142 models
A simple outside radius gauge for 1-15mm. Eine einfache Außenradiuslehre für 1-15 mm.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
A simple inside radius gauge for 1-15mm. Eine einfache Innenradiuslehre für 1–15 mm.
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Here you get all the files you need, to create your very own Multicolor gradient filament. It will have short transitions and will be about 9.5 meters long. If you have a filament sensor on your device you should be able to combine the…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
Coasters of the 15 retired numbers of the 18 NHL Montreal Canadiens players. The coasters only have the numbers, not the names or the dates the player was with the team. Coasters I only printed the numbers 3, 4, 9, 10, 16 and 33 as a…
Print approx. €6.29–€7.68 excl. taxPreliminary estimate for one variant
I made some Radius gauges. There are two versions of the pre-sliced gcode files, one with and one without colorchange for the numbers The radii are as following: 1-20mm: 0.5mm steps; 20-40mm: 1mm steps; 45mm; 50mm; have fun with them
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Radius Gauge R 0.5 – R 30 This practical accessory is designed specifically for 3D printing and is ideal for checking or marking internal and external radii. Just print the sizes you need – from R 0.5 to R 30 – and use them flexibly in…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Die Lehre eignet sich gut, um größere Radien von Modellen oder Skizzen abzunehmen, wenn kein vollständiger für eine Messung mit einem anderen Gerät vorhanden ist. Das Modell ist aus PETG und mit MMU3 gedruckt. Es ist damit ein wenig…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Badge des Canadiens de Montréal tricolore, conçu pour extrudeur simple couleur avec changement manuel de couleur. Design spécifique pour un fond blanc, une hauteur de couche de 0.2 mm et deux couches par couleur (pour plus d'opacité). Le…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
A friend wanted some HABS (Montreal Canadiens) coasters but wanted them flat not staggered / layered for the different colours. Import as project or use the gcodes 1 for a single and the other for a set of 4. I use a round cork bottom…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
This is a remix of my capillary toy to create a color gradient in a simple, visible way. Most of the diffusion takes place in the paper towel, so this isn't really a mixing device. I'm interested in capillary-driven open-channel flow at…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
In de winkel was niet het juiste formaat te vinden, maar de printer wist er wel raad mee. The right size could not be fo.
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
This is an example of the gradient infill script made by CNC Kitchen. This is the video he made about it: https://www.youtube.com/watch?v=hq53gsYREHU . Originally it was made to work with Cura. I adopted the script to work in Prusa, Bambu…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
ABS ID card
Print approx. €8.81–€10.77 excl. taxPreliminary estimate for one variant
Have you ever had an issue with RGB strips falling off the back of your TV? Well, so have I. I was also very unhappy with how it bounced off the back of the wall and the lack of even glow around the TV. So, rather than spend an extra…
Here are four different mounts for Philips Hue Gradient Ambience Lightstrip. First one is a loose fit and the second one is a much more tighter fit. The other two mounts are the loose fit, but with an 30 or 45 degree angle. These mounts…
Für die Benutzung dieser Schablonen ist ein Bündigfräser mit Kugelanlauflager unten sowie ein Frästisch notwendig. Jede Schablone hat zwei Radien, die man durch Umdrehen benutzen kann. Die Schablonen gibt es in folgenden Größen: 0,5-1,0cm…
Was? Eine Lehre für Radien von einem Radius von 1,5mm bis zu 7,5mm. man kann mit diesem den innen sowie außen Radius messen. Bauen Welche Version: V1.0: Die erste Version, in der man die “Lehren” noch feilen musste. V2.0: Die zweite…
A Keychain with the canadiens logo.
This is a macro version of the microfluidic gradient generator technique (and geometry) presented in Cabaleiro 2020, doi:10.1016/j.cej.2019.122742. Ref. the supplemental data (3d models are included there). This could be promising for…
Montreal Canadiens logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more logos. Print at 100%…
Da beim Philips HUE Lightstrip Gradient ( Smarte LED streifen | Philips Hue DE ) nur Halterungen dabei sind welche stellenweise den Lightstrip am Fernseher halten habe ich hier einen durchgehenden / skalierbaren Halter entworfen welcher…
VERY EASY TO PRINT - NO BRIM OR SUPPORT ON ANY PART. See printing and assemblage instructions in the text file. You can also use the .3MF files provided for CURA or Prusa, which already include all the necessary print settings.
