P
PrintablesVC Design
Adjustable Feet - Strong
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
- Downloads
- 10,836
- Likes
- 5,368
- Rating
- 4.87
Search results: adj
Counting matching models…
P
PrintablesSquidgyPlastic
Adjustable Airplane Phone Holder
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
- Downloads
- 6,112
- Likes
- 1,644
- Rating
- 4.59
P
PrintablesSneaks
Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
- Downloads
- 5,145
- Likes
- 1,029
- Rating
- 4.94
P
Printablesfuchsr
Super PINDA (SPINDA, S.P.I.N.D.A) Height Adjustment Tool, mounts into 3030 extrusion
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
- Downloads
- 4,924
- Likes
- 993
- Rating
- 4.88
P
Printablestestudor
Height-Adjustable Extension Feet for Lack Tables
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
- Downloads
- 2,422
- Likes
- 1,191
- Rating
- 5
P
Printablesishikawats
Adjustable Ruler Positioning Block
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
- Downloads
- 1,907
- Likes
- 734
- Rating
- 4.76
P
Printablesericman314
Adjustable Pipe Wrench
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
- Downloads
- 1,567
- Likes
- 180
- Rating
- 4.95
P
PrintablesRossero
Adjustable Curve Sketcher
Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…
- Downloads
- 1,394
- Likes
- 1,335
- Rating
- 4.69
P
PrintablesMartin Dobšovič
whistle with adjustable tone
the whistle is printed by color printing function, without support and you can change the depth of the tone by sliding
- Downloads
- 1,304
- Likes
- 258
- Rating
- 4.42
P
PrintablesConky
Work Sharp Precision Adjust Knife Sharpener - Support Block
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
- Downloads
- 1,163
- Likes
- 108
- Rating
- 5
P
PrintablesJerrari
GEN2 Adjustable Steel Sheet Holder
JERRARI3D.com Modular solution for storing steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa Mini, Creality Ender 3 Minimum sheet size: 175mm wide x…
- Downloads
- 1,042
- Likes
- 277
- Rating
- 4.92
P
PrintablesMW
Adjustable Wireless charging dock / Ikea Livboj / Powerwave / Anker / Nillkin
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
- Downloads
- 914
- Likes
- 141
- Rating
- 4.87
P
Printablesmaxmar
Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
- Downloads
- 795
- Likes
- 122
- Rating
- 5
P
PrintablesAlvomane
Adjustable Pillory Handcuff for Padlocks and Ropes | Verschiebbare Pranger-Handschelle für Vorhängeschlösser und Seile
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
- Downloads
- 783
- Likes
- 117
- Rating
- 5
P
PrintablesGearheadaddy
Live Z Adjust Helper
You can now easily adjust your Z. It is a square printed in the center of your Mini or Mini+ build plate. Print it with the stock 0.20mm QUALITY setting. I uploaded the STL and GCode.
- Downloads
- 748
- Likes
- 42
- Rating
- 4.94
P
Printablesso meone
esp32-cam OV2640 focus adjustment wrench tool
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
- Downloads
- 708
- Likes
- 49
- Rating
- 4.89
P
Printableskhosrua
3 x 3 Live Adjust Z Test Patches
One issue I kept running into when slicing test stl for Live Adjust Z was that PrusaSlicer has its own strong opinions on which patch to print first. A patch often gets printed at the back of the print bed, and subsequently became…
- Downloads
- 621
- Likes
- 48
- Rating
- 5
P
PrintablesJerrari
GEN2 Large Adjustable Steel Sheet Holder
JERRARI3D.com Modular solution for storing large steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa XL, Voron, etc. Minimum sheet size: Any width x…
- Downloads
- 524
- Likes
- 118
- Rating
- 5
P
Printablesch1a
Mechanical Counter: Adjusted Tolerance
I love this tally counter but the fit of the parts out of my printer was too tight for it to operate. I fiddled with my printer a bit, but figured I could use the practice so I traced the models in to Fusion 360 and adjusted the…
- Downloads
- 489
- Likes
- 63
- Rating
- 4.5
P
PrintablesJadozub
CarboPod - a lightweight and adjustable picatinny bipod made with CF tubes
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
- Downloads
- 419
- Likes
- 66
- Rating
- 0
P
PrintablesLawrence
Adjustable RC Plane Stand
This stand is 235 mm H 205 mm W 16mm D or 9. This stand is 235 mm H 205 mm W 16mm D 25 in H 8.07 in W .63 in T. The square holes are 15.9 mm or 5/8 Sq I used square holes instead of round so if you resize it you can cut the wood to that…
- Downloads
- 386
- Likes
- 27
- Rating
- 5
P
PrintablesLBussy
DASH: Dual Adjustable Spool Holder
This spool holder originates from Dominik Císař's work in the Original Prusa i3 MK3 ENCLOSURE - Ikea Lack table - Prusa Research . Subsequently, Necko released a remixed version of the spook holder leveraging 608 (skateboard) bearings. I…
