Wall mount for Thrustmaster T818 Quick Connect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your Direct Drive Thrustmaster wheel to the wall or rig using the T818 connection.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 302
- Makes
- 5
- Views
- 1,397
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and unlock position.
Use PLA+ filament.
Print with 3 perimeter layers and 60% adaptive cubic infill.
Must be strong so don't stray too far from these settings.
The separate logo chip should be printed in whatever color the wall mount is, then color change to white. Use a little CA to set it in the middle. Everything clears and works without a problem.