottom/print plate.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Glue required. Also some magnets to better hold cover, but not 100% needed.
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Print: For a multi-color print (as in the example photo), three layers are needed for the “Cover”. The heights of the layers are: 1mm, 2mm, and 1mm. Assembly: The slit for inserting the cover into the main part is exactly as wide as the…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…
Modified MailBox's Alientek rugged case inserts to include a space for flux on the top and the USB cable on the bottom. Space for three soldering tips, which seem to snap in place quite well. I have included all of the models I used to…
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
Another soldering iron and tips for it
The TS80p is the soldering iron with the best price-performance ratio. Although it is just USB-C powered with a max power consumption of. 30W, it outperforms much higher powered irons. This is achieved by a clever design where the heat is…
Eufy Camera wall Bracket for Indoor Cam Pan & Tilt 2k and 1080p Simple bracket to attach your Pan and Tilt camera to a wall. Bracket works by fixing the mounting plate that comes with the eufy camera to the bracket using the two m3 6mm…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
Those 3x1 Gridfinity Boxes will either hold your TS80 or TS80p Soldering Iron and a Tip or just two extra Tips. Note that I redesigned the base of the Boxes to save some material. You should be able to print that without Support even if…
作者QQ/微信：928737095 欢迎加入QQ交流群：107327759 官方店成品： 正点T80烙铁盒-淘宝网 正点原子T80/T80P便携烙铁盒，同时支持两款型号，支持放置烙铁本体，两个烙铁芯，一卷焊锡，清洗棉。支持烙铁架功能。 烙铁支架的金属圈采用内径12，外径20，厚度8的固定圈，螺丝孔洞M5（不在此做店铺推荐，选择淘宝9毛左右包邮的购买即可） 使用M5 * 8 头颈7mm的螺丝固定金属圈： 304不锈钢十字小沉头螺丝钉-天猫…
This minimal mounting for the Inno-Maker 1080P camera is excellent and gives a great view to monitor your printer, I designed it for my Voron but it will work on any 3d printer really, as long as you have a Raspberry Pi with a free USB…
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
This is a remix of 3Drony v2.1 . The main difference is that this model is designed to fit: a Runcam split 3 lite , although it should also fit a Runcam split 3 Nano Whoop . a TBS Unify pro32 nano optinal: a Lumenier AXII 2 u.fl RHCP…
Holder uses 608 bearing, M3 Square Nut and Bolt.
A 5x1 Gridfinity Box that fits an Alientek T80/T80P soldering iron and and up to four additional tips. (first model i made, any feedback is welcome)
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
If you are a fan of heat inserts you can find many use for them ;) Like I did for this excellent “rugged” version of a case for my TS80p. If you don't like the heatinserts, please find the original here:…
This model works with many cheap 1080p webcams that use a 55x19.5 mm PCB with three mounting holes. This gives a significant increase in resolution, and for many cameras brightness as well. Additionally some cameras have an adjustable…
A case and and soldering station for the Miniware TS80p soldering iron. The case snugly fits the soldering iron handle along with three tips. The soldering station accommodates a spool of solder, brass wool tip cleaner, USB-C power cord…
This case is inspired by this Thingiverse Model . The case was a bit to small for me and had some minor issues. So I modelled my own :) The icon for the Soldering Iron was made by Bakunetsu Kaito and can be found here . — Parts For…
This is a Rain/Weather cover for the 1080p and the 2K Eufy doorbell versions. There are hybrid version to allow either model to be fitter as the 1080p and the 2K doorbells are different sizes.
A "small" remix of Kitlaan's Soldering case. Slightly modified for European power supply and more tips :-). It is use for: The TS80P soldering iron + tip 3 additional tips European power supply USB-C cable Grounding cable Hex L key Like…
Housing for Miniware TS80P soldering iron. The housing can be printed with the filler separately, both in the version for flexible materials, where there are smaller tolerances so that the soldering iron does not fall out and holds well…
Holder for a TS80P soldering iron and 4 tips. Remixed from: https://www.thingiverse.com/thing:4631801/files
I've created my personal version of a Rugged Box with Multipart Pinecil/TS100/TS101/TS80 Case. Check the links for the original design. Latches and hinges need M3x16mm screws Print, seal in flex material. For the stand, you'll need a 608…
Update 04.07.2026: - added a version of the insert that can hold 2 reels and an accompanying lid for the smaller compartment - slightly tightened tolerance for the stand-slot This is a better and improved storage box built on the…
This is mount Adapter for Xiaomi Mi Home Security Camera Basic 1080p How to install: Skechup file is included - feel free to remix and share ;)
Designed for Elegoo Neptune 3 Pro, but can fit other models with the same 2040 V-profile. Print orientation: Base - on side making fins which lock into V-profile to be vertical Top - lying flat Supports: Yes Works perfect together with my…
Soldering iron stand for the TS80P soldering iron. The iron can be dropped in and retained, even with a heavy cable pulling it down it remains seated and will tip the entire stand before removing the iron. ( Although once tipped the iron…
Simple stand for attaching to wall. Cable guide for each side, depending on how you use it. Has three 4mm holes for screws.
