Counting matching models…
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
This version of the fidget spiral cone, spinner spiral, or what you might call it, demonstrates how you can design one yourself! We are working behind the screens to perfect the explanation and instruction on how to design your own…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
Here is a very parametric and ✨ now Configured ✨ Gridfinity Base Grid and Bin Fusion 360 file with 3MF's. I'll keep adding and updating as we develop new items. See our collection . Now Standard 3MF Files – Rev 2 14 Oct 2023 All F3D and…
This simple attachement will let your Benchy float in less than an hour of printing time! I printed mine with NO INFILL , and i recommend using tree supports , they are very easy to remove. Please make sure to check out my other benchy…
Holds 4 full-size SD cards in a 1x1 Gridfinity square. Awesomeness: Holes are 2CM deep (SD cards are 3CM) so even if you bump it, they won't go flying all over the place Holes are offset, creating a 1CM gap for your fat fingers to go…
check out the video of these tuners: The purpose of 3D printing guitar tuners is mostly for DIY musical instruments and also someday I will design a guitar that is 100% 3D printed. In addition they can be used as replacement parts on an…
As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…
*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…
Pretty much made this: https://www.printables.com/model/1102040-extension-cord-holder-parametric It claims to be parametric, but there are no parameters to change! The screw holes are positioned a bit differently in this design and I…
So I decided to add some extrudes and cuts on the amazing original models made by CAD-Guy as these would slip and fall. This remix is easier to print and the extrudes allow for the crates to actually be stackable. Can be printed with 0.3…
The original PDXCNC parametric project had base sizes that didn't follow the specification. This corrects those errors.
An actually working Y splitter for Bambulab printers to be used to allow AMS and manual feeding without PTFE tubes switching NOTICE: Must follow instructions: This should be printed in 0.1 layer height !! Connect as follows: A - AMS | M -…
A soldering tip cleaner with an actually sturdy base and large footprint
I uploaded this model so other people don't have to waste an hour printing just to find out that it doesn't fit at all. I tested it as shown in pics. Works 100% with WMVos 's side mount:…
The One Ring from Lord Of The Rings - There are some nice versions to be found, but I wanted to share my favourite. Use a raft on the print for extra adhesion. A succcesful print will result in 3 rings of different sizes. One print fits…
Funny Sign - "When a woman says "Correct me if I'm wrong", do not under any circumstances actually do it.", multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs see my (growing) collection…
Use supports for "mag" file, use 8 loops of walls for spring file, the rest is pretty standard. Correct printing orientation is shown in photo. Assemble using two, long M3 bolts, no need for lower nut. Happy shooting!
print in pla i printed in 0.28 layer height cuz i needed it fast but it ended up good overall on my bambu lab a1. the pins need to be glued to the handles then cut. print the handles and pins vertically for best result. what i did is i…
This is a remake of very clever design of https://www.thingiverse.com/thing:6474490 I had to remodel it from scratch to allow it to fit real V-mount accessories, since original design is too tall. You still need the backplate from the…
look at the original model for all of the info
I don't know about you, but most of the passthrough models I find to print are not toleranced well. Look no more! These are toleranced to print with no additional settings and work off the print bed!! Please post makes! Suggested layer…
UPDATE Nov 8, 2022: I added a new v2 of the rod holder, based on a clever suggestion by (thingiverse user) @Klober81, which reduces the needed length of metal rods from 12.5" to 12", which saves on purchase cost of metal rods when one…
I wanted to convert my stryfe to half darts, but couldn't find a pusher that I liked, so I made my own! Some notes: Not compatible with unmodified daybreak cages, since their dart guide interferes with extended pushers. You can fix that…
Version 2: Fan duct overhaul providing much greater airflow, now it actually blows air instead of just spinning, and fully spins on any speed in stock firmware. Size increased a bit. You can now replace the 4010 blower fan with a 4020…
The parent design had odd sized (20.26) X, Y, and a smaller Z axis. This should be precisely 20 on each side so you actually are calibrating. Thanks to original designer for the rounded edges, it does permit better measuring accuracy.…
Rationale: I found a couple of hooks here but they were fully round and unprintable because of too low contact area with the printer bed. OR, they didn't state their dimensions and I could not immediately see if they were useable or not.…
Thumb stick extenders for the PS4 DualShock 4 controller, available in three different height options. Surprisingly comfortable. ATTENTION! Be careful when putting on, or else you may tear the rubber on the tumbstick.
