Counting matching models…
While you can do this with a split and connectors in Prusa slicer the dowels are never exactly in the centre. As well I found 6mm airsoft balls a bit too large. these are 5.8. They work a lot better for the print of the models ( ). To…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
This model is compatible with the lego system.
This model is compatible with the lego system.
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
-tisknuto z PLA -Dewalt TOUGHSYSTEM 2.0, DWST08330-1
This model is compatible with the lego system.
As requested and test printed by u/weeb-splat .
Mercedes Benz C124 Door Panel Clip. Pictures have 3D printed and broken original in comparison. Might not be perfect. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 100% Category:…
VAG clips N90833801 made in the program: Autodesk Inventor Filament material: COPET Resolution: 0.2mm V2 - stronger version( 02.04.2025)
Junction box for Reolink RLC 833A, 1224A.
Philips CM8833 Monitor without ports and cable. Needs some supports.
This model is compatible with the lego system.
Dust port cover for Milwaukee 2833-20 Circular Saw
Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construction from DeWalt, which broke on mine. Therefore this replacement, which is much stronger. You need to remove the old (broken)…
This small adapter was made to make it easier to mount inexpensive AMG8833 Thermal Camera boards from Aliexpress into this case: https://www.thingiverse.com/thing:2799023 These cheap board have a smaller PCB compared to those sold by…
This is an enclosure for a Waveform / Signal Generator built with an Arduino Pro Mini or Nano (ATmega 168 is sufficient) and an AD9833 Programmable Waveform Generator. One 18650 Battery can be fitted inside the case together with charging…
These trim pieces are easy to break when removing the center taillight piece. The original pieces are aluminum with steel mounting studs. They included models are: 75833-14030 - Left side (#2 in the diagram) 75832-14060 - Right side (#2…
Fix your busted cord wrap! Short and long versions available. The picture is of the shorter version. No supports needed. Most materials should work fine. Turns out this part was discontinued. It fits my Ridgid WD16800 Wet/Dry Vac. but is…
Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construction from DeWalt, which broke on mine. Therefore this replacement, which is much stronger. You need to remove the old (broken)…
Simply screw it to the wall and plop the camera on top. There are slits in the mount to optionally secure the power cable to the mount, to avoid the camera being pulled off by the cable. The spacing of the screw holes is identical to the…
Universaladapter für die integrierte Navi-Halterung (VW Teilenummer 150 035 936 A) des VW Up! 1.0 Über https://www.printables.com/de/model/539941-vw-up-10-adapter-fur-handy-halterung-zb-brodit-711 , und Drehfuß des Brodit 711083 auf HAMA…
Speaker Stand for Genelec G Three and 8000/8300 Series with Iso-Pod® Foot Custom-designed stand compatible with Genelec G3 and 8000/8300-series monitors using the Iso-Pod® foot system. Features a countersunk screw hole at the front for…
Case for original f.u.n.k.e. ATR833 Sub-D connector (SSATR2) to add BLE serial for Skydemon. It is designed in a way to sit under the original connector at the back of the radio and not physically block anything else (as it's virtually…
Sprinkler disc retainer Tested on: Gardena 18330-34 Works most likely on: Gardena 18330-20 Gardena 18330-31 Gardena 18330-32 Gardena 18330-33 etc Mine is assembled without an O-ring, but if you need one, I've added a file that can work if…
Battery cover for you tv remote control
1/2in Hex Bore 10mm Major Thickness 15mm Center Thickness 121mm Diameter
Custom HMT-1 4G Modem Mount, created using the Original Mount as a reference.
