Search results: aap

AAP 01 Hexa Barrel

Just a little hexagonal barrel for the AAP 01

Cyberpunk Lexington Airsoft AAP01

Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…

AAP 01 magwell

Flared magwell for AAP 01 Hardware: 3.5mm flathead hex screw

WE Glock / AAP-01 Magazine GBB BB Speedload Adapter

Speedload your mags fast and easy: Pull the follower down a little bit so it's easier to get the little nose from the adapter to hook it. Pull the adapter over the mag with the nose facing the bottom of the mag I like to hold the adapter…

AAP01 Magwell

Action Army AAP01 Magwell Hardware needed: 1 x M3 x 12 Flat Head Hex Screw 1 x M3 Nut

AAP-01 Suppressor 70mm

Do you like tiny suppressor like me? I present to you my little custom suppressor for the AAP-01! You can put this bad-boy on your airsoft replica with the 14mm CCW thread to have a really cool looking gun! !!!!!!! AIRSOFT ONLY !!!!!!!…

AAP-01 One Side Charging Handel Ambidextrous left / right

Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…

Airsoft AAP-01 Handguard

This is an airsoft model only, designed for an AAP-01 extending its original front part allowing a 200mm inner barrel. 2026.08.20 - Mini version extended 8mm to better fit with 130mm stock barrel Added Mid version for barrels of 160mm…

AAP 01 trigger

Adjustable blade trigger for AAP 01, should fit WE glock to. 3mm grubscrew for adjustment. Suggest to print it laying down.

AAP01 Frontend Hammerhead with tracer unit

Remixed model of Hammerhead for AAP01 to fit tracer Unit Changes: - Slightly bigger - Space for tracer unit (Acetech Brighter C or any below 28mm diameter) - 14 CCW inside for tracer - Removed bottom rail (added version with this rail) -…

AAP01 Thumb Rest

Action Army AAP01 Thumb Rest Hardware needed: 1 x M3 x 12 Flat Head Hex Screw To mount the Thumb Rest, the mounting pin of the trigger must be pushed in slightly from the right side of the firing direction, so that the pin on the left…

AAP-01 ( glock ) hpa adapter mp5

Adapter for aap-01 from Action Army. I wanted my adapter to be as easy to install as possible, and at the same time to maintain full tightness. To make the Adapter, you will need: - screw m2 - 16mm (7 pcs) - m2 nut (6 pcs) - Pneumatic…

AAP01 Cocking Handle

Action Army AAP01 Cocking Handle Hardware needed: 2 x M3 x 8 Flat Head Hex Screw

AAP-01 Black Mamba tri-rail

A tri rail module to put under the black mamba receiver for AAP 01. It doesn't block the AAP Silencer and might be compatible with a lot of picatiny accessories like flashlights, hanstops and more. It's very low profile and won't change a…

AAP01 Mag Extension

Action Army AAP01 Mag Extension With Or Without Gas Loading Hole

AAP01 Rail

Action Army AAP01 Rail Hardware needed: 2 x M3 x 8 Flat Head Hex Screw

AAP01 Hair Trigger

A redrawing from a photograph of a short-throw trigger. The main printing challenge lies in the blind recess in the center—it is best printed on supports made of special material, both the body and the separating layer as a whole.…

AAP-01 Cyberpunk 2077 M-10AF Lexington (Resin)

toy gun

Action Army AAP01 (airsoft) retractable stock

This is a remix from https://www.thingiverse.com/thing:4660187 base model to be able to support a retractable stock. I cannot find a free stock model for app-01 that is retractable that I like. So, I remix from a model that I like to fit…

AAP01 G17 lower

I spliced this together from two free models. Credit to Vietnam airsoft and @arm00700th for the STLs used. Does not work with default AAP mag release so you will need to print a glock style one such as this one…

AAP-01 TDC mod

Simple and perfectly worked tdc hop-up unit modification for your aap-01 pistol to use with heavy bb's. To install it you need: Firstly, Disassembly aap01 hop-up unit remove basic pressure and gear wheels put ‘press’ part instead of…

AAP01 smg like M4 hpa adaptor

As simple as possible hpa adaptor. Common parts and guide how to prepare magazine here https://www.printables.com/model/1239125-common-parts-for-glock-hpa This is hpa adaptor to using with m4 magazines like default smg. Tested with cyma…

