Counting matching models…
Hello everyone, I present to you the model of the car Tayota GR Supra A90 The model is presented in its original form This model is free and therefore here only the chassis and body with headlights are shown. details of the left side, you…
I made a wall support for the Galaxy Tab A9+. As the model is quite large with a side measuring 264mm, I used my Sidewinder X1 3D printer to print it. (You can find the version for the Tab A9 (8,7") here Samsung Galaxy Tab A9 Wall Mount…
This is my original Pile of Poo 3D model, first published on Thingiverse on 2016/07/20, now hosted on GitHub . I am publishing it on Printables as well so everyone can more easily attribute it as a remix. Check the GitHub repository for…
This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.
Change log: 03.08.2025 - v2.1 released. Much better sizing for the one.pice model. 02.06.2025 - A one-piece model v2 for printing with TPU added. STEP file can be downloaded. Some dimensional inaccuracies adjusted. 25.04.2024 - First…
This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image
I edited the model in Blender/3D builder/Slic3r to make it easily printable. Print the car and 4 wheels, then glue them on. Be warned the file sizes are quite large. Check out my print-in-place optimized version of a Supra:…
So my Dad has an Elgato Stream Deck 15 Key (20GAA9901) and was wanting a desk mount after seeing my Stream Deck Mini Under Desk Mount which was my first Custom 3D Printed Design. (See new Mini Deck Mount here ) This should have less flex…
Adjusted the model made by DeluxeBabble to fit the Samsung Galaxy Tab A9. The lid is held with glued-in magnets (5mm x 1mm). There is clearance at the bottom for the charging plug.
TPU model A92, relatively soft), to fit the door. It is already positioned for printing and does not require supports
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This wall-mount case is designed specifically for the Samsung Galaxy Tab A9+, providing a snug fit so your tablet stays secure. It’s perfect for creating a home assistant panel or an in-home media hub. There are two versions included: 1.…
Fan duct to help direct airflow into Noctua NF-A9x14 (92x14mm) fan used in the NH-L9 series coolers. Designed with the Noctua L9i in a small DeskMini PC in mind but should work with similar models. Flaring built into the duct mirrors the…
Ersatzteile für Braas Atelier BA91/AF81/AF86 Dachfenster: Griffhebel, Konsole und Schieber. Die Modelle sind für die linke Seite, für die rechte Seite das Modell im Slicer spiegeln. Replacement parts for Braas Atelier BA91/AF81/AF86 roof…
This is a 1/48 scale print-in-place high quality model of a new (A90/MarkV generation) Toyota Supra The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels move. It's a fun, fairly…
If u wan't print this take patience. All print's (except wheel) hyper pla on k1 max. Read extra comment on model to print, one or more models need scale in slicer. Used components: ~1Kg Hyper Pla M3 screws (16mm or 20mm) x14 M2 screws…
I made this fan guard for the Noctua NF-A9 FLX which I mounted on the cover of my Geeetech A10 power supply. The guard is supposed to be mounted only on the side of the fan, where the air comes out. This is because of the hole in the…
Case for the Samsung Galaxy Tab A9. I needed a protective cover for my kids tablets that could withstand a beating so I made this. It has already taken quite the beating and proved to protect the tablets successfully. The fit is extremely…
Noctua NF-A9-14 90mm fan cover for Meanwell PSU. Although intermittent, the stock fan on the Meanwell LRS 350W is loud when running. Switching it out for a 90mm noctua fan significantly reduced the fan noise. I've reduced the hex mesh…
Template for mounting plate for ZyXEL routers: [NWA50AX] https://www.zyxel.com/global/en/products/wireless/80211ax-wifi-6-dual-radio-poe-access-point-nwa50ax [NWA90AX]…
NV-AA1-09 Airflow Amplifier specified for NF-A9X14 92mm Fan, with a custom support and two fixing points with M3 screws
Remixed to accommodate the Arlington DVFR1W-1 electrical box and split for an Ender 3 bed size
Samsung Galaxy A9 wallmount Can be edited here: https://cad.onshape.com/documents/22df604042e0c796569dff65/w/5836d3fae4b30b70a04e7c29/e/071edc4abf1a8c5c5133de00?renderMode=0&uiState=6642402c7981df6e49de0fdd
This is made to try helping others to make this fun little RobotGeek 9G robot arm. I will try to explain what is needed to build it. Program it and what pc software to use to control it. Post-Printing Part List 1x Arduino Uno…
A longer grip for the Sony A9 and A7iii. Through-hole to allow for the battery to be changed while the grip is on the camera. https://www.shapeways.com/product/3RS4675J9/sony-a7iii-a7riii-a9-grip-extension Category: Camera
