Counting matching models…
I am doing an LS1 ZF8HP70 swap into a BMW E39 and wanted a mock up motor and trans to make initial test fitting a lot easier. Refer to my other models for the LS1. I found a good quality 4WD trans scan and some partial scan data of a 2WD…
I wanted to print a portable eurorack case that could could be powered via a USB power bank and played on the go, so here's my 38HP travel skiff! I utilized the rotated 4HP 3U for power, multiple, and mute modules. No supports needed, but…
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
2x4 gridfinity organizer for the Baofeng UV-5G+, UV-5RM, AR-5RM, and BF-F8HP PRO radios *will not work with the antenna on the radio
This is a mount to put an F20/F30 8HP shifter in an E90 that came with an automatic. It is intended to re-use the stock rubber gasket from the original shifter. It needs supports drawn in around the nut retainers on the bottom, I do not…
This is a custom 19" rack mount designed for the Zyxel GS1900-8HP switch . It features left and right mounting brackets , each split into two parts , ensuring a secure and ventilated installation. The design includes ventilation holes and…
This case is designed to be used with a Jaspers synth stand, as such it is angled at 30º so that it can sit vertically when mounted. There are holes in each 3U row for a Topobrillo Eurobus power supply, and 3 different style of covers for…
Stand for a Baofeng BF-F8HP (UV-5R) radio connected to a Baofeng BL-5 battery eliminator. The belt clip on the back of the radio is able to compress the top of the stand, holding the radio in place. Print Settings Printer Brand: Creality…
Noisetäter eurorack blank plate 8HP. Instructions print plate with text facing up use 4xM3 screws (as usual with eurorack) Parameters own text: replace text in the Noisetäter label section no text: drop the whole Noisetäter label section…
Specifically made for the Zyxel XMG-108HP, but should also be useful for other switches with similair size: Width: 240 mm Depth: 105 mm Height: 27 mm This switch can get hot, so make sure you print it with material that can handle it. It…
A mounting system for IKEA Skadis pegboard and a Zyxel XMG-108hp POE switch. switch dimensions are 240mm x 105mm x 27mm Designed for vertical mounting and reversible. Just mount bottom cap, insert switch then use top cap to lock into…
Printed in PETG without supports or brim, using 0.4mm nozzle, 0.2 mm layer height and Prusament PETG profile in PrusaSlicer. Original designs attributed to Ghostguy6 and ddkaufman.
This cover was created to provide additional protection for the radio body while maintaining full access to all essential controls and functions. Features Designed specifically for the Baofeng BF-F8HP Lightweight and durable construction…
Skiff box to convert the Synthrotek Nandamonium eurorack module to console. Also works as a 38HP eurorack skiff. Drill your own holes! Remixed from https://www.thingiverse.com/thing:4704601/files Category: Music
Mirror from the decrepit blue site. May remix at some point to add holes for power cable, but here's the original for now. frogstompr's Description: Skiff box to convert the Synthrotek Nandamonium eurorack module to console. Also works as…
1U 19'' Rack Mount for Zyxel GS1200-8HP Managed Switch and its Powersupply
Throttle Handle for Mercury Marine 110 7.5-9.8hp. Tested on 1977 Mercury 110. It will work on many other mercury outboards but is not tested yet. Replaces part: 77238A1
A mount that fits on 1/2 inch PVC and holds the Baofeng BF-F8HP radio. Great for a tape measure yagi build
3D model for the Partron DMJ1538HPC DUPLEX FILTER
EURORACK 8HP VCO PANEL 8HP 2mm thick Eurorack panel for 5 pots and 5 jacks. Can be used to make a custom panel for mki x es.edu VCO module or similar modules Made using https://eurorack-panel-designer-oss8.vercel.app/ Caution: Can only be…
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
Throttle Handle for Mercury Marine 110 7.5-9.8hp. Tested on 1977 Mercury 110. It will work on many other mercury outboards but is not tested yet. Replaces part: 77238A1
did a rough scan on my ZF box to check trans tunnel clearance and design a rear crossmember. this model is NOT watertight and does not feature a scan of the sump as it was sitting on my bench when scanned. when i have time i will finish…
