P
PrintablesEd van der Heijden
VW Bus Pickup Year 1968 Designer Ed van der Heijden.
VW Bus Pickup Year 1968 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
- Downloads
- 1,250
- Likes
- 477
- Rating
- 4.75
Search results: 968
Counting matching models…
P
PrintablesXeNoMoRpH
John Deere (1968) key chain
Dimensions: 60.5mm x 47mm For multiple colors: 0.00mm - 2.00mm (green) 2.20mm - 3.00mm (yellow)
- Downloads
- 1,060
- Likes
- 105
- Rating
- 5
P
Printablesjuh
PCA9685 servo driver case (Fischertechnik or standalone)
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
- Downloads
- 640
- Likes
- 52
- Rating
- 5
P
PrintablesSireInsectus
PCA9685 16 Channel PWM Servo Motor Drive IIC Interface Module 12-Bit
See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image
- Downloads
- 581
- Likes
- 11
- Rating
- 0
P
PrintablesModel Magic
REVISED - Columbo - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 377
- Likes
- 38
- Rating
- 5
P
PrintablesModel Magic
Barbarella - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 368
- Likes
- 43
- Rating
- 0
P
PrintablesModel Magic
Wacky Races - Dick Dastardly & Muttley - 1968-1969
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 312
- Likes
- 38
- Rating
- 5
P
PrintablesModel Magic
Speed Racer - Speed Racer & Mach 5 - 1967-1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 254
- Likes
- 36
- Rating
- 0
P
PrintablesmoWerk
W639 Storage Compartment Repair Kit | A6396800291
The part number of the w639 glove storage compartment is A6396800291 You can buy a replacement compartment for roughly 120€ from ali express sellers or 250€ by amazon sellers. But we are here for nifty DIY solutions, right? This Repair…
- Downloads
- 213
- Likes
- 25
- Rating
- 0
P
PrintablesModel Magic
Wacky Races - The Slag Bros & Bouldermobile - 1968-1969
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 210
- Likes
- 31
- Rating
- 5
P
Printablesodonnell944
Porsche 944 / 968 Rear Main Seal Installation Tool
I didn't want to pay $200+ for a Sir Tools P234 arbor so I whipped this up. I sell these for $15 if you do not have 3D printing capability, but I am offering it (for NON-COMMERCIAL usage) here. That means you are not printing these and…
- Downloads
- 210
- Likes
- 16
- Rating
- 0
P
PrintablesModel Magic
Batman - Batgirl - 1966-1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 209
- Likes
- 37
- Rating
- 5
P
PrintablesModel Magic
Wacky Races - Dick Dastardly's Mean Machine - 1968-1969
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 203
- Likes
- 31
- Rating
- 0
P
PrintablesModel Magic
2001: A Space Odyssey - The Evolution - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 186
- Likes
- 22
- Rating
- 0
P
Printables3DCraft
ZAZ-968M “Zaporozhets” – The Soviet Classic That Refuses to Die
A rare piece of Eastern European automotive history — the ZAZ-968M, lovingly called Zaporozhets . Built in the USSR during the late 70s and 80s, this tiny rear-engine car became a symbol of simplicity, reliability, and pure character.