This is an enclosure for the Arducam 1080p Day/Night USB camera . I needed to make a baby monitor for someone and had a raspi zero 2 and arducam to get started . Here’s an enclosure that uses (4) 16mm M2 screws and heat inserts. My board…
Retoque el modelo porque la cámara tenía mucho movimiento una vez puesta y le faltaba más ventilación para que no se cal
Modified the stand to hold a smaller (16mm outer diameter) bearing. Reason being this was the bearing I pulled out of a giveaway fidget spinner I found lying around. This does have a smaller hole so the tip will be in the bearing instead…
I have my A/B motor cables in the underside of the 2020 extrusion so i needed and alternative extrusion side to mount the camera to. This mount allows the cam to be positioned under the gantry but mounted to the front facing side of the…
I made this support for my Aukey 1080p webcam, to monitor the printer via octoprint. If you download or collect any of my designs, please like me!
Remixed jcobgad's original design to fit a TS80P iron Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: Real PLA Black Post-Printing ============= Category: Electronics
Designed for 3030 extrusion printer frame but works with any profile that can take M3 hardware. Hardware required: M3 heat set insert M3 x 6 to 10mm flat head M3 x 12mm socket head for 3030 M3 T-nut for 3030 Print without supports. Heat…
A mount for Yi Camera (1080p) for Ender 3 V3 SE and KE. The mount can be reversed and be placed on either left or right side of the sensor. Use longer M5 screws than the original ones. Preferably 16mm if you're planning on leaving the…
GUITION JC4880P443C-I-W Desktop Stand This stand is for the version without a backplate. The screen is loosely friction fit, you could use the pre-installed adhesive if you wanted to but would make removal of the screen for debugging a…
camera mount for printer enclosure needs 3x M3 bolts
Simple organizer for holdering TS80P soldering pen with its adapter, cable and up to 4 tips. Features Everything holds tight enough even when organiser is flipped. This is useful when organizer is used as infill for some kind of…
Printed with Prusament PETG Jet Black 0.3mm no rafts or supports required.
Privacy Cover for Spedal 1080p WebCam
Snap fit enclosure for this camera: https://www.arducam.com/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds.html Print Settings 0.2mm PETG, 15% infill (default quality profile in…
Miniware TS-80P came in a paper box that get destroy/damage easily when you take out the soldering iron the first time. I made this case so that I can store the Iron and the mini iron stand that came with it. Eight 5 x 1.5mm magnets are…
Just a smaller version of the nice TS80P case by Pieterv24 and jcobgad. Small iron likes a small box. It uses 5x2mm magnets to hold the lid closed. I also added the step files, so you can go crazy. All kudoos should goto the original…
A remix of a mount for the ts80s soldering iron
3-axis gimbal for GoPro cameras, meant to be attached on standard mounts of Tarot 680Pro hexacopter. However it should fit to many other multicopters. I use it with STorM32 BGC gimbal controller and Quanum 2208 stepper motors. Even if…
This remix adds a few small QoL improvements and introduces a second piece to the design to cover and protect the PCB of the webcam. As noted on the original model page, this is intended for a Voron Trident printer. It should work for…
Fits to the left side gantry, ideally with a couple of magnets. Use short M3 screws to secure camera and adjust the angle. Remixed to fit the UVC camera module pictured. It supports hardware MJPG encoding.
Camera Mount for Voron 2/Trident or 2020 Profile. Step & F3D file included
The mount and housing are printed separately and then glued together. I attached it to the printer frame with double-sided tape. The power supply needs to be 5 volts. You can power it from the screen, but I used the printer's power…
Stores my soldering irons, tips, and accessories. Two versions available, for 1 iron and 4 tips or 2 irons and 6 tips. Might make an alternate version that is more self contained for portability. 65mm x ~120mm x 43mm with 2.5mm wall…
An adjustable mount for a de-shelled Creative Live! Cam Sync 1080p V2 that fits on a 2020 extrusion. Model was designed for a V2.4 to be placed inside the printer. Limit the max z height to 260 when printing high prints that cover the…
This stand can be attached to the widely used Copper Wire Cleaning Box("ball" diameter is 70mm) with two magnets(8mm diameter, 3mm height). It can be moved around(from horizontal to 45degrees in any direction) but it still keeps in…
Printer brand: Creality Printer Model: Ender-3 Filament used: Comgrow PLA Rafts: No Supports: Yes Resolution: .15 - .20 Infill: I printed at 100% for stability (probably overkill) Notes: I printed this using Creality Print. I added…
Remixed from the 1080p usb webcam upgrade made by @RobertSamples_345778 . Changed the magnet holes at the rear to 6x2mm. **Original camera was no longer available, i purchased this webcam on Amazon and it fit perfectly**…
Did not include the seal or the soldering iron model. The fit is spot on (in my opinion), on the firmer side, can be adjusted by heating the inserts. I printed it in PLA+, and I am pleased with it :) Hope it helps you. Cheers! :)
This is a remix of @ScottW's MK4 camera mount arm. This model is made to fit the OtooKing 1080p webcam , which is both cheaper than the Logitech C270 and also readily available in Canada. Printing and assembly instructions remain the same…
I was looking to make a soldering station for my new TS80P Iron. I found awl13A's holder and it does an extremely good job of holding the iron so I modified its base to fit my station. The holder swivels and has a hole for a 3mm locking…
Mi home security camera 1080p (magnetic mount) came without a classic screw stand to mount it, so I created one. Composed by 2 side, you need of 3 M3 screws with nuts. I added some piece of rubber tape inside the stand to keep it in place.