AAP-01 Charging Handle for Folding Stock

For Action Army AAP-01 for use with aftermarket folding stocks. Remixed from EASY-BOT-3D and GTeck

Airsoft AAP-01 Short Barrel Adapter

My AAP-01 was too long with a silencer on, make a short barrel adapter with 14mm CCW thread to remove the stock barrel. Open to feedback and suggestions. Printed with Sunlu black ABS, 0.6mm nozzle, 0.2mm layer height, 5 parameters and 40%…

Airsoft AAP01 Upper assembly

File from GrabCad converted to STL and cleaned up: https://grabcad.com/library/aap01-upper-assembly-1 AAP01 upper parts: - Upper - Threaded External Barrel with protection cap - Rear and Front sight AAP01 bolt and nozzle parts: - BlowBack…

Airsoft magazine feet for Glock and AAP pistols

Hello, Welcome to my profile, full of models and miniatures :-) I have Airsoft magazine feet for Glock and AAP pistols for you. It is suitable for faster magazine changes in pistols and fits beautifully in the hand. It is both aesthetic…

AIRSOFT- AAP01 USW

Remix of Vietnam Airsoft's AAP01 USW kit. Tolerances of the original kit were too tight to be printed. Credit goes to Vietnam Airsoft for the original kit

AAP01 Micro Dot Mount

Action Army AAP01 Micro Dot Mount Distance Between Holes = 19 mm Hardware needed: Original Screws Of AAP01 And Micro Dot

AAP-01 Black Mamba Upper

I present to you an Upper type Black Mamba for AAP-01. It is equipped with an M3 screw slot for the TDC, a removable lower Picatinny rail, and a 14CCW thread. Type A : Designed for use with the original front and rear sights, original…

AAP 01 Criss Victor (Kriss Vector) conversion kit (With integrated silencer!) WIP

This is my first version of the Criss Victor (Kriss Vector). The main difference between this and the real one is: The placement of the mag, the placement of shooting mechanism and the stock Print Settings Printer Brand: Creality Printer:…

Airsoft AAP-01 and G-Series Magazine Lip (V3)

V3: Further compatibility fixes with BBs jamming upon entering the lip with certain mag brands V2: BBs are much less likely to "pop out" on their own. BBs are less likely to get stuck during feeding with certain 3rd party hop units The…

AAP01 under rail

This rail fits tightly to another rail if, for example, you have not enough place to insert your accessories. See the photos. I printed it with 100% infill to make it tough and it works well.

AAP01 Top Rail | JACKED ARMS

Upgrade your Action Army AAP-01 with this lightweight, 3D-printed top rail. Designed for a secure fit and easy installation, it allows you to mount optics with ease. Durable, functional, and perfect for custom builds. JACKED ARMS The…

YAAPT - Yet Another Altoid Paint Tin Insert for Watercolor Painting

This Altoid paint tray has six 2cm x 2cm x 1.4cm deep inserts for dry/solid paint blocks. Six paint brush holders 4.6mm round and a 1.1cm x 3.6cm x 1.2cm rinse/mix insert. July 23rd 2020 Update Added V2 version that is slightly narrower…

AAP 01 Buffer Stock For Airsoft

AAP 01 STOCK 1xM5 Screw 1xM5 Nut

Airsoft AAP-01 Barrel Strengthening Insert

Helps install m3 hex nuts to give mounting a rail to the stock plastic barrel more strength and integrity. Gives color too if you have a window in your barrel. Read about it, find a link to the editable tinkercad file, and find links for…

AAP-01 Outer Barrel Cover for Handguardkit

AAP-01 Outer Barrel Cover for Handguardkit I made this cover just to fit the rest of the looks. It is my first try with fusion and it is possible that it dosnt fit 100% and need to be sanded down a bit on the inside. Just try the test pit…

Airsoft Glock/AAP-01 Magazin Feet for WE and AA/KJW Type mags

!!ONLY FOR AIRSOFT!!