- Downloads
- 185
- Likes
- 35
- Rating
- 0
P
PrintablesZenome
Stand for Lego Harry Potter Car 75968 Privet Drive
Stand for Ron Whisley's car in the Lego Harry Potter set "Privet Drive" 75968. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.20 Infill: 20% Filament: Creality PLA White Category: Toy & Game…
- Downloads
- 178
- Likes
- 33
- Rating
- 5
P
PrintablesMgr. Pavel Krist
LEGO Lamborghini Miura Roadster 1968
Lamborghini Miura Roadster 1968
- Downloads
- 172
- Likes
- 37
- Rating
- 0
P
PrintablesModel Magic
Wacky Races - Penelope Pitstop & Peter Perfect - 1968-1969
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 169
- Likes
- 26
- Rating
- 0
P
PrintablesModel Magic
Once Upon a Time in the West - Harmonica - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 168
- Likes
- 23
- Rating
- 5
P
Printables@doegox
DA-968 Ultrasonic Cleaner Basket
DA-968 is a cheap Chinese ultrasonic cleaner, but it comes without basket. So, to avoid metal objects to be in contact with the container and permanent damages, I made a little basket to fit in the container. Designed such that it doesn't…
- Downloads
- 164
- Likes
- 17
- Rating
- 5
P
PrintablesModel Magic
Planet of the Apes - Nova - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 162
- Likes
- 32
- Rating
- 0
P
PrintablesModel Magic
Wacky Races - Penelope Pitstop's Compact Pussycat - 1968-1969
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 154
- Likes
- 20
- Rating
- 0
P
PrintablesModel Magic
Wacky Races - Peter Perfect's Turbo Terrific - 1968-1969
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 153
- Likes
- 23
- Rating
- 0
P
PrintablesModel Magic
Once Upon a Time in the West - Frank - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 151
- Likes
- 22
- Rating
- 0
P
PrintablesModel Magic
Hammer Films Scenes - Dracula Has Risen From the Grave - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 141
- Likes
- 21
- Rating
- 0
P
PrintablesModel Magic
Adam-12 - Pete Malloy & Jim Reed with 11971 Plymouth Fury - 1968-1975
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 138
- Likes
- 18
- Rating
- 0
P
PrintablesModel Magic
Sci Fi Movies - 2001 A Space Odyssey - Discovery One - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 133
- Likes
- 25
- Rating
- 0
P
PrintablesModel Magic
Night of the Living Dead - First Cemetery Zombie - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 130
- Likes
- 23
- Rating
- 0
P
PrintablesModel Magic
Once Upon a Time in the West - Jill McBain - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 129
- Likes
- 22
- Rating
- 5
P
PrintablesSprky01
1968 ACA Hurricane & ACA Hurricane MK1 model Lego compatible
A model of a 1968 or "Toob" ACA hurricane & ACA HURRICANE 130 MK1 that can be put on a Lego axle (file is now fixed)
- Downloads
- 118
- Likes
- 3
- Rating
- 5
P
PrintablesModel Magic
The Man From U.N.C.L.E. - Napoleon Solo and Illya Kuryaki Pistols - 1964-1968
The Man From U.N.C.L.E. - Napoleon Solo (Robert Vaughn) and Illya Kuryaki (David McCallum) Pistols - 1964-1968 3D printable model.
- Downloads
- 117
- Likes
- 18
- Rating
- 0
P
PrintablesModel Magic
Sci Fi Movies - 2001 A Space Odyssey - Space Station V - 1968
Sci Fi Movies - 2001 A Space Odyssey - Space Station V - 1968 3D printable model.
- Downloads
- 110
- Likes
- 22
- Rating
- 0
P
PrintablesModel Magic
The Thomas Crown Affair - The Meyers Manx Beach Buggy (1967) - 1968
The Thomas Crown Affair - The Meyers Manx Beach Buggy (1967) - 1968 3D printable model.
- Downloads
- 105
- Likes
- 15
- Rating
- 0
P
PrintablesModel Magic
Hammer Film Scenes - Dracula Has Risen from the Grave - The Staking - 1968
Hammer Film Scenes - Dracula Has Risen from the Grave - The Staking - 1968 3D printable model.
- Downloads
- 103
- Likes
- 17
- Rating
- 0
P
PrintablesModel Magic
Mr. Rogers' Neighborhood - Fred McFeely Rogers - 1968-2001
Mr. Rogers' Neighborhood - Fred McFeely Rogers - 1968-2001 3D printable model.
- Downloads
- 100
- Likes
- 29
- Rating
- 0
P
PrintablesKevin
PCA9685 Case + D1mini
Printed with Prusament Jet Black 0.3mm no supports are required.