Files are provided for 3 different size pots, and also the FreeCAD model if you want more pot or different size. Note that I did not try to make the model easy to instantiate with other dimension, but copying the third pot and modifying…
this is a race car that both looks like an actual race car and it can also “drive” if you push it or send it downhill! like an off-brand Hotwheels! to assemble first put the cylinders in the main body's two holes, then put a small circle…
I wanted a simple, small chalk holder, but collet-style mechanisms are just unsuitable for printing in plastic unless they're comically oversized. I did try this model: https://www.thingiverse.com/make:1205539 ... but it was larger than I…
This is a benchy that floats, so it's a great test print as well as a toy to give away.
Maple seeds remind me of the fall, as they literally fall during the Fall. There are none near me, so why not print it! video of drop test #2: video of drop test: After searching online and finding a few existing designs to print, none…
The typical 'test cubes' are generally worthless for calibrating dimensional accuracy as they are not only way to small but also have sharp corners which make any measurement you can get from them tenous at best due to corner…
Edited on Fusion 360 to upgrade a Prusa MK2S to use the MK3S+ Parts but with a better hotend than the E3D V6
Initial Model shows nice picture with 2024, but stl has no numbers in it.
This model adds the hidden momentary button to remix of ttt - gate7_1_6x2 Magnets Power model which begins the dialing sequence in Spradlinb's youtube video. UPDATE this design uses two 6x2.75 disc magnet using (6.2x2.8) and reducing the…
I used MeshMixer to add a third eye an existing crow model. Aside from my confusion about crows vs ravens, it was intended to be The Game of Thrones Three Eyed Raven that Bran uses Greensight to share his vision with. You can see in the…
Tired of threading your filament through those tiny spool holes? Sick of filament clips constantly falling off or coming undone from your Bambu or cardboard spool? This robust, secure filament clip will solve all your problems. Quick to…
An actually working Y splitter for Bambulab printers to be used to allow AMS and manual feeding without PTFE tubes switching Print the Joiner and the adaptor. make sure to add support on the joiner only where it is needed (i.e. the…
Use this to secure hooks and such to a pegboard. Updated design that actually works….
For the longest time I couldn't figure out how to get first layers with invisible extrusion lines like how they are on the Prusa factory printed LCD covers. I don't know if this is how they do it, but this is what worked for me and…
Insert for the Deep Sea Adventure game with cutouts sized to actually fit the game pieces.
Radius gages you can “actually” use. Great for reverse engineering parts. These are in .125" radius increments. Used standard PLA Matte filament. Approximately 1/8" thickness.
Home Depot sells this stretch wrap: https://www.homedepot.com/p/Pratt-Retail-Specialties-5-in-x-1000-ft-Stretch-Wrap-5005001/202029371 Pratt Retail Specialties 5" x 1000' It's fine and relatively inexpensive, but the handle is deeply…
There are also blank covers in files! Made this in Fusion 360 a while ago. Needed: a bit of glue! You can add your own text in Fusion 360 or new (not officially released yet) version of Prusaslicer. Warning: !Not yet printed or tested!…
The year is 2024, I was perusing the vast quantity of various phone stands online. I printed 2 or 3, and ALL of them were TERRIBLE for my phone for various reasons. It turns out, phones have evolved quite a bit since 2012, and phones are…
The system is based on a double helical focuser like this: High Precision 1.25" Double Helical Focuser with Brass Compression Ring M42 T2 SCT Thread 2" Adapter for Astronomical Telescope…
A business card that includes many different tools and is also the size of a regular credit card, so it will fit in your wallet. Includes: ruler protractor bottle opener M2, M3, M4, M5, M6, M8, M10 hex wrench holes flathead screwdriver…
remodelled and remixed for a perfect fit in the Huntsman
Simple D8 that functions as a D4 so you can actually pick it up.