Airsoft Magazine Follower for Glock / AAP-01 (V3)

V3: Less likely to get stuck on the connection of 50rd magazines Flat-head magazine follower for Airsoft ONLY! Glock and AAP-01

Airsoft AAP-01 Charging Knob

A charging knob handle for the airsoft toy action army AAP-01 Part of The Creator kit by HomeGrown3d.com Read all about it here: https://www.homegrown3d.com/2022/09/20/action-army-aap-01-charging-knob/ TPU version uses hard plastic…

AAP01 Extended Mag Release

Action Army AAP01 Extended Mag Release Hardware needed: 1 x M3 x 8 Flat Head Hex Screw

AAP-01 Ghost Ring Charging Handle

I originally loved the ghost ring design I stumbled upon but really missed having the extended cocking handle, so I combined two of my favourite models to create this! (Apologies for the poor quality photos, the accessory is not currently…

glock/aap01 adapter

Tisknout z PETG, vrstva 0,2 mm Potřebné součástky: 1x pružinka z propisky (zkrácená) nebo jiná pružinka délky přibližně 10 mm 1x čep 2×22 mm Printed from PETG, 0.2 mm layers Parts needed: 1x spring from a pen (shortened) or another spring…

AAP-01 Fire Selector Plate

In case the original part breaks. Should be a drop in replacement. You might need some post processing (sandpaper) If you have issues, please contact me.

Airsoft AAP 001 Barrel

Two part barrel for the AAP 01 Happy printing and please share your make, I would love to see! :) Category: Sport & Outdoors

AAP01 holster for TTI trigger

AAP01 like default outer barrels

This is models for many common inner barrel sizes. In addition to the standard round barrel options, options with a lower and upper bar are made. And also add option to use this outerr barrel with top ris and my TDC hop up module…

AAP01 cocking handle

its model of aap01 cocking handle i recreate from ctm handle

AAP01 trigger assembly with the hammer

printable aap01 hammer and trigger assembly

AIRSOFT Mag baseplate with rail mount for AAP/Glock

Photos are of the AA compatible baseplate. Post processing probably required.

Aap01 like smg mp5 hpa adaptor

As simple as possible hpa adaptor. Common parts and guide how to prepare magazine here https://www.printables.com/model/1239125-common-parts-for-glock-hpa This is hpa adaptor to using with m4 magazines like default smg. In addition to the…

AAP-01 Stand

Stand for the AAP-01 airsoft pistol replica. A solid and simple design makes storage and display easy. Print with AMS. Printing parameters: material: PETG layer: 0.2mm infill: 20% walls: 2 nozzle 0.4mm

Action Army AAP01 Short Barrel Adapter

Action Army AAP01 Short Barrel Adapter Hardware needed: Original AAP01 Screws

AAP-01 Long Boy Barrel

Ever thought your just weren't enough out on the airsoft field? Ever thought you weren't close enough to your enemy while running with your pistol? Well with this 360mm long outer barrel you will get 275mm closer than you would with your…

AAP-01 Carbine Kit

The Dilemma (Quick story) I built my AAP01 for indoor use, unfortunately with no more indoor fields in my city, it was two options; either sell the AAP-01, or see if I can modify it for outdoor use. (check the last photo for what it…

canon custom aap01 91mm

c' est un canon externe compatible accessoir picatini inferieur type glock

AAP01 Grip Panel for ctm tac FUKU2 Nylon Frame

print with support, it's mainly for the hanging part for screw hole. or not, if you find it hard to remove, or you have unique understanding on slicers

adjustable fps value nozzle for aap01 (npas)

minimum lenght 12mm Flat Head M2x12mm you need to disassemble nozzle to adjust fps lol

YAAP Apple Picker

A fruit picker to pick fruit with a diameter less then 100 mm. If you need other measurements or want to check how i made my design you can check out the *.f3d file. Frame is screwed to a woodstick dia 24 mm lenght 1600mm . Net is done by…

Custom Outer Barrel For The AAP-01 (Work in progress)

This is a custom outer barrel designed for the AAP-01, I also included .step and .3mf files for easy remixing. No extra hardware is needed, and there is also mounting holes for the original iron sight but no mounting holes for the bottom…

Airsoft AAP-01 / G-Series hammer rollers (v1)

Refer to the images for the installation and modifying the bolt. Without bolt modification, the roller will constantly slam against the bolt wall, eventually deforming or breaking it. Suggested materials: ASA, ABS, PLA+, TPU or anything…

AAP-01 Easy opening bolt for original Folding Stock (f3d; step)

No support needed. You need one bolt M3 x 20. Please check out my other creations: https://www.printables.com/@RadekPilat/models