If you're willing to strip the plastic housing off of your NexiGo N980P, you can use this model to mount the PCB in either the front left or right top corner of your printer (or, the back is probably ok too). Use two of the zip ties from…
Original mount has very limited angle, this mount adapter solves this problem.
Description This case was designed from scratch for the GUITION JC4880P433 development board (ESP32-P4 with an ESP32-C6 and a 4.3" touch display). I wanted a minimalist design that holds the screen at a 60° angle (you can also rotate it…
I designed this GPS support for the Falconrad 7 inch drone to accommodate the HGLRC M80 Pro GPS and three SMA connectors for video and RC link with bardpole. I used tpu eryone with bambu p1s printer 30% infill Normal support
DC/DC Buck converter, voltage step down enclosure (case) suitable for CR-D4080P
You can mount the YI1080P indoor camera outdoors, on the wall, on the ceiling, in an area protected from water
3D Model of the Arducam Day-Night Vision Camera (Fisheye) OV5647 5MP linked below. LINK: https://a.co/d/fcFQiCM
Please like and download this model, It helps me justify the time expense. Sneaks compatible case for Arducam 1080P Low Light Low Distortion USB Camera Module with an M12 lens. AKA the UC-B18 SKU B0468 (2MP IMX323) Amazon ASIN B0CGLW3Z1N…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
I love my TS80P soldering iron and my IKEA SKADI pegboard! This print holds a TS80P, two spare tips and a Solder Pig. If you enjoy the things I produce, buy me a coffee . Print settings 0.2 mm layer height 15% infill 4 walls no supports…
I needed a place to mount the camera in a Voron Switchwire. I originally used a combination of the housing from the 2020 mount for the Aukey Webcam and another piece from a user on discord (shout out to MINUS Stl on the Fizzy's Tech…
A cup to hold the Amcrest 1080p (ASH21) camera with adjustable pitch. A solution for aiming the camera down (over a ledge) without the need to mount it on a veritcal surface. Legs can be assembled with feet inward or outward – depending…
This is accessory mount for https://www.thingiverse.com/thing:3064253 Mounts for: GPS M80Pro (26mm x 25mm x 8mm) Added lower 6mm version mounting on: TBS Source One v3 Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No…
Storage box for the TS80P soldering iron with 3 or 4 tips, cable and power suply. As improvements, this can be printed separated and assembled with an M3 screw as hinge.
Just updated name to TS80P as the original says TS80 which triggers my OCD ;). All credits to the original poster.
This is a modification of 6d6178 's “ Arducam B0205 1080P Day & Night Vision USB Camera Case ”. I've made the screw recess on the front deeper to accommodate a shorter screw, and increased the size of the opening to accommodate larger…
Added a different charger and removed the grounding cable, so there could be a small apartment instead.
je trouvais le design intéressent de l'AngryCam de chri.kai.in ( Voron Mods - Angry CAM USB by chri.kai.in (vorondesign.com) ), mais je ne trouvé pas la caméra utilisé de bonne qualité. J'utilisais une webcam récupérée sur un ancien ordi,…
Since none of the Omnifixo cases on printables seems to fit the TS80P soldering iron, I designed one. It would probably also work for the Pinecil, TS80, or TS100 soldering irons, but I haven't tested it. Otherwise it also holds the power…
Webcam ball (7mm) socket mount with female 1/4 20 UNC stud for tripods. Print Settings Printer: Monoprice Select Mini v2 Rafts: Yes Supports: No Resolution: .13125 Infill: 100 Notes: Due to size I recommend printing on a raft. How I…
Needed a case that I can keep in a different place than my work area. It is bulky so will not fit into a backpack, unless it is large. However, does keep everything together. This will hold the USB adapter, flux and wick, solder tubes and…
If you need to clamp an Alientek T80/T80P soldering iron, just use my adapted version of the original holder. I made it slightly larger so it doesn’t scratch the 14 mm iron while still allowing it to be clamped securely with bolts
Combines with the Ender 3 S1 Side Mount Base (https://www.printables.com/model/488991-ender-3-s1-side-mount-base) to hold the ZIQIAN 1080P Webcam at bed level for timelapse videos.
I make a holder for Mi Home Securite Camera 360° 1080P. I use Mi home camera support lock from this https://www.printables.com/cs/model/265039-mi-home-camera-360-support-xiaomi/files and this Nuts for M3 screws…
This is a 1515 mount mod for the Webcam Case for a cheap AUKEY 1080p Webcam.
A custom case for the TS80 soldering iron and two tips.
tpu holder for Readytosky Johnny fpv drone frame mounts on the back of the drone as usual.