3 walls 15% infill is sufficient
Not much to say, Just cable guides that are large enough to actually run some cable through. UPDATE: I added covers to make the guides line up better. Much Wow! UPDATE: I revised the 20x40 cover so it grips better in place. UPDATE: I…
A center finder for all small parts, dowels, toys, etc. Fits all standard 0.5 mm mechanical pencils and fine liners; the notch is 0.6 mm wide to allow for some tolerance in your printer. This model is actually sturdy, yet small. It has…
This model is a really cool knife that can actually cut humans and other organic tissues really well. The knife is basically an aligner for a piece of paper that does the cutting. It prints in two parts, simply slide the blade into it's…
- Fixed rail width for single stack installation, so no need to measure spacing between rails and confirm it's square, etc. - Actually made holes able to be used with countersunk screws, holes based on #8 wood screws. - Actually made…
active charging cradle for a brodit car mounting platform
I'M NEVER SURE IF I ACTUALLY HAVE FREE TIME OR IF I JUST KEEP FORGETTING SH_T, sign Category: Signs & Logos
Intro A pencil case shaped like a giant pencil is not a new idea. Making one that actually writes is the part I wanted to solve. The nose is a working three-jaw chuck. Push an ordinary pencil in point first, turn the wooden cone about…
As I'm sure some of you have noticed, the model for the XL drybox adapter that Polymaker provides is terrible, and apparently was designed for injection molding, not 3D printing. This is a small adapter that will do the same thing, and is…
First time using fusion sure didn't go too badly, or at least I'm happy with it. This is a coffee stencil that works!! You can add a touch of “special” to somebody's day, and bring them a coffee that had some wonderful art on it. This is…
if printing flat-ways, recommended to apply heat for ease of bending, i ran into layer de-lamination trying to attach it without. affix adapter to Vive DAS before you affix to the Quest 3. thank you very much for the .step files, op 🙏🙏🙏🙏…
Rubber Band Gun / Launcher toy that actually works! Easy-to-print, reliable rubber band launcher, can load up to 4 rubber bands. Great toy! Two versions: with rivets (small filament pieces are used as rivets, looks pretty) and without…
After multiple prototype where I put the sensor and the Esp in the same box, I found out that even with many walls between them the heat from the voltage regulator would make the sensor read 0,5 to 2 °C more than a sensor in the open air.…
just look at the original
There are holes underneath the phone and earbud slots so you can charge them ergonomically. This tray also has room underneath so your cables can sit underneath without effecting the structure. Be sure to look at the 3D model near the…
Designed specifically to beat @chmarr 's Very-low-polygon Pikachu Features: Lowest-polygon Pikachu, for realsies. 33% less polygons! (4 polygons vs 6), an impressive optimization if I do say so myself. Easy, fast print. No supports…
The X1C LED covers I came across would not allow the LED board to line up correctly. I made a few modifications that will account for the differences in PCB manufacturing and will work with all X1C models regardless of production year.
I wanted something to hold a ‘Sharpie’ pen next to where I have mounted a digital caliper. Found a simple model on thingiverse, and started the process of modifying the design file from there, but then decided I wanted to trial using…
I have tried many different downloads of datum locators that claim they are made for the X-Carve, yet they weren't made for the modular table. This design has counterbored M5 holes that are on 80mm center, just like the modular waste…
description of a figure i guess (Beta)
Stick hook for getting stuff from under the sofa. A hook that you attach to a stick. It helps get stuff from under the sofa. Printing: I printed it from PLA. I used 3 perimeters and 20% infill but you can try less. Don't use supports.…
prop saver that actually works "print with pla or pla + for optimal performance
I'M NEVER SURE IF I ACTUALLY HAVE FREE TIME OR IF I JUST KEEP FORGETTING SH_T, sign Category: Signs & Logos
A nice object to show to your annoying friends.