- Downloads
- 297
- Likes
- 60
- Rating
- 4.71
P
PrintablesThe Random Maker
Raspberry Pi Camera Holder Module 3 (CM3) (Adjustable)
WHAT THIS IS: I wanted a raspberry pi camera module 3 (or CM3) holder for my robot. Most models uploaded on printables were made for 3D printers, so I couldn't get a design to fit my robot as they were all supposed to be directly…
- Downloads
- 284
- Likes
- 19
- Rating
- 5
P
PrintablesPotato King
Rotary drawer jewelry adjustable box
If you need more space for your tons of gold just add another drawer and connection rod. Print instructions Basic drawer is just top part and base part. If you need more drawers just print another basic drawer and connection rod. Ive used…
- Downloads
- 250
- Likes
- 58
- Rating
- 5
P
PrintablesLukáš Foukal
Snowplow for 3dsets Landy 4x4 with height adjust
This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…
- Downloads
- 238
- Likes
- 47
- Rating
- 5
P
Printablesrufisium
Adjustable trolling motor support with/without Minn Kota logo
This is a gift. I added the Minn Kota logo for the recipient. There's a blank version as well. I used a wide brim on the top files because I didn't want the print to fall over due to a narrow base. I also lined the top of the print…
- Downloads
- 228
- Likes
- 21
- Rating
- 0
P
Printablestom
Einstellbare Stütze für Pflanzen (Kräuter, Blumen, Gräser,...)/ Adjustable support for plants (herbs, flowers, grasses,...)
Eine stabile und einstellbare Stütze für Pflanzen, die ich nutze, wenn meine frisch geplanzten Küchenkräuter noch Halt benötigen. Um die Klammer für die Pflanze zu bewegen, hinten gegendrücken und die Stütze bewegen. Oder es auf eine…
- Downloads
- 207
- Likes
- 24
- Rating
- 5
P
PrintablesLukáš OK1ECH
Telescope Laser Collimator Adjustment Tool
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
- Downloads
- 204
- Likes
- 35
- Rating
- 5
P
PrintablesStillpointx
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter snap case / holder / knob
It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…
- Downloads
- 179
- Likes
- 19
- Rating
- 5
P
PrintablesChris Ne
BIKEMATE Adjustable bike light mount with Bikemate Mount / Justierbare Fahrradlicht - Halterung mit Bikemate Mount
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
- Downloads
- 157
- Likes
- 13
- Rating
- 0
P
PrintablesRob Latour
Adjustable case / stand for a Lilygo T-Display S3 AMOLED
This model was built in support of the free open source project described at https://rlatour.com/youtubesubscribercounter and is sized for the Lilygo T-Display S3 AMOLED display (version 1). A derivation of this model for the non-AMOLED…
- Downloads
- 134
- Likes
- 20
- Rating
- 0
P
PrintablesFerris Smart
Miniature “Adjustable” Crescent Wrench
I made this model to print earrings charms, it is a miniature version of the commonly used wrench in technical theatre. Modelled with a hole for a jump ring to jewelry hardware connection.
- Downloads
- 69
- Likes
- 27
- Rating
- 5
P
PrintablesShaun577
Magura MT7 Brake Bite Point Adjuster
Adds a bite point adjuster option to the levers of Magura MT7 brake systems. This allows adjustment of the amount of lever throw before the pads bite on the disc. Magura offers a BAT kit to try and do this but it doesn't really work and…
- Downloads
- 69
- Likes
- 17
- Rating
- 0
P
PrintablesPrints&Kinks
@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
- Downloads
- 63
- Likes
- 6
- Rating
- 0
P
Printablesfhartmann
Extruder Idler MMU2S Adjustable With Screw Adj. Housing with Power LED and State LED and MMU2s Filament Sensor
Preview: At the moment I am working on a version that lights up a bit brighter. As soon I got the values I`ll post it. Description: It is a combination of several Persons and remixed for my need: Used 3mm Green and Yellow LED with 2mAmps…
- Downloads
- 61
- Likes
- 20
- Rating
- 5
P
PrintablesPeter C
Golf - Putting Aid - Adjustable Putting Gate (50 - 75mm)
Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…
- Downloads
- 56
- Likes
- 5
- Rating
- 0
P
PrintablesThommyfix
Paracord shackle with adjustable width
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
- Downloads
- 45
- Likes
- 8
- Rating
- 5
P
PrintablesAlvomane
Adjustable VESA 200 TV/Monitor E27 LED-Lampholder | Verstellbarer VESA 200 Fernseher E27 LED-Lampenhalter
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
- Downloads
- 26
- Likes
- 11
- Rating
- 0
P
PrintablesMcDrucki
Adjustable hook to attach Christmas decorations e.g. on garage
Adjustable hook to attach Christmas decorations e.g. on garage
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesMarek Muláček
Segment for adjusting the saw angle Metabo KGS 305 M
Tiskl jsem v PLA výška vrstvy 0,13 segmenty 3 a hustota 18 bez podpěr..