Die Schablone mit den Radien benötige ich öfter beim Drechseln. Nach einem Exemplar, das ich mit dem Lasercutter geschnitten hatte, ist das 3D gedruckte Teil noch besser, denn es ist mit Magneten (8x2mm) leicht an der Drechselbank bereit…
I have created this kit for bending 16x1.5 mm steel tubes building a frame for saddle bags for my motorbike. You will find the possibility to bend 8mm, 10mm, 12mm, 16mm tubes with different radius and I have also added the FreeCad files…
Tested in PLA and PETG at 100% infill Note this only works on the Tag Side of the Spool Want to buy me a Slice of Pizza? http://buymeacoffee.com/TheTexMech
Hockey pucks with Montreal Canadiens logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
I've found one of the most frustrating limitations of the genuine GraviTrax parts to be the lack of versatile connectors for sections with both elevation changes and angled turns. While custom-shaped rails offer some flexibility, in…
Mit dieser Frässchablone kann man, Ecken von Plattenwerkstoffen oder Massivholzplatten mit unterschiedlichen Radien abrunden. Außerdem kann die Schablone mit Hilfen von den System-Zwingen von Festool (oder ähnlich) am Werkstück befestigt…
Made this desk stand after a conversation on the AirGradient forums that there should be some airflow to the bottom vents. https://forum.airgradient.com/t/calibrate-humidity-sensor/994 Best to print flat on its back and add some support…
This is a really fun Montreal Canadiens themed hockey puck that you can display in your house or even play hockey with! Print Settings Rafts: No Supports: Yes Resolution: any Infill: 30-50% Filament: any pla/any blue and red Category:…
Complete rebuild of this model: https://www.thingiverse.com/thing:4662265 with the option of a second mounting position to mount the lightstrip either horizontal or vertical to the mount.
Inspired by LooseArrow I designed a radius gauge for radius 5, 10, 15 and 20 mm to use e.g. in woodworking projects. In my design the radii in the respective corner and the outer corner have the same radius to use it more versatile and I…
This is a replacement case for the AirGradient DIY air quality sensor that uses the v2 PCB. The biggest problem with these devices was that the temperature sensor was mounted directly on the PCB and would always read a few degrees high…
Kleine Radienlehre für Innen- und Außenradien 1-10mm.
You can use this test pattern to determine the correct thickness of material you need for different brightness values. If you don't want to print a 100x100 test part, then scale the XY, but do not scale the Z. If your material needs to be…
Montreal Canadiens Oversized Necklace Logo that I designed. I hope you enjoy!
Created my first 3d model with photoshop and tinkercad! Printed on an Ender 3 S1 Pro with Sonic pad running the normal profile for Ultimaker Cura
Custom "color" patterns are already populated for the project sliced layer height of 0.1mm can just load your flavor of filament profile and colors and test. I used my generator located here…
I took the design shared by forum user ‘ ttielemans ’ found here and added a 50 degree dovetail sliding LCD cover. That LCD is quite bright if you're using it in a bedroom and trying to sleep or if you just don't want to see it all the…
Allgemeines Radienlehren inklusive Halter für den Schreibtisch, welche schnell und einfach mit 0,25mm Layerhöhe zu drucken sind. Innen- & Außenradien von 1mm bis 24mm. In dem Halter ist bereits ein Loch vorgesehen für ein Kugellager. In…
A club member requested this simple prop for a cosplay event and it was super easy to make. Nothing special just sharing in case anyone else wants it too. Uses 6x2mm magnets.
A quick-to-print and functional filament color swatch. • Fast Printing Time : Only 18 minutes to print • Lightweight : Weighs just 3 grams, requiring minimal plastic • Depth Gradient : Features a depth gradient from 0.2 mm to 1 mm,…
This is a lampshade for “Philips Hue Gradient Signe Floor Lamp”. The lampshade is made out of 6 segments so it is printable on e.g. Prusa MK4. Slicing: 0.6mm nozzle, (printing time with 0.4mm nozzle is considerable longer on a Prusa MK4).…
Ich habe diese Schablonen konstruiert und stelle sie hier zur Verfügung. Print Settings Supports: No **Resolution:** 0,16 mm Infill: 25 % **Filament:** PLA Zusätzliches Material / additional material: 1x Schraube / screw M4 x 35 mm 1x…
Mit meiner Radienlehre hast du jede Rundung vin 1 bis 12mm Radius im Griff. Auch praktisch als Schlüsselanhänger für unterwegs geeignet und immer griffbereit.Mit meiner Radienlehre hast du jede Rundung vin 1 bis 12mm Radius im Griff. Auch…
This is a version that supports a 10mm gradient. 5mm gradient version is here : https://www.printables.com/model/1045537-versatile-5mm-gradient-tile-for-gravitrax ---- When building Gravitrax courses using only genuine parts, I've always…
Radienlehre für Außenradien in mm
This is a wallmount for the Philips Hue RGB Play Gradient Light Tube. The Philips Hue Gradient that goes on the back of your TV unfortunately only covers the LEFT / TOP / RIGHT. There is nothing at the bottom…. so if you wall mount your…
I have my TV standing on an Ikea Kallax shelf and I don't wanna mount it to the wall. When I got the new Hue Gradient Tube I was looking for a way to mount it behind the shelf so you wouldn't see it, instead of just laying it on the…
Print Settings Supports: No **Resolution:** 0,14 mm Infill: 25% **Filament:** PLA Zusätzliches Material / additional material: 1x Schraube / screw M4 x 40 mm 1x Mutter / nut / DIN934 M4 2x Scheibe / washer / DIN 125 Ø4 mm Gutes Gelingen…
Small wallmount clip for the Philips hue gradient lightstrip. When the tape is not holding anymore, you can screw these wall mount in the desired position and put the lightbar inside.