I needed a new wall display to interact with Home Assistant in our house. I decided to get a cheap Samsung A9+. To mount it to the wall I designed this wall mount. The tablet is charged while in the mount while still being removable.…
I love my new TV. Unfortunately, my kids love it too. The nice remote that comes with it, has been played with and dropped on the floor already a few too many times. So I decided to design and print a case for it. This is a flexible case…
These are a set of very cool looking drift tires for the Wltoys A979B. This may also work for the non B version or other cars with a 7mm hex. I printed the rims with white PLA and used 4 walls. The wheels are printed in TPU. When the fit…
Wall mount for a Samsung Tab A9 which will mount on a standard UK/EU single electrical pattress box (60mm centre) Includes wiring route for 90o USB C connector back to in wall charger mounted in the patress box Includes a press fit…
I wanted to mount my Samsung Galaxy Tab A9+ to the Multiboard or a wall. Parts Needed: 4x Drop-In Nut Snap - M3 for mounting. 4x M3 Nuts 4x M3 8mm socket head bolts Change Log: V2: Added a notch to the top clip to fit/slide over the…
Someone (occasionally) discarded original coffee ground box from Jura coffe machine at our lunchroom and I've modelled and printed a replacement using pictures from coffee machine manual. It works well at our Jura A1 machine. This is much…
1U 10" Rack Fan Tray for 92mm Fans (Noctua NF-A9 Compatible) This is a custom-designed 1U tray for a 10" server rack. It is sized to fit a standard 92mm fan—specifically designed around the Noctua NF-A9 5V PWM , but it should work with…
This is a holder for Samsung Galaxy Tab A9 Lite SM-X110 tablet, which you can screwto the wall. Power would come from the back. I would recommend getting angle power cable. Description on Youtube:
This is a set of files for improving the steering angle of the Wltoys a979 (also for a959 and a969). This model's steering system articulation is way too low and the wheels may only turn 10-15 degrees most which causes the turning radius…
LG A9 CordZero remix for additional tool holders to be fitted to the stand based on LG A9 Cordzero - Attachment Wall Holder by Snuffypot11 - Thingiverse UPDATE : 03/01/2021 Added a Multi Tool version so that if you have the Total Care Kit…
Printed with Prusament Jet Black 0.3mm no supports are required.
Este modelo se recomienda imprimir con material TPU y muy recomendable imprimir con la lamina texturizada.
This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. Which donor mice does this mod work with? I have tested the Corsair Sabre Pro V2 , and that is the mouse I am…
Folding High Tower Armory 90/22 charging handle. I used a threaded insert on the base, and screws on both sides to affix it. Also a random torsion spring.
So this was my first remix on thingiverse :) Original design had only 1 holder for LM2596 buck converter, but locally I could only find LM2596S and wanted to fit more than 1 inside the cover. That's how this remix was born. Improvements…
Perfectly fitting chinmount for the HJC RPHA90S and RPHA90.
This is my second (and probably my last) iteration on the bottom cover and fan of my FlashForge Adventurer 3 (Monoprice Voxel). A few months ago I shared a similar design for 40mm and 80mm fans. Those improve the airflow around the…
The weapon of legendary RCM Officer Kim Kimball Kitsuragi. With this exclusive prop you'll even be able to shot down hanging body, if you have good aim. There is a hole between cylinder and handle for a screw, but it should be hold…
Mount for attaching a Samsung Galaxy A9+ besides a printer. Also, see https://www.printables.com/model/1712443-detachable-adapter-for-4040-or-3030-profile-for-th
We needed something to be able to hold the EFT unit to a charging base but also be easily unmounted, but the ones offered only allowed a more permanent solution. So I designed a base and screen holder to allow such a thing. I made it for…
This is a fan adapter to replace the stock CoolerMaster CPU fan with a Noctua NF-A9 PWM in an Acer XC-1660 PC motherboard. This fan adapter converts the 71.5mm stock fan bolt spacing to the larger square shroud on the Noctua NF-A9 PWM at…
I wanted to replace the already pretty quiet but still server fans of my Supermicro SYS-E300-9A with some more quieter Noctua NF-A4x20 PWM fans. Unfortunately, the original screws and the screws that come with the fans both don't fit to…
This is headlight dust cover cap remixed to fit LED bulbs Works as replacement for part numbers: 3AA941607, 90009172 Tested on WV Passat B7 but should work other models and brands with same part numbers.
