Search results: acom

Sort order

566 models

P
PrintablesKagarov

Ultracompact set CastleChess

The set includes chess pieces and a playing field. For maximum compactness, all parts are placed one inside another. This is similar to the principle of nesting dolls or stacked chairs. I did similar projects before, but here for the…

Downloads
5,553
Likes
2,101
Rating
4.94
P
Printablesnyacom

nyacom's AMD BC-250 Industrial Style Case for FlexATX (Without stock cooler modification)

Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…

Downloads
1,526
Likes
381
Rating
5

Toyota Tacoma Gas Cap Holder

This gas cap holder fits gen 3 Toyota Tacomas. I recommend printing it PETG or some other material that can survive higher temperatures. PLA will probably warp and become brittle over time.

Downloads
1,257
Likes
146
Rating
4.86
P
PrintablesMYLE

Boardgame Insert - Clank Catacombs & Expansions

Update 2026.10.28: Added a "V2" folder to make the insert compatible with the "Underworld" expansion. The challenge is to fit the small fabric bag inside without adding a lid lift. Any ideas ? ^_^ Todo: Complete the documentation. For…

Downloads
1,200
Likes
108
Rating
5
P
Printablestrstn

Travelbox and board for Ultracompact set CastleChess

This is a travel box vor the Rounded Ultracompact set CastleChess https://www.prusaprinters.org/de/prints/28518-ultracompact-set-castlechess from Kagarov https://www.prusaprinters.org/de/social/54139-kagarov/about. I uploaded the…

Downloads
794
Likes
204
Rating
4.92
P
Printablesdirtdigger

Toyota Tacoma "Taco Sauce" gas cap holder

Remix of Desert Dave's "Taco Sauce" holder for MMU2S. Intended to be printed face-down to minimize support material and purge tower height. I used Prusament Chalky Blue and jet black. It's not a perfect match for the Cavalry blue, but…

Downloads
788
Likes
134
Rating
4.2
P
PrintablesOstella3D

Yeti 14 oz Rambler Adapter for 2017 Toyota Tacoma Center Console Middle Cup Holder

A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…

Downloads
771
Likes
120
Rating
5
P
PrintablesTruTech

2nd Generation Toyota Tacoma Gas Cap Holder

Modified to fit 2nd gen tacoma. slide in the tab on the right side first to get a firm hold and then use the screw to secure it in place.

Downloads
746
Likes
66
Rating
5
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Gas Cap Holder

You should print in PETG just for heat/durability purposes. There are two versions one that just slides in (minimal) then another that utilizes the screw hole and can be mounted via Toyotas screw (no drilling or modification needed).

Downloads
713
Likes
80
Rating
5
P
Printablesscarrson

Toyota Tacoma Hard Hat Hooks

Note: a revised overkill version exists now: Original model: Includes a model for the front and rear seats. EDIT: Sep. 8, 2024 - Added a “rear middle seat” hanger with enough droop to reach under the middle seat head rest. Headrest peg…

Downloads
628
Likes
106
Rating
5
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Glare Blockers

I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…

Downloads
586
Likes
98
Rating
5
P
PrintablesTheKwijibo

Toyota Tacoma Manual Shift Knob

My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a…

Downloads
571
Likes
32
Rating
4.75
P
PrintablesDesertdave

Toyota Tacoma "Taco Sauce" Gas Cap Holder

Do you fill your Tacoma with petrol or Taco Sauce. Well? Tell the world!

Downloads
548
Likes
68
Rating
5
P
Printablesnyacom

nyacom's AMD BC-250 Industrial Style Case (Without stock cooler modification)

Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…

Downloads
548
Likes
161
Rating
5
P
PrintablesDadudos

Angled stand for SMALL drawing tablet One by Wacom

This tablet stand was designed to improve the ergonomics of the Wacom One. (for me it works) Has a place to put the stylus. 3mf file included. Only things different than stock .3mm profile is 1 less top layer and 10% infill with a three…

Downloads
526
Likes
78
Rating
5
P
PrintablesKnurbine

Toyota Gen 1 Hilux/Tacoma/4Runner/T100 Dash Switch Cover

This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…

Downloads
512
Likes
67
Rating
0
P
PrintablesTruTech

Toyota Tacoma Cup holder

The front cup holder uses a smaller rubber holder that get stuck on bigger cups. Made a larger cup holder. I made this one big enough to fit Stanley, Yeti, Corckcicle and other larger bottles and mugs. The insert can shrink the hole size…