Spacer/short stroke kit for AAP-01

Whether you are installing this as a buffer to extend your AAP-01's lifetime or as a short-stroke kit , the installation process is the same. You can follow any YouTube tutorial for an AAP-01 short-stroke kit installation; the only…

AAP01 thread covers/flash hider muzzle device

AAP01 mag lips for APS 50 round magazine

This model is a solution for a very narrow and specific problem. My APS magazine was working inconsistently in my AAP01. Made one that's better. Tested during a 6h game in 0-5°C. Works. If you're here to convert your APS magazine to work…

picatini aap01

c' est un rail picatini pour aap 01 canon normal

H-key for aap01

This to simply as possible mode for yours aap01 pistol to use a little heavier bbs. Default hop-up rounds good only <0.3g bbs, but with this thing its rounds good 0.25-0.36g bbs. If you need to use more heavyer bbs then you should take…

aap01 lower fps nozzle value

1 mm garantee lower than 350fps at temp 30c more number value = smaller hole still in experiment 0.4 mm 358.6 fps 28c 1 mm 335 fps 28c

AAP-01 Barrel with Picatinny Rails

Ever wanted a little extra rails on your barrel? This might fix that serious problem. There is a few version. with 2 side rails with 4 rails all around the barrel both have a standard rail version and a version with longer partition…

"Luger P08 at home" AAP-01 airsoft Luger style barrel asg

Well yes. This is scuffed AAP-01 front/outer barrel thats looks like P08 Luger's. Fits well over stock inner barrel and you can mount stock front sight on it. Requires good adhesion and supports (i use Cylindric Custom Support in Cura)…

AAP-01 Magazine Catch

Keeps the magazines more sealed to the nozzle.

AAP01 Tactical KEYMOD Handguard

⚠ Note: This model is for airsoft use only. It is not intended for real firearms. Upgrade your Action Army AAP01 with this precision-engineered tactical handguard. Designed for durability and customization, this lightweight rail system…

AP7 Integral Suppressor / Amplifier AAP01

Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available. General The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the…

AAP-01 Airsoft Gun Cosmetic Accesory

This is an cosmetic accesory for the AAP-01 Airsoft pistol. u need part 1 and 2. the body and muzzle are the only ones u need. the 3rd part is for adons just print, to slide the body onto ur gun, screw off the tip of your gun and slide…

Motorcycle Key ring BRAAAP!!

A key ring designed by me for motorcycle keys.I printed my own tpu so it wouldn't leave marks on the bike. Size:92.0mmx38.0mm

Aap-01 thread cover hex design

a thread protector with a hex design for it to match the pistol grip for the aap-01

AAP-15 GBB

OPEN SAUCE FILE yall can do anything with ts aap upper lower ar-15 gbb style ref model https://grabcad.com/library/aap01-upper-assembly-1 https://grabcad.com/library/aap-01-3d-printed-grip-system-1

shaun het schaap

tekenfilm shaun het schaap

YKK Taapon ターポン

Taapon ターポン in Japanese manga ヨコハマ買い出し紀行 (Yokohama Kaidashi Kikou). This is a simplified toy-like rendition based on illustrations in the manga. No support required. Mount hole: ⌀4mm, elevation angle 25º Uses a ⌀4mm stick for the stand.

KAP-40 kit for AAP-01

Thanks to this two posts ( AAP-01 model and KAP-40 model ) made a kit of my favorite pistol. Just want to share my happiness Need a one M5*10 bolt for back part, two M3*30 for connection lower to upper, two M3*20 for connection lower…

Airsoft AAP-01 Shot Mamba

Material: PLA+ or PETG 0.2 layer 4 walls 50% infill Gyroid Post Processing: Depending on your bolt you could/should file at an angle making a bit of a chamfer at the very back where the bolt enters to make the bolt run free with no drag.…

PRAAAP / BIKEPOLO head drilling guide

I design this drill guide. The idea is to have a 6 holes equally spread and aligned on any bikepolo heads as well with the correct distance to attach the carbon connectors (Praaap ticks connectors) for carbon shafts , Stubborn alu shafts…

AAP01 Thumb Rest - right side

This is remix of model made by amazingRoyce All I did Is that I mirrored this model so It fits on right side of your aap-01. Everything else is original by the author. It took me 1 minute to do. Made for left hand users :) I can recommend…

