Counting matching models…
I consider this a WIP due to how variable my experience with the inkjet print process has been . Please comment with feedback from your experience with the process. Model Info This is designed around standard NFC PVC Cards (54mmx85.5mm).…
Important: This fits the Wera 818/4/1. Wera makes several models that look similar but have slightly different geometry. Please check the model of your screwdriver before you print. The fit should be snug, but not too tight. Slightly more…
This is a protection frame for the Yaesu FT817/818/ND series of radios, with places for rubber feet and holders for an antenna tuner. Usefull during portable/qrp work. Works with 10mm M2.5 screws and washers.
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and…
Motivation After 2 years the right pedal of my bike was totally broken, so decide to model a replacement to reuse the origial thread. To make me sure than the pedal is strong, I added two holes to pass a stud screws and reinfoce it. But I…
Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…
Protège l'intérieur de la base de la poussière lorsqu'il n'y pas de volant d'installé.
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : Infill : 15% 4 perimeter layers No support needed, except for the smartphone stand, stand part Materials…
Dieser Aufsatz für den Tuningknopf des Yaesu FT-817/18 ermöglicht ein rasches Drehen desselben mittels klappbarer Kurbel und optionaler, aufgeklebter Fingermulde. Als Achse für die Klappkurbel ist ein Stück Filament (1,75mm) vorgesehen.
ESP32 Seven Segment Single Print Digital Clock - Modular and Monolithic LED Display Designs - Ws2818b LED Strip 100LED/m - Wemos D1 Mini - (ESPHome/Home Assistant) ESP Digital Clock Collection A collection of modern, customizable LED…
Die winzige Fingermulde im Originaltuningknopf ist auch für kleine Finger ungeeignet. Dieser aufsetzbare Kurbelstift hält ohne weitere Vorkehrungen bereits mit leichtem Druck selbstständig auf dem Originaltuningknopf und kann auch…
No Supports Required Print Time: Approx 10 Min Printer Used: Ender 3 v2 with a 0.6 mm Nozzle Printer Settings 0.3 mm Layer Hight 2 Walls Speed 80 mm/s
Es gibt schon etliche Konstruktionen, um ein FT-817 und ein FT-818 bedienungsfreundlich aufstellen zu können. Nun noch eine mehr. Der Aufstellbügel besteht aus zwei identischen, zusammengeklebten Halbteilen.
Yaesu FT-818 microphone holder for the Portable Zero side rails. Should work on the FT-817 also. Uses two 13mm x 3mm neodymium magnets held in with superglue. Print magnet side down. I have included integrated supports so no additional…
I made gorenje door shelf simple slide, probably can be used for different fridge types too. Its top shelf and fully size printed diagonal. Model Clean without text. Size 460 x 50 x 108mm Model printed with layer 0.24 Wall thickness used…
This is a dust cover for Thrustmaster Quick Release used when the steering is removed. It prevents issues such as poor contact caused by dust. I often remove the steering wheel when I'm not playing sims because it gets in the way by…
I wanted to hang my mac mini off the back of my monitor, but while some Dell montiors expose a VESA mount, on the 3818 it's used by the monitor stand. So I designed up this adapter to hang on the top of the stand, so I could then…
This 3D model is a custom adapter for the Thrustmaster T818 direct drive wheel , designed to securely mount it onto racing cockpits equipped with a compatible plate or support. The adapter features: Mounting hole spacing of 15 × 170 mm ,…
This is a remix of Maker222b's "FT817/818/ND protection frame" on Thingiverse. I rounded and chamfered edges and corners, added an extra 50mm to the back to create room for cables, and added holes for threaded inserts. The intent is to…
I used fholgado's as inspiration to create this mount for a MagicShine MJ-818 rear bike light. It fits in the very shallow indentation on the back of the light and has a cutout for the cable. Category: Sport & Outdoors If you like this…
Created but untested as I do not have this radio. This was designed to allow the batt connectors to come straight up for POTA/SOTA work. If you print and it works please let me know!
The original model did not fit my radio right. Instead of the bottom of the model being paralell with the bottom of the radio, it was angled down and was sticking down below the radio. I guess that could be because Yaesu might have…
I loved the idea of TyCreek's Countertop Razor stand https://www.thingiverse.com/thing:2917819 , but since I don't have any real amount of hair, I don't use all the accessories :) So I wanted something simple to allow me to store and…
I was looking for an easy way to mount a camera and light on my Dell U3818DW Ultrawide Display. I first made a model of the upper part of the display stand and used it as a cutout for a simple box with holes for universal camera screws.…
This is a simple protection cap for these great FT817 side rails: https://www.thingiverse.com/thing:4118033 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 2.0 Infill: 35 Category: Other
This is a sound reflector designed to direct the sound from upward-facing speakers to the front. It is designed for the ATS25, but I believe it can also be used with amateur radios such as the FT-818, FT-817, FT-891 and IC-7300.
