Counting matching models…
A beautiful round, ribbed flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 101mm wide. The photo shows the vase printed in vase mode. It can be printed in vase mode or printed in normal mode with 0 top…
This model is compatible with the lego system.
For those looking to eliminate noise from the SC846 chassis, this model replaces the entire OEM fan wall assembly with an alternative design that uses quieter hot swappable 120mm fans.
SC846 ATX PSU Mount For those of us who have removed the rackmount PSU that comes with the Supermicro SC846 chassis and replaced it with an standard ATX PSU for quieter operation, the ATX PSU is usually left to just rest inside the case.…
Printables upload of JRO's design for front fan bezel for the 846/847 series of chassis from supermicro. This allows 3x 140mm fans to be used on the front of a supermicro 846/847 series chassis. Note that this is a BIG print, 462mm. For…
HDD Blank for covering empty bays for SC846 chassis for improving airflow across populated HDDs.
SCH846 Rear Fan Bracket & Caddy Low-profile fan bracket to hold the fan caddy for Supermicro SC846 chassis. These low-profile brackets provide clearance to use the complete ATX PSU Mount along with the accompanying shroud for closing off…
In my Supermicro SC846, I have the BPN-SAS2-846EL1 backplane with SAS expanders. This means that all the drives in the 24 bay must be connected through my HBA. If you're running a hypervisor, such as Proxmox, you may want your hypervisor…
Trays for organizing 30 Minute Sisters parts inside a J-9846 container box from 100yen shop. Fits: compartment 1: an assembled figure compartment 2: 15 pairs of hands or shoulders, 2 pairs of thighs, circular spacers, neck pieces ear…
This design fits a standard 80mm computer fan into the middle chassis fan slots in a SuperMicro CSE-846. I designed this so I could replace the case's loud factory fans (part number FAN-0127L4). Note that the fan can be oriented either…
This is an adapter to allow for mounting 80mm 25mm thick fans on the rear of a super micro 846 4u case. I lost my pieces so I designed this to let me mount standard fans.
@Patix made an awesome dirt bike. It needed a rider. Was printed at .2mm with PETG. Will need support where appropriate.
Nachdem der Marder mir dieses Teil zerstört hat, habe ich es aus TPU nachgedruckt, hält seit dem und macht was es soll.
loose ground coffee cover for philips coffee machines For models 1200/2200/3200 For me only like a case. I don't use the hatch opening printed on creality ender 3 v2 neo printer material petg filling 20%
This model is compatible with the lego system.
This is a storage solution for the GMT edition of the 18xx board game 1846. The box holds 2 trays, one for the yellow tiles and one for the green tiles (use the yellow_tray design for both). The brown and grey tiles fit in the bottom of…
SCH846 Rear Fan Bracket Low-profile fan bracket to hold the fan caddy for Supermicro SC846 chassis. Added a tab so the caddy can latch into place. This gives clearance for the ATX PSU Mount when used without the accompanying shroud. If…
After using my original design for several months, I decided to refactor my designs and add some features to improve the usability of the boxes: Rounded boxes -- All of the boxes now use rounded corners and edges that make them more…
Cookie stamp Pi 3,14159265358979323846
This adapter replaces the factory fan mounts and is screwed in from the back with 3 screws. It allows you to mount 92mm fans in the rear, hopefully to lower the sound level of the case. Print with supports. More walls will make it more…
A bracket for mounting a 360 AIO into a 24-disk bay Supermicro 846 case. Requires several other models to work. This model will not fit with the stock hot-swap power supply setup. Requires ATX Power Supply Mount –…
This model is compatible with the lego system.
Volvo Penta Fitting 23238467 3883597 + key Material: ABS Infill density 100 %
You need to print one lid and 3 of the tile trays Category: Toys & Games
Adapter from the dual redundant psu that come with the case for an ATX PSU. The cutouts in the bottom are for the defau
These are printables models for the PDU cover on super micro 24-bay server units. PN sc846 and the variance of the 4U capacity. The slats are angled to eliminate the need for supports. Fit is pretty decent, but not perfect. There are 2…
Print with TPU and use double sided adhesive tape to mount the feet.
I designed this wall mount specifically for the LEGO Racers 8461 Williams F1 Team Racer (2002) . The mount holds the model securely while remaining almost invisible from the front, making it ideal for displaying this classic 1:8 scale…
While refurbishing an older Whirlpool washing machine, I noticed the end caps were cracking in a couple of places. Replacements are no longer available to purchase, so decided to make a model to 3D print. These will work in place of Part…
Two-piece parametric OpenSCAD caddy holding two Samsung PM1733 (or any 15mm U.2 2.5") NVMe SSDs in a Supermicro SC846 chassis, using twang's HDD base mount rail system. Boolean-split at the drive boundary so each half prints flat without…
Note: Base can also be used to protect terminals on all M18 tools. A pair of caps for the Milwaukee 2846-20 Top-Off power suppy. They protect the outlets and switches on the top as well as the battery terminals on the bottom. I printed…
This model is a slimmed-down rear fan bracket for the Supermicro SC846 chassis, based on the original design by twang. It was modified to allow proper clearance when using the custom ATX PSU shroud. The bracket has been reduced to a…
A bracket to mount the brick build model of the Search and Rescue Cruiser Hermann Marwede on the wall. you need to print four of the bracket. The pin is optional, you can print four pins per bracket to get better connection between the…
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** No Supports: No **Resolution:** 0.2 mm Filament: Bambu Lab TPU TPU-95A Black Notes: Print with TPU and mount…
Two-piece parametric OpenSCAD caddy holding two Samsung PM1733 (or any 15mm U.2 2.5") NVMe SSDs in a Supermicro SC846 chassis, using twang's HDD base mount rail system. Boolean-split at the drive boundary so each half prints flat without…
A bracket to mount the brick build model of the Search and Rescue Cruiser Hermann Marwede on the wall. you need to print four of the bracket. The pin is optional, you can print four pins per bracket to get better connection between the…
Print with TPU and use double sided adhesive tape to mount the feet.
This model is compatible with the lego system.