I did'nt have any plate to fixate this magnificent little robotic arm to. Therefore i desided to make a base for it. The base features removable legs. So that it will take up less space when stored aside while not in use. This is also…
Winwing / WINCTRL Mounting Bracket Stand for PAP3, FCU / Tab A9+ or other 11″ Tablets – 3D Printable Model This 3D-printed mounting bracket is designed to hold two 11″ tablets - such as the Samsung Galaxy Tab A9+ shown in the images -…
The LG A9 cordless vacuum comes with a wall mount, but only enough space for 3 nozzles at a time (if you count the vacuum itself), but it has 5 pieces. So naturally I made a mount for the extra pieces. It hangs far enough off the wall for…
A Caddx Peanut mount for Beta95Xv3. It is a strait replacement for the original SMO4K mount. If You're planning to carry a camera - you are since your searching for a mount for it - I would strongly advise to squish with screws that…
Read more at: http://www.drracer.eu/3dp/20160225_vortex/index.html (in English)
PCA9685 IC - 16-Channel High-Precision (12-bit) PWM Controller Holder
It is a chunky case that doesn't require supports. Make sure your bed is more than about 265mm wide for this to fit.
A remix of the TP-Link wall mount - drill-less by derekzoli. https://www.thingiverse.com/thing:734126 I removed the square part and added two screw holes. Fits the TL-WA901ND and 801ND perfectly. Print Settings Printer: Anycubic i3 mega…
Replaces the stock two-point mount with a modular bracket that supports up to 7 mounts total. The mounts lock the accessories in, similarly to the original mounts, while also preventing them from spinning. Some variations of these mounts…
Fits nicely to organise small parts. I used many for both small screws and electronic components. The inside of the insert is "rounded" to make it easy to pickup parts.
Replacement Knobs for the Kaiser KA9040 The channel selector on my old Kaiser CB Radio broke, so I designed a replacement. I didn't like the look of the 3D-printed selector when in use with the original potentiometer knobs so I also…
Pretty accurate model of the Hisense A9 E Ink Smartphone. I needed a model to build a case around. Hopefully this helps someone else! p.s. this was modeled with $4 plastic calipers so measurements are “accurate to within an eyeball”.
Toyota Supra A90 This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
The tires on my venerable WLToys A979a finally wore out, along with the wheels all being broken and made of mostly glue, and as a replacement set was ~$15 I thought I'd try printing some. These tires are "airless", and are locked to the…
This is my 4th model in Fusion 360, my 2nd enclosure and my first publicly available model. I made a handful of iterations on the primary case and a couple on the lid. Took me about 5 hours with the iterating and testing my design. Its a…
Outdoor use, print with ASA or other UV resistant filament.
I designed this to replace a broken “wing” for my Audio Technica a900x. Designed it to be a functional replacement doesn't match the original exactly. Tested with PETG. Print on it's side to get the best strength for the clips. Requires…
inmovilizadores para dejar fijo tanto la grabadora laser como la base para evitar tener que estar alineando a cada rato. se fijan con tornillos a la base de madera o a la mesa (recomendable una tabla para no romper la mesa). se tendrá que…
Designed for Samsung Galaxy Tab A9 LTE (X115N). Allows to easy remove the tablet. Secure the mounting with double-sided tape. Supports required.
Printed in PLA. Fits well and mixes well with original inserts.