Downloads
476
Likes
78
Rating
0
P
PrintablesMrBaconCat

3rd-Gen Tacoma Badges

Badges for a 3rd-Gen Toyota Tacoma. TACOMA, SR5, and V6 emblems are already sized and ready to print. I made these models because I want to print them in black ABS, because I can only find chrome badges for sale, and the OEM Badges I…

Downloads
469
Likes
48
Rating
5
P
Printablesvidision

iPhone Charger Pad for Toyota Tacoma (15W Magsafe Charger)

Matches the shape of the OEM phone cubby. To install: Print as you like. Put the 15W magsafe charger in position. The 25W will not currently fit this model. Press the cord into place on the back, minding the bends. If taping, place 1-3…

Downloads
457
Likes
34
Rating
5
P
Printablesdanny520

Print in Place Toyota Tacoma

2016-2023 3rd gen Toyota Tacoma TRD Pro.

Downloads
420
Likes
56
Rating
5
P
PrintablesGerald Hamster

Tacoma Gen3 Center Console Organizer

Print it upside down so you don’t need any supports, I just kept it right side up for the picture. I printed it in Pa6-CF at 20% gyroid infill. I didn't do PLA because I have heard that PLA melts and warps in hot vehicles overtime. About…

Downloads
417
Likes
59
Rating
4.75
P
PrintablesPatrickWL

Toyota Tacoma 2nd Gen (2005-2011) Grille Emblem

Replacement Toyota emblem for a 2nd generation (2005-2011) Tacoma. The back "fill" piece has two slots built in for cable ties to pass through to secure to the grille. I have included a 1 piece file which you can do a layer change on for…

Downloads
415
Likes
28
Rating
0
P
PrintablesSatorlith

Rangement pour 12 clés FACOM / 12 wrechs holder

I remixed a 12 wrench keys holder to cleanup my toolbox. Based on https://www.thingiverse.com/thing:3603899 where I removed a part to fit Facom keys. J'ai remixé un design de support pour 12 clé plates afin de ranger ma boite à outils.…

Downloads
408
Likes
40
Rating
5
P
PrintablesPeterJ

Toyota Tacoma (95-04) 4Runner (89-02) Grill Clip

This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…

Downloads
405
Likes
61
Rating
4.67
P
PrintablesDeepanshu Verma

Wacom stylus body for samsung galaxy tab s8/s9/s10 spen

You might wanna scale the size in the slicer a bit. For me 103-104% scale worked fine. 0.2mm quality layer height 20% infill Grid support on bed Brim

Downloads
403
Likes
46
Rating
4.67
P
Printablesjustctrl

Toyota Tacoma center console tray

Note that this will fit 2024+ Tacomas only! The Tacoma has a lot of space in its center console, but it's deep relative to its width; a tray insert makes it a lot more usable. You could buy a similar part, but why buy when you can print?…

Downloads
377
Likes
44
Rating
3
P
PrintablesJpg90
18+

The source marked this model as adult content.

Downloads
374
Likes
43
Rating
4
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Molle Panel

There are two versions, one that can be screwed in or another without holes that you could maybe use 3M tape.

Downloads
373
Likes
102
Rating
5
P
PrintablesEli Jeffers

Toyota Tacoma Belt

I designed this because I i use my truck around the farm and don't want to wear my seatbelt when driving low speeds and when I'm in and out of the truck, Tested with 3rd gen Tacoma only. THIS WAS NOT MADE TO OVERRIDE THE SAFTY FEATURES IN…

Downloads
357
Likes
44
Rating
0
P
PrintablesColin.G

Wacom Intuos Pen Stand

Stand designed for the pen that came with the Wacom Intuos CTL490 graphics tablet.