Will require strong glue, parts are pretty self-explanatory. Knob holders must be glued around the knobs and knobs shouldn't be glued. Antenna is put in from the inside. Side plate has a hole for cables for devices such as speakers to…
A game card holder for 12 games. looks like it has a thread top, but is a snap top with a threaded design. about 2 hr print job
Medium / Small Box Only Requires Knob and Pinion from original post
Fixed several issues with both the original and earlier "fixed" versions.
Hi! We fulfilled our dream of owning a sound system! And yet we're poor and live in a small apartment, so we can't put the speakers further away behind our sofa as it's suggested. Also, we wanted something pretty for our living room! So…
uses a ¼ dowel rod at .70 inches or 17.9mm for the normal file file with .32 at the end uses a .32 inches axle rod or 8/25 rod at the same length of .70 inches added new models that have a better response pattern to increase…
This model is designed to be printed with TPU and a very specific configuration of settings to keep it as soft as possible. Boot settings (already in 3mf) Use a 0.4mm nozzle with all line width set to 0.45mm (important!) Use 1 perimeter…
Bought some inexpensive Chinese-sourced brushless ESCs for my RC cars. They came with open battery terminals. Since I have a propensity to reach around blind, I found this to be somewhat dangerous, so I took off the bottom cover and…
Backpack Hanger This backpack hanger is very similar to ones you've probably seen with one main difference. It snaps on to the pole making it very difficult to fall. I've always had issues with other people's designs falling out of my…
Every spider-in-a-web earring out there is one static plaque. This one has a pivot . The spider hangs below the orb web on a dragline whose top end is an eye , captured on a post fused to the web hub and closed by a cone cap. The eye…
ehh, floating long benchy, improved from a model from thingiverse, ehh
A long die : a square rod marked on its four long sides, capped at both ends so it can never come to rest on one. You roll it like a pencil and read the number on top. Why this shape exists. The d4 is the one polyhedral die that does not…
Detailed 3D printable Old Wizard Who Is Actually A Cat Standing On Hind Legs In Disguise figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…
Tired of those door stops that just slide around on carpet? Here's mine which works better than ones you can buy from the store. It's designed to with several features for maximum grip on carpet.
I uploaded this model so other people don't have to waste an hour printing just to find out that it doesn't fit at all. I tested it as shown in pics. Works 100% with WMVos 's side mount:…
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Description ❄ Frost Flyer – A Snowflake That Actually Flies! This 3D printable snowflake isn’t just for decoration — it flies like a frisbee! Perfect for winter fun, desk tossing, or simply showcasing your print precision. 🧱 Print…
This model is a really cool knife that can actually cut humans and other organic tissues really well. The knife is basically an aligner for a piece of paper that does the cutting. It prints in two parts, simply slide the blade into it's…
if printing flat-ways, recommended to apply heat for ease of bending, i ran into layer de-lamination trying to attach it without. affix adapter to Vive DAS before you affix to the Quest 3. thank you very much for the .step files, op 🙏🙏🙏🙏…
A business card that includes many different tools and is also the size of a regular credit card, so it will fit in your wallet. Includes: ruler protractor bottle opener M2, M3, M4, M5, M6, M8, M10 hex wrench holes flathead screwdriver…
This simple attachement will let your Benchy float in less than an hour of printing time! I printed mine with NO INFILL , and i recommend using tree supports , they are very easy to remove. Please make sure to check out my other benchy…
Use supports for "mag" file, use 8 loops of walls for spring file, the rest is pretty standard. Correct printing orientation is shown in photo. Assemble using two, long M3 bolts, no need for lower nut. Happy shooting!
Description ❄ Frost Flyer – A Snowflake That Actually Flies! This 3D printable snowflake isn’t just for decoration — it flies like a frisbee! Perfect for winter fun, desk tossing, or simply showcasing your print precision. 🧱 Print…
![Actually accurate Esp8266 (Esp01s) Temperature sensor using ds18b20 [Tasmota/EspHome]](https://media.printables.com/media/prints/279448/images/5649478_1530bba2-be3c-4b75-83c3-65522573e3dc_282046f2-afd2-424a-bf0c-cdabdbfa6927/screenshot-2024-01-13-alle-213022.png)