Print the two parts and insert the TCA9548A multiplexer inside them then pull the source wires going to your controller through the small slot on the back side of the adapter. Use the larger front opening of the adapter to connect the…
I developed this Naked GoPro Mount/Case/Holder based on the idea of Tommy Tibajia aka. Ummagawd. I found his design inspirational, but I thought I could improve it in many aspects. At the time I started designing I only had a GoPro Hero 5…
Dies ist ein Absaugadapter für den Black&Decker Bandschleifer ("Elektrofeile") KA900E. Der Eingang hat einen Außendurchmesser von 25mm und paßt in den mitgelieferten “Cyclonic Adapter”. Der Ausgang hat einen Durchmesser von 34,5mm und…
Noctua 92mm x 14mm fan case for Minix NEO Z100-0dB. https://noctua.at/en/products/fan/nf-a9x14-pwm https://www.minix.com.hk/products/z100-0db-fanless-n100-mini-pc The fan is connected to a USB port (5v).
This adapter allows to connect vacuum cleaner hose (35mm) to B&D KA900E belt sander. The dust cassette has to be removed at first. Printing with PETG and 2mm thick walls is recommended.
I lost the knob of one of my rotatry valve motors (ARA600) and it is woth of 25 bucks as a replacement part. So I decided to give it a try to design my own and print it. This knob does not fit the valve directly without motor unit. I'll…
Designed this to get the hub off the top of my desk but allow it to be easily accessible. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 20% Filament:…
Potentiometer knob/insert made to use with potentiometer CA9 V10 (100 Ω → 4,7MΩ) https://www.cypax.dk/pdf/ACP-CA9-CE9.pdf/ Potentiometer CA9 V10 is normally adjustet with a schrew driver. But this allows you to use it with a knob
Those are lids for Raaco Boxxser insert A9-1. Because the polycarbonate cover is not tight enough for really small hardware like small washers. Print Settings Printer: CR-10 V3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…
Accessoire support pour téléphone Oppo A96 avec sa coque pour tripode. >> Please post your makes <<
Print for mounting Noctua NF-A9x14 fans (frame removed) to PowerColor 7800 XT Fighter GPU (potentially other models as well, not tested).
Vertikální grip na zabraň M16 od značky SPECNA ARMS konkrétně modelu SA-A90. Grip je dělán pouze na předpažbí tohoto modelu, tudíž nezaručím že bude pasovat na jiné zbraně a jiná M-lock předpažbí. Grip je velice solidní drží krásně na…
This is a mount that is compatible with the magnetic rotation base that comes with tiny A9 Mini webcams that you can get for a few bucks from AliExpress. The rotation base can then be attached to the Camera Mount model created by user…
Toyota Supra A90 MK5 Keychain This keychain is inspired by the legendary Toyota Supra A90 MK5 , a modern icon of performance and style! For the best results, print with a 0.2 mm nozzle for finer detail. A must-have accessory for Supra…
Since BetaFPV recycles their V1 camera mount as a bottom plate for the V2, I decided to build a better bottom plate. I didn't like that the quadrotor can't be placed horizontally at level and that the USB port is just not accessible, no…
Printed in PETG 25% Infill 0.2mm layer hieght Some parts require supports Deburring and smoothing with dremmel necessary for slide to function (brass nuts may cause interference by pushing out material requiring filing to make clearance…
I'm really lazy with this one
Fits nicely, with two hidden screws for mounting
Price / Note stand for A9 paper. Price stand for A9 paper. Its 3,7 x 5,2 cm
A simple night mode cover for the Electrolux Pure A9 series of air purifiers. Bonus: functions as a dust cover. This should probably fit the AEG AX9 as it’s just a rebranding of the same device. It's not possible to turn off the light…
Extension of the bean hopper for coffeemaker Krups Sensation EA910B10. PETG
A much sturdier version with holding arms on both sides. Attach with a M8 bolt to the frame piece holding the cockpit. The socket I used is this: http://www.louis.de/index.php?topic=artnr_gr&artnr_gr=10032936 Category: Automotive
I ordered the Beta95X frame, hood, motors and FC stack from BetaFPV because I already had a Cadxx Vista and would like to build the Beta95X. Unfortunately the hood didn't come with suitable screws, I couldn't wait for screws to ship, so I…
print in place holder to protect the pins of FCPGA988 or socket G2 laptop cpus
Wall mount for Galaxy A9 tablet. no visible screws. use filament offcuts to lock lid in place. low profile usb edge cable required like:…
