Counting matching models…
The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for one variant
⚽ Visca Barça! 🏟 FC Barcelona is one of the world's most popular and winning football clubs, and the historical architecture of their home stadium belongs right here on MiniWorld3D! NEW! - The renovated 2025 SPOTIFY CAMP NOU is available…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
This model is compatible with the lego system.
Description This is a switch blank for a Golf Mk1 dash. Specifically, I designed this for the pictured area of my 1991 Cabriolet, above and below the hazard and defrost switches to the right of the instrument cluster, but it should fit…
Blank cover for the VW Polo 6N1 or SEAT IBIZA, INCA, CORDOBA
1957 Chevy Bel Air, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
First I want to say that gamebox13 did an incredible job on the original model. I printed this model with a 0.2mm nozzle at 0.1mm layer height. I printed the cab body of the truck in white, while I printed the wheels and the undercarriage…
Volkswagen Polo 6N1 central console USB charger Insert · Background: I've recently installed a dashcam in my VW Polo, before this I had only the phone holder and I used a cable to charge my phone from one of these car cigarette lighter…
This model is really a remix of a remix that I did and a model I did: 1968 Chevy Towtruck 1/64 Scale by Tyler Wiebe | Download free STL model | Printables.com 1957 Chevrolet Apache 1/64 Scale by Tyler Wiebe | Download free STL model |…
This model is compatible with the lego system.
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a thin and light filler funnel to assist with filling screen wash in a Porsche Cayenne 957. It may fit other Porsche models and other VAG vehicles (Volkswagen, Audi & Skoda ) (but I don't have any of these to test!). It fits…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995718 or 999 5718), but it is hard to get and if you can get it, it's…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a replacement for Traxxas Maxx wheel washer that goes under the wheel nut. It is part number TRA8957X. I printed it with PAHT-CF, which is a carbon fiber reinforced nylon. So far, it has held up well. After it is printed, I had to…
Hammer Films Scenes - The Curse of Frankenstein - 1957 3D printable model.
General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995719 or 999 5719), but it is hard to get and if you can get it, it's…
Maverick - Bret Maverick (James Garner) and Bart Maverick (Jack Kelly) - 1957 3D printable model.
This is a thin and light filler funnel to assist with oil filling and topping up for a Porsche Cayenne (957) V8 (Turbo or non-Turbo). It fits the oil filler opening nicely and incorporates air channels to allow air to escape as oil flows…
Vega$ - Dan Tanna (Robert Urich) with his 1957 Ford Thunderbird - 1978–1981) 3D printable model.
I made a simple hanger for the Festool 495717 FS-PA parallel attachment guide rails. I could not find a model for this attachment, so I quickly put something together that suits my needs. If it is of some benefit to your workshop, I would…
Here's an awesome truck for the Chevy fans! Heck, even if you aren't a Chevy fan, it's a pretty sweet truck. GM never made a crewcab Chevy Apache, so any that you see will be custom jobs. This case is no different, since the cab is simply…
Recording Artists - Jerry Lee Lewis - 1957 3D printable model.
Chevy 1957 convertible This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
Hammer Films Scenes - The Curse of Frankenstein - Monster with Girl - 1957 3D printable model.
VW LT Speedometer pinion 281957821G (Z=18) Designed but never used! Print and use in car on your own risk! Also if you scale up it looks good as an ornament on a desk.
I borrowed a cam locking tool and VVT seal drift from a friend for a VVT hub + cam seal job, and figured I would measure it and sketch it up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of…
Hammer Films Characters - The Curse of Frankenstein - The Creature - 1957 3D printable model.
Gumby and Pokey - 1967 3D printable model.
I was missing one of these blanks on my 1996 T4 looking at the prices of used blanks online I figured I could get quite close designing an stl instead, I printed this at .2mm in ABS I didn't clean the bed prior to printing, the original…
6/29/2024 added model modification Print Prusa Filament PETG 0.15mm structural, MK3.5 for the top layer, ironing can be used and then sanded with fine sandpaper. printed without padding mirror printed text freely editable in Prusa slicer…
Iconic Movie Moments - The Seventh Seal - Death's Appearance - 1957
A beautiful round flower vase; for decorative purposes to hold artificial flowers, or anything else. It is 180mm tall and 110mm wide. The photo shows the vase printed in vase mode, which prints a single wall. It can be printed in vase…
Had some trouble slicing the original design, and instead of modifying it I made this from scratch using the same dimensions. Example is printed in PLA, as I understand PLA withstands alcohol. (screenwash with antifreeze). However it…
This model is compatible with the lego system.
Ford Thunderbird 1957 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
This is a replacement part for the Lenovo Thinkpad TrackPoint Keyboard (KC‑1957/KU‑1255). The model stays faithful to the original design, with slight dimensional adjustments made for 3D printing. The model was originally created by a…
Tisk na dvě poloviny s podpěrami, výplň 15%, tryska 0,4, PLA.