Sample G-Code for my Gradient Infill Method. Should work on most Bowden Style 3D printers with 1.75mm filament. Category: 3D Printing
Jeu du Tock canadien 2 à 6 joueurs , un jeu de cartes à imprimer est fourni en PDF et publisher.Les pions sont à imprimer 4X6 Canadian Tock game for 2 to 6 players, a pack of cards to print out is supplied in PDF and publisher format. The…
I created a gradient table lamp. The lamp uses a aluminium profile and a diffusor. A SK6812 LED strip is glued in the profile and connected to a WLED controller. Used parts: Aluminium profile - https://www.amazon.de/gp/product/B07PSN77DY…
LED lamp inspired by the Phillips Hue Gradient Sign, based on the ESP 8266 for connecting to WiFi and Alexa Lampe Led s'inspirant le la lampe Phillips Hue Gradient Signe. À base d'ESP 8266, pour connecter au wifi et à Alexa Matériel…
This is a version that supports a 5mm gradient. 10mm gradient version is here : https://www.printables.com/model/1048017-versatile-10mm-gradient-tile-for-gravitrax ---- When building Gravitrax courses using only genuine parts, I've always…
This model is sliced using 65 virtual extruders to create nice smooth gradient effect. If you want to correctly open the 3MF file, make sure to use PrusaSlicer 2.9.6 ( currently in beta ), or EasyPrint . For best results use layer hight…
Dark colors are from adding layers of black under the color, and the bright colors come from adding white underneath. These are best printed with: 100% infill 0.2mm layer height Iron on topmost surface 2+ at a time (to save on purged…
I've printed this on the side, for added strength
Inspired by LooseArrow I designed a radius gauge for radius 5, 10, 15 and 20 mm to use e.g. in woodworking projects. In my design the radii in the respective corner and the outer corner have the same radius to use it more versatile and I…
Radienlehren für Innenradien und Außenradien. 1 mm - 10 mm Radius in 1 mm Schritten.
4x M3-30 screws + 4 inserts are needed. https://cnckitchen.store/products/schraube?variant=47867092009295 + https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-standard-100-stk-pcs The connector i used:…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Inspired by a similar (but…
Have fun with rest color printing if you got a multi nozzle 3 colors go for full gradient Height Nosupport PLEASE se all the other stuff i got here https://www.printables.com/@Magig_I3Prusa/models
The floor lamp "Gradient Signe" by Philips Hue stands on a base with a diameter of 11.1cm at a height of 145cm. Even if there are no children in the house, this is very daring. Therefore, I have designed this base, which significantly…
2x M2x12 (bottom fan screws) 2x M2x8 (top fan screws) 2x M3x6 - flat head - accessories screws included with the hotend 2x M3x25 - hotend mount --- Want to support my work (STEP file available on patreon ) https://patreon.com/squirrelf3d
Inspired by Turbo_SunShine's design , I wanted to go further. I've marked this as a "remix", but the openscad and stl files are original -- just the idea is inspired by TSS This experiment shows that if you have a multi-material printer,…
Pilier pre vytvorenie stúpania pre koľajivo Tillig s podložím
This DIY enclosure for AirGradient Basic DIY indoor air quality monitor was inspired by my Ecobee thermostat. It features a baffle to separate the PM sensor fan intake and exhaust and it features a separate enclosure to isolate the…
Needed a wall mount with a back passthrough for powering it over a POE to USB-c adapter. Can be used with the existing cable guides
This is a feet extender that goes with the Philips Hue RGB Play Gradient Light Tube. It's meant to raise up the light tube a bit in case you need to run cords under it for example. I ultimately ended up wall mounting my light tube (I made…
Designed to fit IUT threaded inserts. The fit and finish is tight enough that it will hold itself with just friction, but can be screwed together if you want. The logo is based on the Montreal Canadiens team logo from Wikipedia, all…
This is a Philips Hue Gradient lightstrip mounted on an Ikea Besta. It can be used with inserts or nuts. Multiple sizes are available for both central supports.