Update 7/2/2025: The device firmware is complete with a v1.0 release, creating the user experience of ever-appearing CW stations as you turn the tuning knob. https://github.com/jhogsett/FluxTune/releases/tag/v1.0.0 Update 6/27/2025: There…
Extended XT60 PSU Cover with some more space for wiring and vents added for cooling to match PSU vents (S-600-24). Added option for click in switched/fused AC socket (or can cut out angled corner in slicer or with side cutters to go with…
This model allows for the mounting of the Bticino 346833 module on a DIN rail, available in both "horizontal" and "vertical" orientations. The 3D-printable design can be easily printed in PLA without issues. The vertical version requires…
Our Whirlpool front load washer had a drum baffle (Whirlpool Part Number WPW10283356) fall off during the course of normal laundry. This model is not an identical replacement, but has worked rather well as a replacement in our washer. I…
Yes, mini drone motors and DRV8833 motor driver could be superglued together without any help. But that would be always slightly different robot bases. The 3Dprinted part gives motors and motor driver a defined position to superglue to.…
piece 48336 (1x2 plate with a side bar handle) about 2 grams
Case for a Thermal camera module. I designed it to be battery operated with an integrated type-c charger. Front and back panel (Sensorside.svg and Displayside.svg) are laser cut out of 3 mm acrylic. The red part of the svg image is…
Cover for the WIMO fiberglass pole 18338.10 with holes in 2 different versions. Deckel für den WIMO Fiberglas-Mast 18338.10 mit Bohrungen in 2 verschiedenen Varianten.
I needed a reference model for a project I was working on. Sharing it here for anyone else that might need it. NOTE : This is not an official Adafruit model. Positions and sizes of the components are not precise. It should be a good…
Voici 3 pièces de rechange pour le JR Forza 450 Here are 3 spare parts for JR Forza 450 Category: Hobby
I wanted to combine various parts I had into a useful device for creating sound effects. This uses two Arduino Nanos, three AD9883 signal generators, three rotary encodes, a 20x4 LCD display, and various other components to produce sounds…
If This Bot Sees You Search 5383377511 On Google It Will Get Mad
I discovered that BMW uses plugs from this supplier: https://www.te.com/en/product-1-967167-6.html Which very conveniently offers .STEP files with the exact dimensions of the plug. However, BMW have very sneakily mirrored on which side…
Print 0.4 mm nozzle TPU 82A. (slow print - better quality).
Adaptor to use 4x6 labels (110mm) on M833 Fits Phomemo Thermal Printer A4 - M833 Bluetooth Portable Printer, might fit similar printers
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
I recently received my copy of 1833NE: Railroading in New England , so of course I designed storage trays for it. The trays fit in the game box without removing the insert (though I tuck the money under the insert since I use poker chips…
This is a compact storage box designed specifically for the HP PN M83354-002, featuring a sliding lid. It protects the pen during transport and keeps it neatly stored on a desk or in a bag. The model is easy to print, requires no…
Mount for https://www.sparkfun.com/sparkfun-grid-eye-infrared-array-breakout-amg8833-qwiic.html. See https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/grideye.FCStd for the original model
This is a cap for the T-piece for spray nozzles from Gardena
bmw pedal tool removal 83302409646 Push the fork directly to pedal ball, not like original tool, where you use it like lever. Should feel springy, then push more and pull pedal.
Deutsch Mennekes 10833 – Ersatz-Halteband (Kupplung) Da das originale Halteband der Mennekes 10833 Kupplung leider nicht einzeln als Ersatzteil erhältlich ist und ein abgerissener Deckel schnell zu verschmutzten Kontakten führt, habe ich…
Mount for https://www.sparkfun.com/sparkfun-grid-eye-infrared-array-breakout-amg8833-qwiic.html. See https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/grideye.FCStd for the original model
I discovered that BMW uses plugs from this supplier: https://www.te.com/en/product-1-967167-6.html Which very conveniently offers .STEP files with the exact dimensions of the plug. However, BMW have very sneakily mirrored on which side…
This is a cap for the T-piece for spray nozzles from Gardena
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Hose stop for Nederman compressed air hose reel (part no. 833-30372433) If you’re unable to print it yourself, you can…
Sprinkler disc retainer Tested on: Gardena 18330-34 Works most likely on: Gardena 18330-20 Gardena 18330-31 Gardena 18330-32 Gardena 18330-33 etc Mine is assembled without an O-ring, but if you need one, I've added a file that can work if…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Hose stop for Nederman compressed air hose reel (part no. 833-30372433) If you’re unable to print it yourself, you can…
https://www.patreon.com/posts/36099001
This is a 6 compartment divider for the Packout Organizer Cup (48-22-8336). Included with this is the STL file for 3D printing in the original configuration. Also has a .f3d file for Fusion 360 if you want to edit and change how the…
