98 models
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ After a successful print, rinse with water for a smoother finish. The Mini Pocket Slide Box (25mm Tall) offers expanded storage while maintaining its compact and…
I wanted to organize our small pile of home networking gear, so I designed this 3d-printed rack. From top to bottom, it holds: Feed-through patch panel with slots for 9 keystone jacks Cisco SG250-08 L3 managed switch GL-iNet GL-MV1000…
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
3D printable mold to pour silicone 9cm Westin clones YOURSELF! No supports needed. Would recommend ABS/ASA at the minimum to ensure quality pouring without destroying the mold. You can print either the master itself to make your own mold…
This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
Added few more mounting plates: Intel 7th gen NUC, unscrew front screws and pull into the mount, then screw them back to fix. TP-Link managed switch TL-SG108P(E) mount. Additional plate to mount power bricks and wires.
Prints exactly the same as the original, it's just taller :)
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
This model modified the original fan mounting part to fit 80mm fan, which allows more air flow to make the GPU even more cooler. Also the inner has been enlarged a little for the shrinking of ABS prints. The original model was created in…
I needed a very simple 9cm shelf bracket, sooo, I made it ! If you print it please post a make and give feedback. Thanks
After accidentally breaking this old PC fan I decided to attempt to fix it with a quieter design but still have decent airflow. You can probably do better, but I'm happy with it.
Auch verfügbar unter: https://www.etsy.com/de/listing/1643464244/blumentopf-9cm-3d-gedruckt-zion
ToDo list (checklist) stencil for 9x9cm paper note block. You can choose square or circle checkboxes. There are two versions with 8 and 10 items.
Photo Frame - Picture Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid Update 07/05/2025: added Hex Polaroid 9x9 Frame_1 REV_C.stl, geometry cleanup Resize to adjust dimension If you download/enjoyed this file,…
Rotate the model to stay flat on one of the nobs. Print settings TPU 95 material 20% Cubic infill 3 walls normal supports
I needed to hang the mini rack off the wall and modified this to accept 4 screws. The holes are 4mm so any reasonable size screw will work. The shelf visible in my pictures is this on from Moshe. Check out my other models for Home…
Customized version of https://www.thingiverse.com/thing:3592064 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3592064 Instructions Using the following options: length = 1099 Category: Accessories
Photo Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape Type Modulare - Portafoto modulare per Polaroid If you download/enjoyed this file, please leave a like - Thx
Ein einstellbarer Fuß für Möbel, dieser wird mit 3 Schrauben an dem Möbelstück befestigt und kann dann mit der großen M30 Schraube in der Höhe eingestellt werden. Lässt sich einfach drucken mit PETG oder PLA. Das Innenteil ist 3% kleiner…
I needed a pen tray that fits on the Prusa Mini bed and under my monitor. Super simple design with sizes 17cm by 9 cm. You can use it to store whatever knickknacks you have laying around.
Contenedor de 6 posavasos para posavasos de 9cm de diámetro / Container of 6 coasters for 9cm diameter coasters
turntable 19 cm in diameter, with a 608z bearing in the center. I made this little tray to make scanning easier with the Creality Scan Ferret Pro 608zz : https://s.click.aliexpress.com/e/_DBGj5nZ
They should all fit in with friction. The SB8163 gets hot so give it plenty of room and air flow. For the Unifi Lite, use a zip tie. It works ok.
Mit diesem Halter kann der Gothic Bird Feeder von 3DMDesign auf einem 9x9 cm Pfosten montiert werden. Um zu verhindern, dass das Futterhaus sich auf dem Halter dreht, habe ich ihn mit doppelseitigem Klebeband festgeklebt. Am Futterhaus…
Kleiner süßer Drache mit Aufhängung - Breite ca. 19cm Länge 12cm Auch beim Druck mit nur einer Farbe ergeben sich tolle Farbnuancen aufgrund der geringen Schichtanzahl. PLA / PETG 0,2mm oder 0,1mm
Ich habe den Baum mit PLA in mattem Hellbraun gedruckt, wodurch er aussieht, als wäre er aus Holz gearbeitet. Der Baum ist 9 cm hoch und besteht aus 6 Teilen und einem Fuß. Nach dem Druck müssen die Teile noch zusammengeklebt werden. In…
Print settings Tested with PETG. Should work with PLA 20% infill No supports 0.4mm nozzle Features 10mm height Vent holes on the bottom 1mm sunk border for a snap fit
This is the first 3D model I've ever shared , designed in Fusion 360! It's a horizontal wine bottle holder for two bottles , stacked one above the other, keeping the cork in contact with the wine and the label clearly visible — perfect…
This is a remix of my filament stand / spool holder to make it even more narrow and fit into my drybox. you can either use my bearing axis from the main post or this simple axis without bearings, all parts are interchangeable. How to…
Skoda wheels Logo ⌀9cm if you want you can make it smaller and fit it as car logo. Model was colored with marker
Some hangars to hang the Fejka plants from an Äpplarö rack. As shown in the picture, they need a gentle nudge to "clip" over into the rail but fit nice and snug. I printed in Galaxy black PETG Sorry for the rotated pictures ... :) Print…
Created some additional mounts for the 19cm Rack, following the original dimensions. Except for the Optiplex Mount they all hold themself and have locations for the originally designed wallmount screws. For the screws I used M3…
Network Switch Pannel for the SODOLA 8-Port Unmanaged 2.5G Switch,8 x 2.5GBASE-T Ports,1X10G SFP+,100Gbps Switching Capacity, Fanless, Metal，Plug & Play 2.5Gb Network Switch . https://www.amazon.com/gp/product/B0CKP5648P/?th=1 Compatible…
Heavily influenced by https://www.printables.com/model/121813-simple-9cm-bracket-shelf
Impreso con boquilla de 0.4, pero no habría problemas en usar una de 0.6 En lo personal usé 3 perímetros para no tener relleno en las paredes. Pero no tiene ninguna dificultad.