Downloads
350
Likes
40
Rating
4.75
P
PrintablesJoe Kaiser

Tacoma Bed Hook

This is a simple bed hook that fits the 3rdGen Tacoma stock bed rails. Twist it 90*, insert it into the rail and rotate it up. It should be tight enough that it doesn't slide around. I printed it with 6 walls and 25% infill. That may be…

Downloads
349
Likes
73
Rating
0
P
PrintablesTacoDan

Tacoma HAM Radio Mount

Hi all! I created this UV5R Radio mount for my 2010 Toyota Tacoma TRD Off-Road. I printed it face down without any issues. It is designed to be used with the belt clip provided with your radio. I added 3M automotive mounting tape to the…

Downloads
340
Likes
89
Rating
5
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Cubby Drawer

Fits into the empty slot on the driver side and serves as a nice little drawer

Downloads
323
Likes
57
Rating
5
P
PrintablesDalankar

Warcry Catacombs Terrain Set

Ready to expand your Warcry games to the Catacombs game mode that pits your Warbands against one another in a cramped & deadly dungeon? Use this terrain set to get you there! All the parts have been designed to be compatible with a…

Downloads
299
Likes
60
Rating
5
P
PrintablesUncle Jessy

Chick-Fil-A Sauce Holder - Toyota Tacoma

This is a remix of Maker__Guy's awesome Chick-Fil-A Cup Holder. I made this for my Toyota Tacoma and the little rectangle holder. I modified this in TinkerCAD and printed in PETG on the Raise3D N2+ Full video is available here to see it…

Downloads
294
Likes
124
Rating
5
P
PrintablesOwen S

Toyota Tacoma 05-15 Bed Side compartment NRS Strap or tool Holder

This design replaces the smaller side compartment on Toyota Tacoma 2005-2015 models. This model includes a latching door mechanism based off of the latches on the two larger side hatches in the bed and off of @AP_81926 original model for…

Downloads
287
Likes
81
Rating
5
P
PrintablesPrinterGuy74

1995 to 2004 Toyota Tacoma Door Handles

One of the few negatives of first gen Tacomas are their door handles which are known to crack. Some of the non-OEM handles are made out of a materiel that does not hold up in freezing temperatures. After snapping a handle this winter I…

Downloads
280
Likes
30
Rating
0
P
PrintablesGhiaKarmann

4th generation Tacoma/6th gen 4Runner BIG cup holder MOLLE panel

Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…

Downloads
279
Likes
29
Rating
5
P
PrintablesSoulta

GPS Antenna Collar-Clip for Tracker/Garmin/Ultracom

This is meant to be a replacement fr the Antenna clip that is usually shipped with Collarmounted Dog tracking GPS (i.e. Tracker, Garmin or Ultracom Collars). Since they usually break early in the products life i decided to print a sturdy…

Downloads
272
Likes
8
Rating
0
P

Toyota Switch Blank Bic Lighter Holder (1st Gen Tacoma, 3rd Gen 4Runner & more)

This will fit in the switch blank locations on many early Toyota models including the 1st Gen Tacoma, 3rd Gen 4Runner, and Toyota Pickups (plus others). Fits one standard size Bic lighter.

Downloads
270
Likes
21
Rating
5
P
PrintablesDenis

Hotwheels Tacoma 3D Scan

A very rough 3D Scan of a Hot Wheels Tacoma. Feel free to remix it to make it better

Downloads
263
Likes
32
Rating
5
P
Printables8bitmcu

1:16 Toyota Tacoma RC

1:16 Toyota Tacoma This is the second model I scale down to 1:16. This model is a lot harder to print and assemble then the 1:16 80's Dodge RAM , but has a lot more to offer! It is assembled with common M3 hardware, has a working hood…

Downloads
261
Likes
81
Rating
0
P
PrintablesSadra Shariaty

David pen holder (Xp_pen&Wacom)

I combined two models of a pen holder and David's head scan and then sculpted the details. Note that the model should not exceed 135 mm height (Z axis) or the pen doesn't fit. I used supports for my own print. I used 0.1 layer height with…

Downloads
257
Likes
50
Rating
5
P
PrintablesKraft3D

SOPORTE LÁPIZ WACOM INTUOS / WACOM INTUOS PEN HOLDER (UPDATED)

Update 02/07/2025 New remix avaiable: Stand for tablet and pencil Update 19/11/2024 Step file has been added. Feel free to make your remix. Uptaded 17/07/2024 Notes: The print time has been significantly improved. Now you only need one…

Downloads
255
Likes
41
Rating
4.75
P
PrintablesJarrod Berry

2024 Tacoma Mag Safe (15w) Charger

This is a Remix of a Mag Safe Charger for a 2024 Tacoma. 3D Print Face down with no supports needed. PETG or ABS/ASA recommended to prevent melting in the Truck. The Mag Safe charger wire can be hidden in the print. Use alien tape in the…