Briggs & Stratton 794696 695756
Chevrolet Bel Air 1957
fully accurate re-ingenered original part
Chevrolet Bel Air 1957 Racing
Piece with the same measurements as IKEA 10039571 for use on the back of the METOD furniture
This holds 3 nozzles on top of the Quick 957DW+ hot air rework station. It reuses the screws and mounting holes that are already on the case – no new hardware required. I printed in PETG, 0.2mm layer height, 10% infill. I printed it on…
1957 Mack Moto plan Category: Vehicles
Maserati 3500 GT 1957-1964 Racing
Chevrolet Bel Air 1957 is a scale model STL 3d printable of a real civilian classic car, ideal for display and diorama projects. Print it to build a vintage auto collection, recreate a 1950s street scene, or add a highly detailed car…
This is a replacement part for the Lenovo Thinkpad TrackPoint Keyboard (KC‑1957/KU‑1255). The model extends the original by approximately 5 mm and is dimensionally adjusted for users who prefer a slightly angled setup. The model was…
Closing Cap for Kverneland Accord CX Discs Coulters (ref. AC495730) There are two different versions. The outside diameter is equal, but the inner diameter ist different (22 mm or 29 mm). Print instructions Supports: No Resolution: 0.2mm…
Mercedes Benz 300 SL Gullwing w198 1954-1957 Racing
A holder for the extra nozzles and a top-mounted rest for the tool.
I bought a NON-VVT seal drift to measure and sketch up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of walls (4 or more? Go nuts, I did 4 for this one. On the VVT one I did 10 since it's one…
Printed with 0.2mm layer height and support.
Scene at end of movie on railroad tracks.
To keep the nozzles together with the hotair gun in a way I can easily move it from the storage shelf to my desk and back without taking additional space I designed a holder to keep them under the normal hotair gun holder on the right…
A 1x3x7 Gridfinity container for the 3 hose attachments (3mm, 6mm, 8mm) for the Quick 957D
Microphone stand for pipe (diameter 28 mm) – Brüel & Kjær Array Microphone Type 4957. The height of the microphone is 5 cm above the bottom edge of the model.
Enclosure for TM9957-touchpad and its accessories extracted from TB-106U keyboards. The enclosure hold four parts: the touchpad itselt, small two button-pcb, flex cable connecting buttons to touchpad, and a pcb which connects the flex…
A custom backplate for the Fujitsu Q957 to fit a second LAN port. You need 3x 6-10mm M3 screws. I used this adapter: https://www.amazon.de/dp/B0CXSXPHYH
1957 Mercury Turnpike Cruiser Rear Deck Window Emblem Mounting Gasket Precise 3D-printed replacement for the original rear deck window emblem gasket on the 1957 Mercury Turnpike Cruiser. This part is identical to the factory dimensions —…
Armitage Shanks Drive Insert – S9575NU (Tap Repair Part) REPLICA This is a replica replacement drive insert for Armitage Shanks taps , part number S9575NU . It is used inside the tap mechanism to operate the valve, allowing the tap to…
Just a simple Fujitsu Q957 stand, nothing special.
This is an extremely simplistic mount for keeping 4 Fujitsu Esprimo Q957 or similar SFF PC's together for use in clusters as for example a Proxmox VE setup. It provides 4 keystone mounts for passing networking to the front and a simple…
A desk stand that holds a closed Dell Precision 5530 upright on its front edge. The hinge exhaust points straight up, and the bottom-cover intake and the left-side USB-C port sit about 150 mm above the desk, clear of the stand. Two fins…
General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995719 or 999 5719), but it is hard to get and if you can get it, it's…
Enclosure for TM9957-touchpad and its accessories extracted from TB-106U keyboards. The enclosure hold four parts: the touchpad itselt, small two button-pcb, flex cable connecting buttons to touchpad, and a pcb which connects the flex…
I borrowed a cam locking tool and VVT seal drift from a friend for a VVT hub + cam seal job, and figured I would measure it and sketch it up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of…
I bought a NON-VVT seal drift to measure and sketch up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of walls (4 or more? Go nuts, I did 4 for this one. On the VVT one I did 10 since it's one…
A beautiful round flower vase; for decorative purposes to hold artificial flowers, or anything else. It is 180mm tall and 110mm wide. The photo shows the vase printed in vase mode, which prints a single wall. It can be printed in vase…
1957 Mercury Turnpike Cruiser Rear Deck Window Emblem Mounting Gasket Precise 3D-printed replacement for the original rear deck window emblem gasket on the 1957 Mercury Turnpike Cruiser. This part is identical to the factory dimensions —…
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…
Maverick - Bret Maverick (James Garner) and Bart Maverick (Jack Kelly) - 1957 3D printable model.
Vega$ - Dan Tanna (Robert Urich) with his 1957 Ford Thunderbird - 1978–1981) 3D printable model.
50's Art - The Iconic 1957 Chevrolet Bel Air 3D printable model.