This panel let's you mount the SwitchBot hub to the Blinkinlabs' mini rack .
Simple Model to mount a 9cm flowerpot from Ikea (called Fejka) on a Skadis board. Stick the backplate on the flowerpot and use the great mounting solution from @LayerCake (…
Tired of your robot vacuum getting stuck? This is a remix of the excellent original BROR Riser design by https://www.printables.com/model/415849-ikea-bror-adjustable-foot . The main difference? Now you can choose your perfect height! The…
WHY? Finally You don't have to look for pot cover and pad that mach, You won't lose one of them. Also it helps to avoid knocking over the pod in windy conditions, when placed outside. PRINTING Printed as one piece. Print in natural…
Top cover for the Snapmaker U1 3D printer. A 60L container (59cm x 42cm x 36cm) is used. Printed with a layer height of 0.2 and a line width of 0.65 , infill density of 10% with a Gyroid infill pattern. Total weight is approximately 320g…
A nut attachment for an IKEA 19cm bowl to separate nuts from their shells. Printed with PLA Link to Bowl: https://www.ikea.com/de/de/p/ikea-365-schuessel-weiss-00468130/
I have created a remix to suit my specific needs. This serves as a gap filler for my IKEA Billy shelf, where I mainly store pigments and other paints. There are no special requirements to consider when printing.
UCG-Ultra mount for Blinkinlabs's 19cm network rack. Uses four M3 4.6mm diameter heat inserts on the back and a back plate that can be downloaded from the original model by n3rding here:…
Dieser Stand besteht aus zwei Haltern die überkreuz zusammen gesteckt werden können. Eine Gaskartusche mit einem Durchmesser von 9cm kann darin sicher stehen. Ein aufgesteckter Kocher oder eine Lampe stehen dann sicherer und kippen nicht…
A remix of SherlockWatson's Raspberry Pi Rack mount, changed to suit the 19cm Network Rack by Blinkinlabs . Mounts with a couple of 3MM screws, there should be plenty of room for hats on top of the pi though mileage may vary. Feel free to…
This is a little (9cm x 6cm) mini photo frame consisting of 2 parts: Front part. With heart shaped hole for a photo. Back part. With a small stand. Printing: The whole model is designed that it can be printed without supports (if your…
90mm x 90mm Update: Shelf installation was hard as it was in one piece, so the shelf now slides onto a rail where the screws are installed. The corner is also rounded off as the right angle did not fit into the actual corner of the…
Originally printed on BambuLabs A1, 0.4 Nozzle, 15% infill, PLA (Prints fine on 166% speed)
Couldn't find a mask ear saver that fit my needs, so here it is. Made it for traveling - small and portable
Like the summary says. Powertec rails are considerably wider (19cm) due to the added flexable part near the blade. These are 191mm and they fit like butter. I just used some M5 x 30mm bolts because it's what I had laying around and it was…
I use grage/ladder hooks as heavy duty wardrobe rails to hang my motorcycle leathers. They rock from side to side and make a mess of the wall and work the rawlplugs loose. I made some support pieces that stop them from doing this. I think…
Hey! I made this really simple GPU holder so no more GPU drooping👍 9cm tall and 0.75cm thick. Highly recommend printing it out of PETG or ABS, because it needs to be heat resistant and being near gaming pc components is not good for PLA,…
使用 M3-M4 螺钉。硬盘盒后面的散热风扇为 12个 20-12 个 25MM。硬盘盒的背板使用自定义的背板大小。电源使用 FLEX 电源（1U 电源）。电源开关的孔径为 16 毫米。第一部作品虽然有缺点，但可以作为参考。 类别： 小工具
Filter holder 8.9x8.9 cm for use in the Krokus 4sl (round) photo enlarger. The filters I designed the holder for are Foma Varian Filters (8.9x8.9), but should work with others. It consists of 2 parts - the holder itself and the pressure…
Simple diagonal brace - 9cm for Tevo Tarantula Y-frame - has mounting holes to secure this to a base plate. I guess you could use it for other corners as well. I also have a 15cm version of this - https://www.thingiverse.com/thing:2626456…
Semi-hydro base insert for 9cm IKEA NYPON / 9cm IKEA FNITTRIG . No provision for fill pipes or water level indicators; swirl the pot gently and feel or listen for the water level. Should be thin enough that infill doesn't matter, but if…
Table calendar stand | Tisch Kalender Staender calendar = 21cm x 29cm
Untersetzer für Pflanzen, verhindert das Pflanzen im Wasser stehen, belüftet die Wurzeln.