Downloads
251
Likes
21
Rating
5
P
PrintablesSalamandar

Giacomini Clip Clap adapter to M30×1.5

This is an import and model fix from https://www.thingiverse.com/thing:4677101 . I just printed it for my radiator and my Moes radiator thermostat. Print Settings: Material: PETG / ABS (PLA might be too hard, it should bend a little)…

Downloads
250
Likes
15
Rating
5
P
PrintablesTheWhiteCliffs

3rd Gen Tacoma Door Inserts

These are made to be pressed into the gap on the inside door handle. Print this in TPU! If you print it in any hard filament it likely will not fit! It's designed to be a tight fit that the TPU can squeeze into. Occasionally they may…

Downloads
250
Likes
50
Rating
5
P
PrintablesPatrickWL

Toyota Tacoma ARB Safari Snorkel Cover

Remix scaled to 115% and the long edges flared to fit the profile of the ARB Safari snorkel for the 2005-2015 2nd generation Tacoma (part no. SS171HP ) Category: Automotive

Downloads
248
Likes
25
Rating
5
P
PrintablesTeo_211

Toyota Tacoma Wall Art

Toyota Tacoma Lunar Rock Wall Art Silhouette model. Adjustable size.

Downloads
247
Likes
44
Rating
5
P
Printablesgleb_sexy

Wacom Pen Holder

Check out the updated redesigned version here: Printed on Creality K1 in 15 minutes with Eryone matte black PLA. Walls are 1.5mm thick so it is quite light, I recommend adding something heavy on the inside and then glueing something like…

Downloads
246
Likes
43
Rating
4.75
P
Printablesscarrson

Toyota Tacoma Shovel Holder

I got tired of my snow shovel sliding around the bed, so made some simple hangers to mount the shovel to the OEM strut rails. Includes two (2) types of strut blocks: T-Slot Block = Most secure, but must slide in the whole way. If you have…

Downloads
244
Likes
79
Rating
0
P
PrintablesWallK

Kagarov's Ultracompact set CastleChess Clip

This is a thin and very fast to print clip to hold chess pieces together Get models for this chess set here: https://www.prusaprinters.org/prints/28518-ultracompact-set-castlechess Print with brim, it should easily tear off

Downloads
241
Likes
53
Rating
5
P
PrintablesTim Bradley

Tacoma (3rd Gen) Cup Holder Adapter for Yeti

Tacoma (3rd Gen) Cup Holder Adapter for Yeti

Downloads
240
Likes
21
Rating
5
P
PrintablesCrooksUSA

2005 Toyota Tacoma 5 speed manual shift knob - FIXED slicing issues

Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…

Downloads
236
Likes
20
Rating
4
P
PrintablesAshyr

4th Gen Toyota Tacoma Glove Box Drawers and Shorter Divider for JKCover Glove Box Organizer

I have a 3rd Gen Toyota Tacoma that also has a glove box organizer by JDMCAR that uses Joshua Dennis' Toyota Tacoma Glove Box Drawers . My dad recently got a 2024 Toyota Tacoma and purchased a JKCOVER Glove Box Organizer . He liked my…

Downloads
234
Likes
51
Rating
3.5
P

Toyota Tacoma Center Console Latch

My wife's 2010 Toyota Tacoma center console latch broke (the little pieces that hold it in snapped off), so I took the part, some calipers, and sat down at my computer to CAD up a new one! Took a few iterations, but the resultant part…

Downloads
234
Likes
40
Rating
0
P
Printablesar3Dprints

3rd Gen Toyota Tacoma

Thank you all for the downloads and likes, will continue to post more designs :)

Downloads
233
Likes
50
Rating
0
P
PrintablesKev

2nd Gen Tacoma A/C control knobs

Press fit together can put drop of glue on the inside if needed. They are staying for me without any glue. Used clear filament for the selector. Must use the metal sleeve from factory selectors, used a little pick to work them out.

Downloads
230
Likes
20
Rating
0
P
PrintablesG

Giacomini Adapter

Adapter for Giacomini radiator valves so a standard M30 thermostatic valve head can be fitted. Measurements taken from an existing adapter. This replica is untested.