- Downloads
- 99
- Likes
- 6
- Rating
- 0
P
PrintablesModel Magic
Planet of the Apes - Final Scene - 1968
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 98
- Likes
- 17
- Rating
- 0
P
Printablesodonnell944
Porsche 944 / 968 Transaxle Shifter Linkage Mod
This converts your transaxle linkage to a thrust bearing design. Has been installed on our rally car for over a year and has been perfectly fine (printed in ABS - see more info in printer settings section). Installation instructions are…
- Downloads
- 97
- Likes
- 12
- Rating
- 0
P
PrintablesThoralt
1968 Cadillac Vacuum Manifold V2
This is the second version of my take on classic Cadillac's vacuum manifold. The first version, while more dimensional accurate and closer to the original, is a lot harder to print and more fragile (see here ). What is it? The vacuum…
- Downloads
- 97
- Likes
- 11
- Rating
- 5
P
PrintablesKevin Wells
1968-1975 MG Midget Steering Column Cowl
This is a recreation of the steering column cowl for a 1968-1975 MG Midget, which seem to be pretty hard to find these days. I based this model off of the cowl that I copied from my 1978. I referenced pictures of the earlier cowls and…
- Downloads
- 96
- Likes
- 9
- Rating
- 5
P
PrintablesModel Magic
Hawaii 5-O - McGarrett and Danno - "Book 'em, Danno" - 1968
Hawaii 5-O - McGarrett and Danno - "Book 'em, Danno" - 1968 3D printable model.
- Downloads
- 90
- Likes
- 15
- Rating
- 0
P
PrintablesTom Anderson (The Real NEO)
944/968 HVAC control assembly mount
Ferdinand Porsche didn't like the cars in existence at the time so he built his own. We haven't built our own cars on our printers yet, but we can make replacement parts. Example: The Porsche 944 and 968 have a HVAC control that is…
- Downloads
- 85
- Likes
- 4
- Rating
- 0
P
PrintablesModel Magic
Horror Movies - Night of the Living Dead Collage - 1968
Horror Movies - Night of the Living Dead Collage - 1968 3D printable model.
- Downloads
- 82
- Likes
- 22
- Rating
- 0
P
PrintablesModel Magic
The Man From U.N.C.L.E. - Napoleon Solo and Illya Kuryaki Rifles - 1964-1968
The Man From U.N.C.L.E. - Napoleon Solo (Robert Vaughn) and Illya Kuryaki (David McCallum) Rifles - 1964-1968 3D printable model.
- Downloads
- 80
- Likes
- 16
- Rating
- 0
P
PrintablesThoralt
1968 Cadillac Vacuum Manifold
This is the original version I designed. For a much improved version, please have a look here . This is a replacement for the 1968 Cadillac vacuum manifold (5 port version) which is part of the climate control vacuum circuit and is…
- Downloads
- 80
- Likes
- 10
- Rating
- 0
P
PrintablesModel Magic
Rosemary's Baby - Adoring the Newborn - 1968
Rosemary's Baby - Adoring the Newborn - 1968 3D printable model.
- Downloads
- 77
- Likes
- 18
- Rating
- 0
P
PrintablesModel Magic
Iconic Movie Moments - 2001 A Space Odyssey - Hal's Lobotomy - 1968
Iconic Movie Moments - 2001 A Space Odyssey - Hal's Lobotomy - 1968 3D printable model.
- Downloads
- 77
- Likes
- 10
- Rating
- 0
P
PrintablesModel Magic
Dr. Who - The Wheel in Space - Cyberman - 1968
Dr. Who - The Wheel in Space - Cyberman - 1968 3D printable model.