58mm Cup Holder for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon

Modded version of 58mm cup holder for for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon. Thinner side walls

Remixed Oskait 58mm Cup Holder for Jaapps GBW mod

Oskait designed a 58mm dosing cup holder for Jaapp's Grind-By-Weight mod for Eureka Mignon coffee grinders ( https://github.com/jaapp/smart-grind-by-weight ). The github project has a two-piece dosing cup holder, Oskait designed a…

Vyper Aapter Fang CR-10

V1.9 with 3mm hole V2.0 with 4mm hole for threaded inserts M3 2.fan: cut it off or tape it made for : CR-10 FANG OEM fan duct assembly - easy & sturdy print by ozfunghi - Thingiverse should also go: CR-10/10S/Ender3 FANG for 5015 Fan -…

Stand for Alecto BC100 TIGER Slaaptrainer voor kinderen - Kinderwekker met Nachtlamp en Wekker - Tijger

Alecto BC100TIGER - Slaaptrainer voor kinderen - Kinderwekker met Nachtlamp en Wekker - Tijger Plateu. NL: Elke nacht was het raak. De tijger wekker viel van het nachtkastje op de grond. Tot Nu! Met de plateau blijft de wekker eindelijk…

AAP-01 Black Mamba holster

Requires 1 compression spring, M3x20 flat head screw and M3 threaded insert. Print with 3 walls or more (when using 0.4mm nozzle) I recommend using a lanyard with it just in case (a prototype broke in the woods and I had to search for a…

AAP-01 Anti-Loss Magwell

Prevents accidental mag drops on the AAP-01 . Requires an M2.5 screw (approximately 11mm long) for mounting (see the pictures). The slider is friction-fit, stays in place, and should be printed standing due to the chamfer.

Halo 5 Magnum (M6H2) Body Kit for AAP-01 GBB Airsoft

Halo 5 Magnum (M6H2) body kit for the AAP-01 GBB airsoft pistol. Parts: Back, Front Top, Front Bottom, Magwell. Hardware: M3 screws to lock the parts down / pin them to the Picatinny rail, plus one M3x20 screw to connect the Front to the…

LG Refrigerator AAP73792201 Door Bin

On my LG refrigerator door bin, the pegs that hold the bin into the door insert broke off. I modeled the bin and the print fits as a perfect replacement! This JUST BARELY fits on the QIDI Plus4 print bed. If your bed is smaller than…

Traditional Assamese Jaapi Decor (3-Piece Modular Assembly / Multi-Color Print)

Bring a piece of Assam's rich cultural heritage into your home with this 3D printable Assamese Jaapi (যপ / জপ) [cite: 16]! The Jaapi is a iconic traditional conical hat made of bamboo, cane, and tokou leaves, symbolizing pride, honor, and…

Eureka - MHW Bomber Catch Cup Holder - For Jaapps GBW mod

As i recently modded my Eureka Mignon Specialita, i didnt find a model the fit the MHW Bomber Catch Cup, so i made this one, with inspiration to the original model provded in the project. Mod can be found here:…

aap01/aap01c side charging handle

This remix makes your normal aap01 charging handle extended to the side about 4 inches for personal customization. (NEEDS SUPPORTS) printed at .12 layer height and 100% infill. Please leave a make or a comment, thanks.

AIRSOFT- AAP01 USW

Remix of Vietnam Airsoft's AAP01 USW kit. Tolerances of the original kit were too tight to be printed. Credit goes to Vietnam Airsoft for the original kit

LG Refrigerator AAP73792201 Door Bin

On my LG refrigerator door bin, the pegs that hold the bin into the door insert broke off. I modeled the bin and the print fits as a perfect replacement! This JUST BARELY fits on the QIDI Plus4 print bed. If your bed is smaller than…

AP7 Integral Suppressor / Amplifier AAP01

Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available. General The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the…

AAP01 trigger assembly with the hammer

printable aap01 hammer and trigger assembly

Aap-01 thread cover hex design

a thread protector with a hex design for it to match the pistol grip for the aap-01

AAP-15 GBB

OPEN SAUCE FILE yall can do anything with ts aap upper lower ar-15 gbb style ref model https://grabcad.com/library/aap01-upper-assembly-1 https://grabcad.com/library/aap-01-3d-printed-grip-system-1