Downloads
229
Likes
6
Rating
0
P
PrintablesMakeRepair44

FACOM PL.271 Plateau

Pièce de remplacement pour coffret cliquet Facom 1/4 R.151/ Replacement part for Facom ratchet set 1/4 R.151 Category: Replacement Parts

Downloads
226
Likes
13
Rating
5

Digital Pen Case. Military Style. Wacom

-Material: ~ 30 gm -Printing time: ~ 5 hrs -Recommended quality: 0.2 mm -Dimensions: 156 x 62 x 13 mm If you like my work, don't forget to buy me a coffee ☕ You can also follow me on my social networks: Linktree: https://linktr.ee/Alitaria

Downloads
224
Likes
43
Rating
4
P
PrintablesRESTLESS DESIGN

Wacom Intuos M Pen Holder

This is a simple to print, yet good looking stand for the pan that comes with the Wacom Intuos M drawing tablet. Depending on the dimensional accuracy of your printer, it might be necessary to scale the print up a bit. Support If you'd…

Downloads
222
Likes
31
Rating
4.83
P
PrintablesPatrickWL

2nd Gen Tacoma 4.0 Oil Fill Funnel Adapter

Thread in adapter and funnel for the 4.0 2nd Gen Tacoma Funnel is from https://www.thingiverse.com/thing:980665/files Category: Automotive

Downloads
218
Likes
48
Rating
5
P
PrintablesMeuon

Toyota Tacoma/Tundra (and others) Key Fob Case

My OEM key fob broke, turned into a good FreeCad lesson (file included). Simple rugged design, prints well as 1 piece, trim the sprue and assemble with 2 M3 wood/plastic screws.

Downloads
212
Likes
28
Rating
5
P
PrintablesJC Wollslager

Clank! Catacombs - Magnetic Tile Holder and Insert

For the record, this was my first attempt at making something like this and it shows. Files are all pretty self-descriptive, and I didn't really do anything specific with settings. If you do want to put this together for some god awful…

Downloads
207
Likes
24
Rating
0
P
PrintablesGhiaKarmann

Toyota Tacoma (4th generation) bed top rail shim (for use with Deck Rails in original factory location)

The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap…

Downloads
203
Likes
23
Rating
5
P
Printablesalexberkowitz

Wacom Intuos Drawing Tablet Wall Mount

A simple wall mount for a Wacom Intuos 7.9" x 6.3" (or other similarly sized) drawing tablet. Can be used for wired or wireless versions. Prints easily without supports. Post-Printing Glue the two pieces together as shown, with the tab on…

Downloads
203
Likes
54
Rating
5

Toyota Tacoma Truck Bed Rail T-Clip

This model was developed with the purpose of creating a modular system that can be used to mount things on the truck bed rails of a 3rd gen Toyota Tacoma. Developed in association with LineArcLine, the system features a T-clip system that…

Downloads
200
Likes
49
Rating
0
P
PrintablesBrian Acton

Toyota Tacoma (Gen 3) Reverse camera mount

A mount relocation for people looking to mount the gen 3 Tacoma camera to a flat panel

Downloads
197
Likes
23
Rating
0
P
PrintablesFouinou45

Facom nano tool holder

****************************************************************************************** Update 14/06/2026 : add 2 size for the main part, hex bit is 6.35mm face to face (caliper) small : 6.495mm medium : 6.582mm large : 6.668mm Print a…

Downloads
193
Likes
16
Rating
0
P
PrintablesZac Reinke

Taco Hitch Cover | Toyota Tacoma

A taco hitch cover for your Taco

Downloads
192
Likes
56
Rating
5
P
PrintablesRamirez62463

Tacoma Tailgate Bushing

This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.

Downloads
191
Likes
8
Rating
0
P
PrintablesAlanBCM

Toyota Tacoma TRD Pro 2016-2023 Grille Letters

Description Replacement grille letters designed for most 2016–2023 Toyota Tacoma TRD Pro–style grilles. These letters were modeled as a functional replacement for the OEM grille lettering. To make them easier to print, I left out the…

Downloads
187
Likes
19
Rating
5
P
PrintablesLordOgreCorsair

Dungeon stick sewers and catacombs

Some dungeon stick sewers/catacombs Print Settings Printer: Kossel Delta Rafts: No Supports: No Resolution: 0.3mm Infill: 25% Filament: Bilby3D ABS Translucent Category: Models

