Counting matching models…
use this stand if you want your Hazet Maintenance Unit mobile and not fixed to a wall. You will need 6 M6 bolts, washers and nuts as shown in the pictures and you have to mirror the strebelinks model if you don't use the presliced files.
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
Kerdom refused to provide taller headrests with their products so I had to make my own. Too bad. Functional part, ugly af but serves its purpose. Easy installation and sturdy (given print config below). I'm 1'78m (5'10'' for those…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…
Bracket and shroud to attach 2x 120mm fans on an Asus Prime RX 9070 XT GPU. Designed to be used with heated inserts, however STEP files are included so you can customize these to your own needs. It might fit on non XT 9070, however it…
Rx 9070 XT Reaper 2x120mm fan shroud Fan Shroud that fits 2 x 120mm fans on the Powercolor Rx 9070 XT Reaper. Important: This shroud will only fit with pcie-raisers, vertically mounted cards! The goal with this shroud was to reduce noise,…
Only support bracket for your precious RX 9070 XT.
This is a custom 3D printable shroud compatible with 25mm 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. For the demo build i'm using these filaments:…
Makes i possible to mount a 90mm fan to the original backplate. Threaded inserts are needed for this particular design
Based on the original design, I've removed the included Sapphire and Radeon logos to make it more stealthy. Should be printed using filament with high thermal resistance, ideally ABS.
Firstly, a disclaimer: This is my first serious project made in CAD software, I am a novice at this so the model might not be 100% perfect. I will be refining the design later on so any feedback is appreciated. Do this mod at your own…
I designed this model for my Microsoft Flight Simulator cockpit. I primarily use it with the Got Friends AS33 MSFS sim glider, but it should work with any other glider or simulator that allows undocking the LXN instrument via HDMI and…
Adaptor Plate to mount 3 Noctua Fans (2x NF-A12x25 and 1x NF-A9) to a XFX Swift AMD Radeon RX 9070XT Triple Fan Gaming Edition . Uses original mounting holes and screws from stock fan assembly for mounting on the cooler. Stock cooler can…
Able to use on XFX 9070 line, Swift, Quicksilver, Mecury as i made with tolerances in mind. m3*4*5 thread inserts are required The Cover frame file will do fine with 15mm and 25mm thick fans as long as fans share same thickness.
Although i measured 28mm oc from screw hole to screw hole when i printed it it was ever so slightly too small but starting with the middle screw allowed me to screw in the two on the sides without issue. I printed with PLA but the front…
My workplace's printer came to us faulty. the original gear (translucent white) came to us with broken teeth, and i could not get the xerox customer support to bring me a new one, so i just made one, using a 12 tooth gear that already…
Compatible with all XFX models lines ( Swift, Quicksilver , Mecury) as i had made it with toleance in mind ( Use M3x4x5mm threaded inserts, 20mm screw for slim fan (15mm slim fan) or 30mm screw ( for normal 25mm fan) This 3d print adapter…
Bill of materials: 4x M2x4mm Threaded heatset Inserts 4x M2x5mm Thumbscrews 3x M4 Self Tapping Fan screws (should be included with your fans) 1x PH2.0 4PIN PWM fan adaptor cable Zip-Ties to taste 2x Frame.stl 8x Gubbin.stl Print…
Travel brace for the 9070XT Reaper. The square portion is done that way to prevent brace from bending easily, and to allow users to leverage slicer capabilities to adjust the bracket offset if needed.
A Remix for use two 120mm fans. for Sapphire 9070xt Models: Pure and Pulse quick and dirty ;) 320mm long - may print in two parts (The image shows Option 1, which did not fit) The model was created using the hole spacing measurements from…
The bracket is designed to fit only that specific combination. Dan Cases A3 (from Lian Li). Sapphire - Radeon 9070 XT Pulse Upgraded my Gaming PC (DIY Steam Machine) with a 9070XT Pulse from Sapphire The fan configuration allows the…
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
A simple parameterized GPU brace designed to support the end of a graphics card and reduce movement during transport or daily use. I originally designed this for my S300 ITX build with a Gigabyte RX9070, but the model is parameterized, so…
Overview This is a remix of the bottom connector (bot) from the original PowerColor RX 9070 XT Reaper Custom GPU Shroud . The remix is intended specifically for builders using a LOUQE Ghost S1 , where the original bottom connector can…
M3 and M4 heat inserts needed. Also suitable M3&M4 screws required to mount everything. 120mm bracket requires 2x M4 heat inserts. End plate requires 2x M3 heat inserts. Note! M4 screws that connect the bracket to the fan mount must be…
A deshroud mod for the ASUS Prime Radeon RX 9070XT, replacing the stock plastic shroud with a low-profile, open-air design cooled by two 140mm fans. The card's existing heatsink and heatpipes stay in place — this mod only replaces the…
Внимание! Мне оказалась высоковата. Ужать до 15мм и должна сесть идеально. Поддерживает видеокарту и убирает горячий воздух. Печатал PLA
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
I designed this model for my Microsoft Flight Simulator cockpit. I primarily use it with the Got Friends AS33 MSFS sim glider, but it should work with any other glider or simulator that allows undocking the LXN instrument via HDMI and…