- Downloads
- 76
- Likes
- 13
- Rating
- 0
P
PrintablesModel Magic
Iconic Movie Villains - 2001 A Space Odyssey - Hal 9000 - 1968
Iconic Movie Villains - 2001 A Space Odyssey - Hal 9000 - 1968
- Downloads
- 68
- Likes
- 13
- Rating
- 0
P
Printablesrsand2
Pan/Tilt servo mount with space for PCA-9685
Mount holds an MG-996R servo and a PCA-9685 PWM demultiplexer. It has holes for mounting on aluminum extrusion. The bottom servo sits in the housing (press fit) and the PCA-9685 attaches to the mounting posts with M2 bolts (10mm). Has…
- Downloads
- 68
- Likes
- 4
- Rating
- 0
P
PrintablesTwo Views Studio
No-mess oil filter wrench/socket for Fram filter PH9688
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
- Downloads
- 64
- Likes
- 10
- Rating
- 5
P
PrintablesMirco Slepko
Ford Mustang Fastback 1965-1968 Racing
Ford Mustang Fastback 1965-1968 Racing
- Downloads
- 60
- Likes
- 12
- Rating
- 0
P
Printablesjurkovic.richard
PCA9685 IC - ADAPTER HOLDER for DIN
PCA9685 IC - 16-Channel High-Precision (12-bit) PWM Controller Holder
- Downloads
- 55
- Likes
- 3
- Rating
- 0
P
PrintablesDD
HORN BUTTON BUSHING. PORSCHE 911 / 924 / 928 / 944 / 968 (from 1985)
Since I did not want to pay 5€ for the new part or wait a week for shipping, this design was created. I hope it is of great use for you! I printed this part using generic PETG using 100% infill on my Prusa MK4S.
- Downloads
- 49
- Likes
- 8
- Rating
- 0
P
PrintablesRaphi
Pontiac Firebird/Chevrolet Camaro 1968 Clock Housing with Bracket
Dash Clock Housing with bracket for 1. Gen Firebird/Camaro. Bracket size may need to be adjusted to fit holes in center console. Screw sizes: Bracket to clock 0.4mm screw (hole: 0.38mm) Housing to clock 0.3mm screw (hole: 0.275mm), can be…
- Downloads
- 49
- Likes
- 4
- Rating
- 0
P
PrintablesModel Magic
Iconic Movie Moments - Curse of the Crimson Altar - Lavinia Morley - 1968
Iconic Movie Moments - Curse of the Crimson Altar - Lavinia Morley - 1968
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
PrintablesModel Magic
Dr. Who - The Wheel in Space - Cyberman II - 1968
Dr. Who - The Wheel in Space - Cyberman II - 1968 3D printable model.
- Downloads
- 44
- Likes
- 12
- Rating
- 0
P
PrintablesSboubman
Bottom for ultrasonic cleaner WK-968
Bottom for ultrasonic cleaner WK-968 It is a bottom that will protect your objects and your ultrasonic cleaner Made for the popular WK-968 Length of 16 cm and width of 8 cm
- Downloads
- 44
- Likes
- 5
- Rating
- 0
P
PrintablesDerek Smoriga
Handle for SM 9684
Replacement handle for Severin SM 9684 milk frother. Printed in PETG lying on the side with support
- Downloads
- 40
- Likes
- 1
- Rating
- 0
P
Printablesgeni
Severin SM 9684 replacement lid
This is a replacement lid for Severin SM 9684. Created it for a friend who broke the original lid and it has been in use for more than a year now. Simple print without supports. PETG is recommended because of the better stability with…
- Downloads
- 39
- Likes
- 0
- Rating
- 0
P
PrintablesFeryx
Bicycle Chain Crankset Cover Guard 100mm 42T for decatlon Crankset Ref. : 968556
decathlon not have parts for theyown stuffs so i print my own guard. Ref. : 968556 Square-shaft transmission, 7-9 speeds
- Downloads
- 36
- Likes
- 2
- Rating
- 0
P
PrintablesAMerican_Car_LOver
1968 Chevy Corvette C3 Station Wagon
MUSCLE WAGON!!!