Downloads
183
Likes
43
Rating
0
P
PrintablesDeniz Gulsoy

Toyota Gen 1 Hilux/Tacoma/4Runner/T100 Dash Switch Cover

This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…

Downloads
183
Likes
24
Rating
5
P
PrintablesJosh Smith

2nd Gen Toyota Tacoma Switch Cover

These models can be used to replace the switch covers located below the radio unit. There are a few variations: Blank Press fit USB (may require super glue) Microphone (using standard aftermarket radio microphones)

Downloads
182
Likes
27
Rating
0
P
Printablespatrickzell

Wacom Intuos Medium (M) under desk brackets / Untertischhalterung

Untertischhalterung passend für ein Wacom Intuos Medium Grafiktablett. Keine Stützstruktur notwendig. Verkürzte Druckzeit. Underdesk mount suitable for a Wacom Intuos Medium graphics tablet. No supports needed. Shorter printtime.

Downloads
179
Likes
27
Rating
5
P
Printablesrtarbutton

3rd Gen Toyota Tacoma Phone Holder

There are two sizes to accommodate thinner thicker phone cases. I am more than happy to make variations for whatever size you need! STEP file also available for your editing needs! Print in ASA, ABS, or PETG. Needs to withstand heat and…

Downloads
176
Likes
39
Rating
0
P
Printablesfetchbeer

Wacom Stylus Grip

An absolutely massive grip replacement for wacom grip or pro pens (mine is years old so I'm not sure how much they've changed) Just disassemble the grip of your stylus and slide this piece over and put everything back on. If it sticks I…

Downloads
175
Likes
39
Rating
5
P
PrintablesWilsonIdaho

3rd Gen Toyota Tacoma triple switch plate

Triple switch plate for the cubby to the left of the steering wheel. Fits the tall Toyota push button switches. Category: Automotive

Downloads
173
Likes
46
Rating
0
P
PrintablesMr Practical

Tacoma and Tundra Bed Rail Eye Hook

Eye hook for 3rd Gen Tacoma. This is a very tight friction fit clip for Gen 3 Tacoma bed rails. The hole is not super huge but should allow for most netting clips and bungee chord. 6 walls and 20% infill is recommended.

Downloads
171
Likes
37
Rating
5
P
PrintablesBlowtorch

Toyota Tacoma 18'-20' radio knobs

Replacement knobs for the Toyota Tacoma 2018-2020, 3rd gen

Downloads
168
Likes
10
Rating
5
P
PrintablesGuvner76

Ultracompact CR-10 Standalone Project - Control Housing

I picked up a CR-10 V1 and wanted a few upgrades and to get rid of the original control box. I tried a few different standalone projects, didn’t find one that I really liked, or that needed excessive modifications. I decided to build my…

Downloads
167
Likes
20
Rating
0
P
PrintablesShaunmull

Wacom Cintiq 16 Remote Holder

Created a holder that slots into the side (left or right) of the Wacom Cintiq 16 for use with the Wacom remote. Lower cut-out to access the power on button, the remote fits securely within the holder to prevent moving around during use.…

Downloads
167
Likes
21
Rating
0
P
PrintablesDanAndersen

Stand for a Wacom One Pen Tablet (to be used as a second display or storage)

Wacom One PenTablet as Display The Wacom One is a Pentablet / drawing tablet which supports of a 13.3 inch fullhd display, similar to the professional Wacom Cintiq tablets. The connection of Tablet is HDMI in and USB (for Power and…

Downloads
163
Likes
15
Rating
5
P
PrintablesRaylo

Toyota Tacoma (and other models) 1.75" tweeter adapter

This is a pair of mounting adapters (driver and passenger side) for Toyota vehicles designed to accept tweeters with 1.75" diameters like the Focal in the picture. They typically mount in the upper front doors. The tweeters snap in with a…

Downloads
163
Likes
25
Rating
0
P
Printablesdryals

1st gen Toyota Tacoma bench seat cup holder

Cup holder I made after printing a model from Pahls_racing ( https://www.thingiverse.com/thing:4051379 ) that didn't fit in my Tacoma. I made one hole big enough to hold a 30oz Yeti cup and the other to fit a water bottle or aluminum can.…

Downloads
163
Likes
23
Rating
5
P
PrintablesDave K

2013 Toyota Tacoma Cell Phone Mount

I didn't like any of the existing dash mounts for my cell phone, they all looked big and bulky sitting on the dash or in a cup holder. I designed this to follow the lines of my 2013 Tacoma dash. It use the RAM mount ¼ ball system, along…