Printed using TPU95A using the following settings: 0.4mm nozzle 3 walls 30% gyroid infill Add modifiers for these regions in slicer and increase to 4 walls 90% infill for strength. Please do not ask me if it will work with other luggage…
This is a 3D printable Bitcoin wall sign , designed to be illuminated with LED strips and mounted on the wall — perfect for crypto lovers and modern decor! Key Features: 19 cm radius – easy to print on most 3D printers Groove fits LED…
Fits the Ikea Förenling small pot (9cm) perfectly but can also be used for other small pots. In that case you need to measure yourself. Easy print, without supports. Use them not just for plants! They are fun for holding colorful pencils…
The design is from the IKEA UTSÅDD Pet Bowl. I measured everything as best as I could and modeled it up for another project I'm working on. I haven't tried printing it (nor will I), so I can't confirm it prints well. IKEA UTSÅDD Pet Bowl:…
Cable Channel clip for 19cm Network Rack. Allows for cleaner routing of cables
Floor stand for vase. Printed on PETG 4 walls and 15% infill.
This model is a large, two-part winter silhouette created in a geometric layered style. It features a mountain landscape, a small village, Santa flying above, pine trees, and other festive elements. The artwork is intentionally designed…
a plate to hold 3 ikea HALVTOM 19cm bottles.
Cable organizer for desk prototype 2 1.9cm
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait cancer 3D print mold 4mm cutout for plastic eyes 1. stl form of cancer bait 9cm…
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
Hi everyone, The Doily dispenser offers space for 18cm rosettes for plates in the main compartment and 9cm discs in the side compartment for saucers, e.g. for coffee cups or espresso. Ideal for use in cafés or restaurants. Exact features:…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
This is an Elecrow 5 inch isplay mount for the "19cm network rack" https://www.printables.com/model/108975-19cm-network-rack made using this hook mount : https://www.printables.com/model/85016-desktop-pi3b4b5b-mount-for-hdmi-lcd
This model is a large, two-part winter silhouette created in a geometric layered style. It features a mountain landscape, a small village, Santa flying above, pine trees, and other festive elements. The artwork is intentionally designed…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
3D printable mold to pour silicone 9cm Westin clones YOURSELF! No supports needed. Would recommend ABS/ASA at the minimum to ensure quality pouring without destroying the mold. You can print either the master itself to make your own mold…
Top cover for the Snapmaker U1 3D printer. A 60L container (59cm x 42cm x 36cm) is used. Printed with a layer height of 0.2 and a line width of 0.65 , infill density of 10% with a Gyroid infill pattern. Total weight is approximately 320g…
ToDo list (checklist) stencil for 9x9cm paper note block. You can choose square or circle checkboxes. There are two versions with 8 and 10 items.
WHY? Finally You don't have to look for pot cover and pad that mach, You won't lose one of them. Also it helps to avoid knocking over the pod in windy conditions, when placed outside. PRINTING Printed as one piece. Print in natural…
Print Guide: no supports! PETG! 0,6 nozzle recommended 0,4 nozzle possible 3 Walllines, 20% Gyroid infill Our filter mount for grow tents allows you to secure your carbon filter safely and space-efficiently. The robust holder is ideal for…
Print Guide: no supports! ASA! 0,6 nozzle recommended 0,4 nozzle possible 3 Walllines, 20% Gyroid infill Our filter mount for grow tents allows you to secure your carbon filter safely and space-efficiently. The robust holder is ideal for…
Quick design of a Kitchen drawer organiser i made, because none i could find truly fit my kitchen drawers
This is an Elecrow 5 inch isplay mount for the "19cm network rack" https://www.printables.com/model/108975-19cm-network-rack made using this hook mount : https://www.printables.com/model/85016-desktop-pi3b4b5b-mount-for-hdmi-lcd
Lid 29cm diameter for Joule sous-vide device. You need to print 3x other_part file
Remix of the 10" mount to fit the https://www.printables.com/de/model/108975-19cm-network-rack
car cup coin holder for two types of coins 2.5cm and 1.5cm as well pin holder
Easy to print token tray. Approx 9cm square and 1.5cm high.
Lightweight and thin version of the shelf for a 16mm pipe
This is a front plate or a mount for the Home Assistant Yellow for the Blinkinlabs 19cm Mini Server Rack. It uses the two front screws from the bottom of the Yellow. The hole to the right is for the cables if you decided to route them to…