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesHandy Handcrafts
Adjustable and Collapsable Dowel Display Rack/Stand
Here is a great way to add a support to a display board. We are using this to display my daughters necklaces, but you can use this to display or organize you collections or sales items. We even added a clip to keep a 1" or 25mm barbell…
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
PrintablesWertstatt
Steinel Night Matic Dämmerungsschalter cover for better adjustment | Abdeckung für leichte Einstellung
For the light to turn on at dawn, you need a switch like the shown one. To easily set it to the right threshold, you can use this cover which can be glued o the switch. Diese Abdeckung für den gängigen Dämmerungsschalter hilft, den…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesStillpointx
Adjustable Locking Clasp
Simple Adjustable clasp that I needed to use with a strap to lock in place for a laser diode module to test Photobiomodulation on different parts of the body. For more Information https://pbmwave.wordpress.com/
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesVictor
Solder Scroll - Ergonomic, Adjustable Solder Tool
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
- Downloads
- 54,414
- Likes
- 17,708
- Rating
- 4.88
P
PrintablesE. Soderberg
Phone Holder, smooth tilt adjustment, prints in place
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
- Downloads
- 44,693
- Likes
- 7,229
- Rating
- 4.81
P
Printableshappymaker
Adjustable Height Support
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
- Downloads
- 26,527
- Likes
- 13,175
- Rating
- 4.95
P
Printablessquinn
Adjustable PCB Holder Tool
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
- Downloads
- 21,944
- Likes
- 7,520
- Rating
- 4.92
P
Printableshumebeam
Adjustable Spool Holder for Silica Gel / Spool Weight
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
- Downloads
- 17,430
- Likes
- 3,005
- Rating
- 4.95
P
PrintablesGiskardReventlov
Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
- Downloads
- 15,938
- Likes
- 3,998
- Rating
- 4.88
P
PrintablesTheHamburglar
Adjustable drill angle guide
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
- Downloads
- 6,312
- Likes
- 2,956
- Rating
- 4.63
P
Printablesjq910
0.8mm thin adjustable credit card phone stand
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
- Downloads
- 5,502
- Likes
- 572
- Rating
- 4.85
P
Printablesap.engineering
Adjustable Notebook/Laptop Stand - Foldable / Print-in-Place
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
- Downloads
- 5,293
- Likes
- 415
- Rating
- 4.53
P
PrintablesTunantero
Multipurpose legs, adjustable in height and angle
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
- Downloads
- 5,103
- Likes
- 3,240
- Rating
- 4.87
P
PrintablesVC Design
Adjustable Feet - Strong
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Height-Adjustable Feet with Ball Joint — M20×2 Thread (Heavy-Duty, 75 kg Load Tested) These height-adjustable feet are designed for…
- Downloads
- 4,982
- Likes
- 2,866
- Rating
- 4.79
P
PrintablesMarcoPi
Heavy duty adjustable furniture leg
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
- Downloads
- 4,695
- Likes
- 3,146
- Rating
- 4.33
P
PrintablesTallat Mehmood
Adjustable Desktop Pen & Usb Cable Organizer
I have uploaded a new file with the updated main body, and also a new screw with the file name "screw update." Someone pointed out that they were facing a problem screwing the parts together. Because I only designed half of the part and…
- Downloads
- 4,552
- Likes
- 1,636
- Rating
- 4.71
P
Printableslukki15
Adjustable Dual Vertical Laptop Stand
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
- Downloads
- 4,497
- Likes
- 439
- Rating
- 4.83
P
Printables3Dplanner.be
Adjustable Self Watering Spike
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
- Downloads
- 4,198
- Likes
- 438
- Rating
- 3.83
P
PrintablesNeevoet
Adjustable Microphone Arm
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
- Downloads
- 3,922
- Likes
- 748
- Rating
- 4.88
P
PrintablesRESTLESS DESIGN
Adjustable Pipe Clamp
This model has been updated with a V2 version that requires M3 hardware! A .STEP file is now also included that you can use as a starting point for custom dovetail add-ons. Thanks to @bequ3 for his comments and improvements ;) I needed a…
- Downloads
- 3,883
- Likes
- 819
- Rating
- 4.7
P
PrintablesJDO solutions
Marble track - Motorized Lift 2021 version (v4) - stand-alone height adjustable Gravitrax compatible!
