1 / 6
Accordion Door Hangers - Repair — image 1
1 / 6

Accordion Door Hangers - Repair

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The accordion door hangers tore out of the door. This will replace the hangers using double sided foam tape.

Rating
0 / 5
Likes
4
Downloads
17
Makes
0
Views
63
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This is designed for the LTL Home Products HSR3680H Regent Interior Accordion Folding Door.

https://www.amazon.com/dp/B00MLZKPN4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5&th=1

These are designed to be printed flat, I printed mine from recycled PET with a .6 nozzle at .3 layer height.  I suggest a finer layer height so it will allow the hangers to slide more readily.  Note, the seem should be avoided around the neck of the hangers and specified to be on top.  The image below shows how I painted my seems in ORCA slicer.

With the middle hanger face down on a flat surface apply double sided foam tape.  The tape should be 1/2" (12.7mm) wide and 1" (25.4mm) long.

The middle hangers can then be applied to the door, use the hole to help center it.  If they are not centered it will bind when trying to close the door.

The end hanger should be self explanitory, you can only install it through the hole but make sure the flat side is the same as the middle hangers.

Tags