After watching this YouTube video by Jeff Geerling . I printed and built the Air Gradient. In Jeff's video, he mentioned that temp sensor might give higher readings because of it's locations in the case. I noticed what I believe to be…
8 x 2 brick with an 8% grade to get a gradient of one brick per track
I wanted to have mine mounted at a certain angle so I could see the screen better while its tucked into a corner. I have provided the .stl, .step, .obj and .f3d files. I did not have to print this file with any supports as long as you…
I tried to make my own gradient filament but the ones I've found were meant for beds smaller or larger than mine. I guess others might have the same issues. Here's a 250mm diameter spiral. Process: Set a low layer height: 0.1mm Set z hop…
This is a star gradient side panel design for the modular lantern. It contains separate objects to print up to five colours (including the frame). The colours are layered in a way you can create very interesting color blends, using…
AirGradient is a great open source air quality monitor, and I keep one next to my 3d printer. Rather than stick it directly to my wall, I remixed Handro's desk stand (thanks for using Onshape and making it even easier!) with my HSW…
The default size has 3 height parts of 1mm each. I started with white filament, and then switched to blue, and then switched to red. The print in the photos was printed using 0.08 layer height. I recommend adding the pauses right after…
ReadMe.txt Radienlehre 3,0 bis 20,0 mm mit Box Anwendung: Radienlehre in Form einzelner Scheiben d=2mm mit Fase und einer zentralen Bohrung. Das Sortiment umfasst 35 einzelne Scheiben mit den Radien 3,0 bis 20,0 mm in 0,5mm Abstufungen.…
Polymer structure of Acrylonitrile Butadiene Styrene (ABS)
Using the attached m3f file, you can print this with minimal supports that are extremely easy to remove. I used PETG, but I think there would be no issue using PLA or whatever other material. To attach the holder to the HSW use one of “…
A small piece of printed gradient filament with source Fusion 360 file. There are better files with instructions on Printables and other sharing sites. But I made this to fit the size of my own model and printer. .3MF contains settings…
Radienlehre - radius gauge 1-10mm inner and outer Be careful when clueing both housing parts. I just used a drop of superclue
- Modeling glue like super glue/crazy glue is required for assembly. - You can use any RGB LED strip of your choice but i used this one https://www.amazon.ca/Lights-6-56ft-40-60in-Backlight-Remote/dp/B07MMNH5HH?th=1
When geological contacts cross valleys or hilltops, the contacts are bent. The direction and amount of bending depends on the slope of the valley and the dip of the contact. This is one of six models that demonstrate the “Rule of V's”.…
A series of layer changes entered manually in order to create a gradient effect between two colors.
Presenting Gradient Chef Easter Eggs Here are a few multicolor 3D printed gradient patterns I designed and applied to Easter egg models I made in Autodesk Fusion. The gradients in these 3MF files are designed in a tool l've built called…
Rainbow Gradient Dummy 13 This model uses 10 colors to make a cool rainbow effect on the dummy - without AMS. Good bed adhesion is crucial. It is not the models fault if it fails. Colors you will need for this: Black - For the entire…
Zum Zusammenbau alle Lehren mit der größten zuerst aufeinanderlegen und dann den Pin mit dem Schlitz eindrücken. Stack them all together like on the photo, biggest first, then put in the pin with the slit.
I needed a model to test the appearance of a filament at different layer height, so I designed this quick, easy to print swatch. If printed at 0.20mm layer height, you will get 4 samples of the same material to test its transparency.…
A simple mounting bracket for the AirGradient Outdoor Monitor. Can be attached to screws or mounting tapes / command strips to walls.
Designed to maximize the beauty of gradient and silk filaments. The organic twisted shape creates a dynamic look from every angle, making it a perfect centerpiece for desks, shelves, or gifts. ✅ No supports needed ✅ Fast and easy print ✅…
Dieses Modell ist eine moderne Interpretation der Halbton-Grafik im dreidimensionalen Raum. Die Oberfläche besteht aus einer präzisen Matrix von Vertiefungen, deren Größe sich über die Fläche hinweg verändert. Dadurch entsteht ein…
CA Closets rear channel mount for Philips Hue Gradient Ambience Lightstrip
embout faîtière sur canadienne cabanon 6 ou8 places
Remix of the Flattopper for a closer cut.
Ich habe mir hier einen simplen Radienlehren Organizer Konstruiert --------------------- I have constructed a simple radius gauge organizer here