This bracket helps to hold the leds in Christmas decorations such as arches and canes
Beifahrersitz Halterung (Teilenummer 281881357) für VW LT.
Accessory holders for Geardwn FT-817/818 protective rails. https://www.thingiverse.com/thing:5248147 Mount takes a ¼"-20 insert that you can heatset in, depending on your filament/print you may need to add some superglue to hold it…
The existing models I found didn't quite fit my device, so I designed this one. It might also be compatible with other similar hair trimmers.
Servo Horn replacement for Haiboxing 18859E Not perfect but it fits on the existing servo saver assembly that comes with the car. Short print time, Replacement Part :…
Introduction Remix inspired by a fellow ham doing lots of POTA with the FT‑817. Rails are reworked in FreeCAD to attach the original arm strap. Printing Basics PLA works for light duty; for real use prefer PETG, ABS/ASA, or Nylon Print…
This is a replacement for the McCulloch MAC 2818 carburetor air box. It should also fit the Eager Beaver 287 since it’s the same trimmer model. The fuel pump bulb was a tight fit, but is secure once in. Just squeeze in the tabs on the…
Simple wall mount holder for Blue Spot Tools 08185 3PCE 280MM (11") Long Reach Plier Set - from Amazon
Fits the three most common sizes in light aircraft. Pushes on the end of the nut when the hose, cap, or line is disconnected without needing to disassemble hoses or lines. Sized to fit the nominal dimensions in the Milspec, so measure the…
This is a monorail foot to go with the FT817 / FT818 rails that were designed by https://www.thingiverse.com/thing:4118033 I prefer this to having individual feet. This rail nicely clears the mic when folded against the radio body. Use M4…
This is a modified, from scratch design of Road Show pinball machine's locking pin. The collar at the end of the part typically breaks, which either causes the return spring to jam the part or the part just goes too far for the coil to be…
Needing a compact solution for HMI prototyping hardware based on an iBase 818 SBC, SSD, and 15" display connect via LVDS, I created and printed this model. It allows the display to be positioned both in landscape and portrait mode.…
Williamston Vespidae Robotics Team 7818 Logo Coin Willie Logo used by permission of WHS Designed for multi-color - import as one object
Panasonic ER-GB80 Trimmer Holder (45mm diameter) - 1981831
Hardware Required: 2x M3 Screws (I used 12mm length, but 8mm should be enough when you use Heatset inserts) 2x M3 Heatset insert or nut 2x M3 Washer (optional)
4x1 Gridfinity bin holding a Wera Kraftform kompakt 818/4/1 RA-R (also sold as Kraftform kompakt 25 RA-R) and 6 hex bits
Simple mount based on Eoin design for mount on Skadis
Hallo! Werksseitig kann man die LED-Lampe von INVOLIGHT IP PAR 1818 V.2 nicht mit einem Diffuser versehen. Ich bin aber auf die Suche gegangen und habe festgestellt, daß der Diffuser von einer anderen Lampe INFINITY RACCOON P 14/4 genau…
Print notes: Print vertically (threads upright) Enable light supports between threads only Brim recommended 5 walls / perimeters 20–40% infill PETG or ABS recommended
This is a modified, from scratch design of Road Show pinball machine's locking pin. The collar at the end of the part typically breaks, which either causes the return spring to jam the part or the part just goes too far for the coil to be…
Hallo! Werksseitig kann man die LED-Lampe von INVOLIGHT IP PAR 1818 V.2 nicht mit einem Diffuser versehen. Ich bin aber auf die Suche gegangen und habe festgestellt, daß der Diffuser von einer anderen Lampe INFINITY RACCOON P 14/4 genau…
This model is compatible with the lego system.
Replacement mounting brackets for Blomberg dishwasher model DWT-81800SSIH, i have modeled them from scratch and upgraded the design to be more durable. these will work without modifications to the dishwasher. i had success printing them…
The LED stripe is used as the MMU status LED in HH software. Printed using Black ABS The cover is printed using white PETG. There are 2 layers of 0.2mm. Update: the “top led mount.stl” is used to mount the LEDs on top of the Voron gantry.
Print notes: Print vertically (threads upright) Enable light supports between threads only Brim recommended 5 walls / perimeters 20–40% infill PETG or ABS recommended
Charging stand for Wahl Model 9818L trimmer. The charging cable is captured and held on centerline of the trimmer so it can be charged while in the stand. A well calibrated printer profile is recommended so you get the proper fit for the…
Remixed from: QSTARZ 818XT Suction Cup Mount by SilvrEclipse February 10, 2021 (thingiverse). Remixed to fit GoPro Mount Plates. Recreated a GoPro mount from scratch Removed suction pad mounts Fused to the base of the original model.…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
