Counting matching models…
Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Collection of screws (ISO 4017 / DIN 933) including : M6x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Collection of screws (ISO 4017 / DIN 933) including : M8x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…
Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
M10 bolts from 20 to 50 + nut DIN 933
Collection of screws (ISO 4017 / DIN 933) including : M10x 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
This is a collection of knobs for M3 to M6 DIN 933 hex screws. In each dimension there are 2 different knurled designs to choose. The knob dimensions are described in the table on the picture 2. To calculate the visible thread, you must…
This model is compatible with the lego system.
Collection of screws (ISO 4017 / DIN 933) including : M20x 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90, 100, 110 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…
Collection of screws (ISO 4017 / DIN 933) including : M16x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bmw E30 - wheel wrench holder (clip in the trunk). OEM-number: 51 47 1 933 468 Model reproduced from the internet pictures and designed for original hole dimensions =) Fits good in original place. Also holds good original wrench.…
LEGO Cadillac Town Car 1933
LEGO Lancia FIRE TRUCK 1933
Caboose wagon year 1933 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
This is one of my first models ever. You should print I with 100% infill. Its small and durable. I've added the step file so you could change it if you want.
I've been using this headphone clamp for a long time, it's awesome! I recently got a new G933 and realized how much the foam band had squished over time from resting on the original Monster headphone holder. I added an indentation so it…
My Dometic RML9330 Fridge Door Lock internal connector has broken and the little return spring. The spare part was found for £113.99, I thought I had to try build a replacement part myself. Parts need to be cut in the half for printing. I…
Bmw E30, E28 - sunroof assembly sliding jaw. OEM-number: 54 12 1 933 550. Reproduced with the dimensions of original part. Fits in place. I recommend to make this part with 2 steps: print this part by smaller separated parts…
Bmw E30 - front seats side cover clip (fastener). OEM-number: 52 10 1 906 933 Reproduced with the dimensions of original part. Perfectly fits on its original place. Will fit on original stock seats, sportsitze, recaro. Some sanding…
Bmw E30 - center side bar cover fastening (for OEM: 51 43 1 933 731, 51 43 1 933 732). Base dimensions copied from the original part (fastening). More durable\thicker model - to prevent future broking. I recommend to give a little sanding…
This is a right hinge pin for Logitech G633 headphones. The right hinge on mine snapped, so I took the broken pieces and designed this one. It could probably be mirrored to work on the Left hinge, but I've not taken them apart so I can't…
More part numbers and CAD formats on www.traceparts.com/goto?Product=32-07062010-095848
Impreso en PETG Layer 0.2 mm Infill 30% Soportes ON
This was modified to fit the Brother MFC-9340CDW paper tray where the tabs may break off on the paper end stop. The original design had a larger gap between paper and the stop and didn't fit close enough for my needs. Added 2 different…
This is a 3D-model based on the dimensions of a Tamiya part (19335209). The model is suitable for a M-type chassis, which is shown in the pictures. It is not 100% identical, there are differences. The hexagon interface is modeled 12,2 mm…
Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF.
Installation Instructions: Back Wheel for Philips FC9353 / FC9349 / FC9332 Remove the Broken Wheel: Use a flathead screwdriver to gently pry off the damaged or worn-out wheel from the axle. Clean the Axle: Remove any dust, debris, or…
Supporto per cuffie Logitech G933 in PETG
Hole in dash was too large for new ignition switch. Black PCTG
I used a soldiering iron to heat each terminal up to 250C then pressed them in. Also used a little bit of super glue to make sure they wouldn't loosen up.
A friend is re-building a 1933 Willys Jeep and asked me to design and print a headlight adapter. I used white PCTG
This model requires 4 M3x8mm screws for assembly and optionally M3 heat set inserts. Choose a hinge type that you want to use and print two, they should not need any supports. Print the left and right plates and glue them together with…
Try pierrot93300's part first. It is at https://www.thingiverse.com/thing:4295189 The coupler with my Davinci Pro 1.0 3-in-1 printer must've been larger as it did not fit the orignal thing. I modified his/her original part by ~3mm.…
A panel to replace the empty side panel on the left of these CRTs in order to have custom AV inputs.
I had a heavily used printer tray and the area above the handle started to break. Created this model after attempts to super glue failed to keep it together. Back part is used for drilling guide. There are 2 models Back which is 94mm…
Hang your G935/G933 headphones under your desk. Connects to openGrid using openConnect . Has a slot that fits the dongle under the arch.
Try pierrot93300's part first. It is at https://www.thingiverse.com/thing:4295189 The coupler with my Davinci Pro 1.0 3-in-1 printer must've been larger as it did not fit the orignal thing. I modified his/her original part by ~3mm.…
Memorial Plaque for the Victims of the Holodomor (1932–1933) This model is designed as a memorial to honor the victims of the Holodomor, the man-made famine that devastated Ukraine in the years 1932–1933. The plaque bears the Ukrainian…
This is a mirror of the "Scan the world" version from myminifactory. CC-NC-SA Text from Scan The World on " myminifactory " In 1933 Einstein fled from Nazi Germany. He sat for this bust, an outstanding example of Epstein’s 'celebrity…
Cover for modern outdoor wall-mounted lamp with lightsensor cutout. Measurements on the drawing in mm. Best printed in P
The battery you can usually find on replacement parts sellers is smaller than the original. It can jostle around if you bang your head as hard as I do when listening to music. Features: Printable in vase mode; Cutout for easy access to…
This is a 3D-model based on the dimensions of a Tamiya part (19335209). The model is suitable for a M-type chassis, which is shown in the pictures. It is not 100% identical, there are differences. The hexagon interface is modeled 12,2 mm…
This is a mirror of the "Scan the world" version from myminifactory. CC-NC-SA Text from Scan The World on " myminifactory " In 1933 Einstein fled from Nazi Germany. He sat for this bust, an outstanding example of Epstein’s 'celebrity…
The battery you can usually find on replacement parts sellers is smaller than the original. It can jostle around if you bang your head as hard as I do when listening to music. Features: Printable in vase mode; Cutout for easy access to…
fits the Gearwrench model 84933N socket set. May fit other similar sets but was specifically modeled for this set.
I have made this TPU case to fit original place of G933 batty. Original battery was week, therefore I have upgraded with this model:…
This model is compatible with the lego system.
I bought four rims for a Chevrolet Trailblazer, but they only came with one hubcap, so I copied it and spray-painted it to match the wheels, because in Europe, specifically in the Czech Republic, these hubcaps are hard to find and…
I bought a B2933 to charge my phone in my car to replace an older iOttie charger that mechanically grips the phone. The included vent mount was surprisingly stable, but because of the way the vent blade depth adjustment mechanism is…
The Invisible Man - Universal Monsters - 1933 3D printable model.
Universal Monsters - The Invisible Man - The Reveal - 1933 3D printable model.
Hex Filter Cage for Milwaukee M18 VC2 / Filter 4933464029 Drop-fit hex cage designed to protect the Milwaukee M18 VC2 vacuum filter. Prevents large debris from sticking to the filter surface. Optional mesh filter can be mounted over the…
A replacement battery cover for TCL RC933A remote control. Untested.
The Klein Laser Distance Measure 93LDM100C is a great tool for the money, but can wobble when measuring from a wall or other flat surface, possibly resulting in measurement error. This base provides a steady support and makes possible…