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
PrintablesShaggyDawg
Linda Harrison as Nova "Planet of the Apes" (1968)
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesShaggyDawg
Olga Schoberová "The Vengence of She" (1968)
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
PrintablesJori Helin
Front Grille Mesh: T2 Bay (1968-1972)
Replacement bug mesh behind the front grille for pre facelift. Replacement peice for VW part number 211259165. Print with TPU. 95A seems to work fine, but softer material might give better results for fitment. After printing all 4 main…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
Printables050671b41414
Gridfinity - Aoyue-968A Accessoires Holder
This Gridfinity 2x3 holder for the soldering tips and hot air nozzles of the Aoyue-968A solderingstation has four spare holes for additional soldering tips. It offers space for all four hot air nozzles. It was designed with the Fusion360…
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesMirco Slepko
Jaguar e-type series 1 1961-1968 Racing
Jaguar e-type series 1 1961-1968 Racing
- Downloads
- 20
- Likes
- 7
- Rating
- 0
P
PrintablesBigFootPL
Headlight cover gear for 1967-1968 Chrysler 300
Headlight cover gear for 1967-1968 Chrysler 300. See photograph of original and printed gear to confirm the model. PLA works, but Nylon would be perfect. Printed in 2 parts and glued together.
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesTriffen
Grippy ring for Singer Pro 5 (14T968DC) handwheel
If you find modern sewing machine's wheels too slippery, this model is for you. Well, this particular one is for Singer 14T968DC serger/coverstitch but its wheel is slippery too. Designed to print with slightly flexible filament I have,…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesSprky01
(Update!) Mini 1968 ACA Hurricane 130 (prototype/toob)
Uses #2 x 3/8 screws to mount the horn onto the chopper tube. Glue horn pieces together and chopper tube.
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesPrintmajstr
1968 Hard Times "Filament Painting"
Hello everyone! Before you start witch hunt, calm down. I have Full licence for use Hueforge. Picture taken by photographer Karel Bucháček in Prague, during the August invasion of Czechoslovakia by Warsaw Pact troops in 1968.…
- Downloads
- 16
- Likes
- 7
- Rating
- 5
P
PrintablesRunaboutDan
AC Door Actuator for 1965-1968 Ford Galaxie
AC Door Actuator for 1965-1968 Ford Galaxie to use a more modern Jeep blend door vacuum motor. The original is no longer manufactured. This is to replace the vacuum actuator on the top of the factory AC Box which frequently dies as it is…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesSascha_W
3fach Steckdose für DIN9680
Mehrfachsteckdosenleiste für DIN 9680 Stecker. Ich setze diese Stecker im Wohnwagen ein, um den Solarstrom zu verteilen. Hiermit können jetzt zwei Kühlschränke und Außenbeleuchtung an der Außensteckdose angeschlossen werden.
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printablesrobothut
Battery door for Remco 1968 Rudy the Robot & Tin Man robot
Here is a battery door that will fit the Remco 1968 Rudy robot and Tin Man robot. It is made in 2 parts so that supports are not required. You do have to make your own metal battery strip that is about 7mm wide and 60mm long. I will…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesViola Podzimková
Screw Nut for Beninca motor gate 9686873
Spare part for Beninca motorized gate system replacement for plastic nut Beninca 9686873.
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablesbgeezy4043
1968-70 Datsun Roadster interior door handle inserts (Read Desription)
1968-70 Datsun Roadster interior door handle inserts. This is not a print and ready to use part. It requires some additional work installing it. See my Instructables post here that has a step by step guide to installation. Must be printed…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesEdGJr
PCA9685 Servo Board LEGO Technic Enclosure - slight remix
My board didn't quite fit, so just trimmed some more room for the servo connector side.
