Counting matching models…
You need TPU to print this beautiful one piece musical instrument. Empirically tested to be a very good way to annoy your partner! How to print: Print the holey side on the print bed. I recommend printing it with 100% infill or enough top…
Designed roughly after my Accordion / Ziehharmonika / Ziach / Quetschn / Zugin / Zugan / Rumpi / … however you call it 😅 You can print the flat version out of TPU and stick it to the wall at the position of a door handle as doorstop. Or…
This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct. The outside diameter is 169mm to allow it to be printable on most printers. I have added a second model that includes screw…
Print details Layer height: 0.2mm Infill: 25% Supports: No (except for the assembly, part 1 and part 2) Materials: Any Post processing Attach the parts using CA glue *Printed and tested on a Voron 0
Another variation of t.bone ovid/DPA microphone Intended for the left/bass side of accordion to attach the microphone to the accordion belt. Intended to use with this ebay cable organizer .
The two parts are held together by 8 6x3mm magnets. Supports will be needed for printing. Since the middle sections only have small contact areas to the bed and will tend to warp, i'd recommend using a brim.
I designed this accordion from scratch. It is pretty small but should be pretty easy to scale up. I printed parts separately and glued together. The Keys and frame are printed with filament change at appropriate levels. Print the bellows…
Hi, ich bin bei Amazon über diese Lampioneinsätze gestolpert (80mm oben und 70mm unten):…
Meet this charming little gnome, joyfully playing his accordion with a grin that’s impossible to resist. With his tall hat, bushy beard, and cheerful stance, he looks ready to brighten any room with his happy melody. Whether you place him…
My attempt at a tea holder for the “Tea Organisers” Contest. It should all fit together, but will need small dabs of glue here and there. I am still working on it to make it better, so any feedback would be very much appreciated.
I've seen some TPU ways covers done around on the internet before, but they were being printed with PLA supports; requiring either a Bambulabs HD2 printer with dual printheads, or a toolchanger printer, etc. I looked at all kinds of…
One hole like the original toy that Jaatinen based theirs off of. I also added more solid layers to the bottom to stiffen it and an additional layer for the perimeter. Layer height .18 10 solid bottom layers perimeters 2 I used TEQStone…
This is a Japanese beetle trap, designed to be reusable, without buying bug bags. It uses the wide mouth Mason jar thread for easy assembly and disassembly. It is designed to use 8mm M2.5 screws with M2.5 hex nuts. Slide a bait pack like…
There are similar models on the site, but mine is my own! It's basically the simplest way to lock accordion doors from being opened by toddlers, snack stealing guests, ghosts, etc.. It also easily slides to the left or the right so you…
I modified the base for TPU (05.10.23.)
Clockwork serenade on the accordion Category: People
UPDATE: I added a version with hooks so that the doorstop can double as an over-door double hook for hanging clothes/light bags/etc. Check the files! Do you have cats that love to get inside your closet, but it's a bifold door that the…
Hope you enjoy this flower-shaped accordion ornament! I especially like its organic appearance because it reminds me of the origami ornaments my family used when I was growing up. Printing & Assembly Tips No supports needed and fully…
Simple vase printed in spiral vase mode on a prusa mini+. Used 0.2mm layer height with pla, 5 layer bottom. Model made in Tinkercad. Usable space for plants: 88x88x103mm. Actual size 10x10x105mm.
This design represents a miniature version of an accordion that can be used as keychain. I printed it with my BambuLab P1S. I recommend to use the following build options: Layer height: 0.08mm Infill: 10-15% No supports needed Have fun…
I made new register switches for this accordion. One was completely broken, so I modeled them after the good one. The mounting bracket screwed right onto it. I printed at 100%. That was probably unnecessary, but I did it for the weight…
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
I had to slice the trim into two in order to print it on my smaller printer at the time, but the uploaded file is one piece.9. Used 8 8x3mm magnets to hold the two sides together Spacing between two trim lips is ~19mm
Do you want a wall mounted hook system that can be easily changed and modified? A simple, sleek design that utilizes a twist hook system by aiannazzone to make any version of a wall hook system you need with no visible hardware! The…
hare accordion player Заяц баянист (гармонист) Category: Decor
This is designed for the LTL Home Products HSR3680H Regent Interior Accordion Folding Door. https://www.amazon.com/dp/B00MLZKPN4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5&th=1 These are designed to be printed flat, I printed mine from…
Custom register panel switch I built for an accordion I was repairing. I could not find anything like it on the web. Please edit it to fit your specific needs. PLA+ might be too soft a material for this. So far I haven't heard of any…
Should print without supports in any material. Min thickness is about 2mm.
accordion-bayan register button Регистр для баяна россия, идеально подходит. После того, как родные регистры раскрошились при демонтаже была сделана модель по оригиналу. После этого напечатана, зашлифована, покрыта грунтом и черной…
hare accordion player Заяц баянист (гармонист) Category: Decor
nicht einfach zu drucken - bitte auf den Rücken legen! Es ist auch eine halboffene Version mit separater Rückwand dabei. Print it backwards! There's also a semi-opened version with separate back panel.
Detailed 3D printable Cute Troll Playing Accordion figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
I was tired of my cats getting into my closet, so I created a latch that closes over the knobs of the accordion doors leading into my closet. It is a friction fit and can accomodate ~140mm to 150mm gaps between knobs. Each gap for the…
Accordion belt tensioner wheel. I'm not sure of the accordion model. I searched online using photos.
This is a device that adheres magnetically to a chalkboard and with the pull of a string releases an accordion poster. It is designed to fit poster widths of ~8.1 inches or ~220mm. The back adheres to a metal based surface, such as a…
Sits on top of your accordion for easy sheet music reading when a stand is not practical or available. The hole for the button may need adjusted for your accordion. Mine sits firm, but may loosen over time. Could use some more work, but…
A 3D model of a Styrian accordion—a type of button accordion typical of Austria and southern Germany. The bellows can be opened slightly. Print it tilted backwards! It naturally looks even better in multiple colors. Print time on a…
rückwärts gedreht zu drucken, mit Stütze; gibt's auch ohne Münzschlitz als massive Version!
nach hinten gekippt zu drucken - Vorsicht mit Stützen!
Required Materials: ALL-WEATHER DUCT TAPE (1.88 inch width) SILICON TUBING (5/16" Outer Diameter, 3/16" Inner Diameter) Optional Materials: Gaffer Tape for the straps (Note: gaffer tape is not airtight enough to work well as bellows) Main…
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
Hi, ich bin bei Amazon über diese Lampioneinsätze gestolpert (80mm oben und 70mm unten):…
Custom register panel switch I built for an accordion I was repairing. I could not find anything like it on the web. Please edit it to fit your specific needs. PLA+ might be too soft a material for this. So far I haven't heard of any…