Downloads
162
Likes
30
Rating
5
P
Printablesjimmiedave

Gen 3 Toyota Tacoma Gas Door Cap Holder with Cap Thread

I printed philthyfool's design, and it's nice, but the cap kept dropping out of it. I wanted a screw thread for positive retention, so I re-built it in Fusion 360, and added a screw thread (45mm outside diameter, 41mm inside diameter, 7mm…

Downloads
162
Likes
19
Rating
5
P
PrintablesJayPotter1969

3rd Gen Tacoma Mic Mount

I decided to remix this because I wanted to use my CB Style Mic for my Midlands GMRS radio in my tacoma. Print Settings Printer Brand: Creality Printer: CR-6 SE Rafts: No Supports: Yes Resolution: .2 Infill: 25 Filament: Overture PETG…

Downloads
160
Likes
19
Rating
0
P
PrintablesIsaac Diggs

Pencil Lead/Pen Nib for Wacom ONE | NO PRINT NEEDED

Use your leftover Filament for a replacement for the Wacom Tablet (Wacom One CTL-672) Pen nibs. To be clear... YOU DON'T NEED A 3D PRINTER (I just attached a sliced gcode and a STL because it's needed for the "last meter contest") You…

Downloads
159
Likes
94
Rating
4.67
P
Printablesar3Dprints

3rd Gen Toyota Tacoma Side

Like my front end version here is the 3rd gen taco keychain or not!

Downloads
159
Likes
38
Rating
5
P
Printablessimthembile

Clank! Catacombs Board Game Insert with "Adventuring Party" and "Lairs and Lost Chambers" Expansions

Print 2 each of the Player Decks and Player Tray files. Player Trays are stacked 3 on top of 3 with the cutouts on each row designed to hold 3 of the character boards. The “backfill” pieces serve to fill the remaining space and have a…

Downloads
158
Likes
29
Rating
0
P
Printablesvidision

Trim for 4th Gen 2024-2025 Toyota Tacoma Climate and Drive Control Knobs

Heads up: the knobs look the same size, but the drive knob is smaller by a hair! Choose your filament and layer height to match your desired end quality. The bottom of each trim ring has tiny retention tabs. When installed the trim rings…

Downloads
156
Likes
33
Rating
0
P
PrintablesKagarov

Ultracompact set ChessCylinder

The set includes chess pieces and a playing field. For compactness, the parts are placed inside one another. This is similar to the principle of nesting dolls. I made holes with recognizable images of chess pieces; if you like, you can…

Downloads
155
Likes
51
Rating
5
P
PrintablesCptAmerica

3rd gen Toyota Tacoma Blue Sea Systems fuse block and breaker mount

Fits 3rd generation Toyota Tacoma in the engine bay right next to the existing fuse box. This was designed for the Blue Sea Systems 6 circuit ST Blade ATO/ATC Fuse Block and 187 Series Panel Mount circuit breaker. MUST be printed with ABS…

Downloads
154
Likes
37
Rating
5
P
Printablesbosr

Wall Supports for Facom Screwdrivers collection (parametric) - Support muraux pour tournevis Facom

This sturdy model will nicely display your Facom screwdrivers, without much filament. Feel free to change the dimensions in the provided FreeCAD file. That's what I did to create the one for my Dexter Torx screwdrivers (see photo).…

Downloads
154
Likes
19
Rating
0
P
PrintablesMike

Clank! Catacombs inc Lairs Expansion Insert

I just made two tiny changes to NoahColly's original design. You will replace the two small spacers with a smaller one and an additional smaller card holder.

Downloads
146
Likes
9
Rating
5
P
PrintablesTiskoviny.EU

Giacomini Valve Heater Adaptor

EN: Giacomini Valve Heater Adaptor Giacomini valve adapter for standard M30 x 1.5 mm thread for programmable radiator thermostat. The model was thrown and tested with a LIDL SilverCrest RT2000 thermostatic head. Due to temperature…

Downloads
145
Likes
9
Rating
5
P
PrintablesSamAlfano

Toyota Tacoma radio button cover 3rd gen

The radio buttons on 3rd gen Toyota Tacoma are smooth, small, and difficult to quickly access when driving. This press-on knurled button cover simply presses onto the existing button to provide a larger and and easier-to-grip knob. No…

Downloads
141
Likes
18
Rating
0