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesMechanotronikum
Dampfventilgehäuse / Steam valve housing Jura Subito 630 Type 968
-- for english please scroll down -- Ein detailliertes nachkonstruiertes Modell des Dampfventilgehäuses der Jura Subito. Das Ventil, das eine Schwachstelle dieser Kaffeemaschine ist (entweder der Kunststoff wird bröselig oder Kalk…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesNemo
Moulinex Cookeo Ball Support / Holder – SS-996897 Replacement (Support de bille)
## Moulinex Cookeo Ball Support / Holder – SS-996897 Replacement This is a 3D printable replacement for the ball support / ball holder used in Moulinex Cookeo pressure cookers . I designed this part as a replacement for the original…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesdumbshop
mount for 1968 beetle shifter, micro switch mount.
1968 beetle shifter mount, it uses any microswitch really and mounts to anything you want as a switch, make it a key for a keyboard, off and on switch and or anything else. the guide holds the shifter in place and mounts the switch. very…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesMA ZAK
Alpha 7 Spaceship – Barbarella (1968 Cult Classic) – 3D Print Model
Barbarella’s Spaceship – Alpha 7 (1968) Bring the ultimate 1960s pop-art sci-fi icon to your build plate! This is the legendary Alpha 7 , piloted by Jane Fonda in Roger Vadim’s cult classic Barbarella (1968). Ditching the utilitarian…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesDavid Moore
Trojan Records Est. 1968 logo - ska/reggae 3D model for single filament multi-colour print
- ska band 3D model for single filament multi-colour print -- ska punk skapunk 2tone band logo rudy rudeboy rudegirl skank mod Australia -- My models are free but if you'd like to buy me a coffee https://buymeacoffee.com/davidlachlanmoore…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
(FIXED!!) 1968 ACA Hurricane & ACA Hurricane MK1 model Lego compatible
A model of a 1968 or "Toob" ACA hurricane & ACA HURRICANE 130 MK1 that can be put on a Lego axle (file is now fixed)
P
Printables
PCA9685 IC - ADAPTER HOLDER for DIN
PCA9685 IC - 16-Channel High-Precision (12-bit) PWM Controller Holder
P
Printables
Rosemary's Baby - Adoring the Newborn - 1968
Rosemary's Baby - Adoring the Newborn - 1968 3D printable model.
P
Printables
Hawaii 5-O - McGarrett and Danno - "Book 'em, Danno" - 1968
Hawaii 5-O - McGarrett and Danno - "Book 'em, Danno" - 1968 3D printable model.
P
Printables
PCA9685 servo driver case with hole
This is a modified lid for the PCA9685 servo driver case by juh , designed to accommodate a board with a taller capacitor. The case fits my board perfectly, except for the electrolytic capacitor. Therefore, I created a lid specifically…
P
Printables
InMoov i2 Head PCA9685 mounting bracket - remix
There's a version with only more room for cables from below (not recommended), but also the most recent version, suitable when guiding cables from the back.
P
Printables
Smuggler Box Drain Plug for Chevrolet El Camino (1968-1977)
🔧 Tired of water or critters getting into your smuggler’s box? The factory drain holes in El Caminos let water splash in from below while driving over water, leading to rust and water damage —even if you seal the trap door. 🐁 Mice and…
P
Printables
Lego Compatible (21968.dat) Body Ghost Slimer
This model is compatible with the lego system.
P
Printables
Joint feux de bas d'aile Mustang 1968
Joint pour les feux de bas d'ailes pour mustang 1968, ce joint n'existe pas d'origine Impression à faire en TPU
P
Printables
Porsche 944 968 Door Card Speaker Mounting Brackets
Lower mount is the same for both sides, front mount is mirrored
P
Printables
Planet of the Apes - Final Scene with Taylor - 1968
Planet of the Apes - Final Scene with Taylor - 1968 3D printable model. Prints in two parts. The big background and the tiny people. The people are EXTREMELY small, be very careful removing them from the supports.
P
Printables
Lego Compatible (79687.dat) Minifig Hair Male Just on Top
This model is compatible with the lego system.