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
- Downloads
- 3,533
- Likes
- 468
- Rating
- 4.92
P
PrintablesPedroHBraga
Honeycomb Storage Wall - 235 mm × 235 mm, and 220 mm × 220 mm - Adjusted to maximize the usage of print beds from the AnkerMake M5 and M5C printers
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
- Downloads
- 3,351
- Likes
- 1,030
- Rating
- 4.71
P
Printableshumebeam
Funnel for Adjustable Spool Holder for Silica Gel / Spool Weight
About This is a funnel for easily filling the Adjustable Spool Holder for Silica Gel / Spool Weight with silica gel. It also fits the hygrometer version of course as it has the same lid dimensions. It was designed so it can be easily be…
- Downloads
- 3,298
- Likes
- 361
- Rating
- 5
P
Printablesdanec
"Plasticlamp" Multi-Purpose Clamp: Adjustable Phone Holder, Magnetic Ring Option, Camera Mount, and Flashlight Support
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
- Downloads
- 3,247
- Likes
- 936
- Rating
- 4.78
P
Printableskriswillcode
Adjustable Fidget Switch
After seeing many people's problems with my previous fidget switch' s spring, I decided to create a new variant that allows you to adjust the spring's tension whenever you want. Some days you may want a soft, tactile click; other days you…
- Downloads
- 3,177
- Likes
- 819
- Rating
- 4.87
P
Printablestuncay
Articulated mouse (adjusted tail)
Printing recommendations: FILAMENT TYPE TPU 85-A INFILL 25% WALLS 1 MM LAYERHEIGHT 0.20 MM Original designer: This is an articulated mouse. It can move its head and its tail. No assembly needed. It prints already assembled…
- Downloads
- 3,087
- Likes
- 387
- Rating
- 4.94
P
PrintablesTwotone74
Adjustable Rope Clamp Rope Tensioner (Parametric)
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”. There…
- Downloads
- 3,063
- Likes
- 827
- Rating
- 4.94
P
PrintablesIoannis Giannakas
(New Version!) Adjustable gantry mounted nozzle seal, parking and silicone nozzle brush / cleaner for Voron (2.4/Trident)
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
- Downloads
- 3,024
- Likes
- 758
- Rating
- 4.79
P
PrintablesLV3D
Adjustable feet
Adjustable Feet Practical adjustable feet, perfect for DIY projects, cabinets, tables, or 3D printers. The threaded design allows you to easily adjust the height and keep your furniture or machines stable on uneven surfaces. Versions…
- Downloads
- 3,022
- Likes
- 1,261
- Rating
- 4.58
P
PrintablesEric T
Adjustable Low Stress Training(LST) Clip
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
- Downloads
- 3,010
- Likes
- 166
- Rating
- 5
P
PrintablesKN16
Adjustable Stock for AR
Very detailed instructions can be found in the PDF file under “Other Files”.
- Downloads
- 3,010
- Likes
- 417
- Rating
- 0
P
PrintablesInaniaEtVana
Multifunctional Adjustable Desk Mount
Whether you need a small adjustable holder for a pocket light or a new mount for your microphone, this model does it all, is adjustable (mechanical lock, not a friction lock) and clamps right onto any surface. Should be able to carry…
- Downloads
- 2,960
- Likes
- 1,810
- Rating
- 5
P
PrintablesDušan Sedlačík
Adjustable GPU Graphics Card Support Bracket
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
- Downloads
- 2,902
- Likes
- 446
- Rating
- 4.71
P
PrintablesPetr Vacek
Adjustable Bed Frame Leg
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
- Downloads
- 2,889
- Likes
- 841
- Rating
- 5
P
PrintablesscaryPug
Adjustable Drawing Tablet Stand (Modular)
Update 18th May 2022 16" Tablet version added, requested by a printables user, untested yet. This version needs at least 300x300mm bed size 3D printers like Creality CR10. Including in the folder V1 and V2 front braces. Old V2 legs will…
- Downloads
- 2,878
- Likes
- 901
- Rating
- 4.8
P
PrintablesLevi
AR Style Adjustable Butt Stock
I was looking for a fully 3D printed AR style butt stock, but couldn't find a decent option that I liked. So, I designed this one. I hope you like it. It fits on a standard mil-spec buffer tube, and it also fits on my own designed buffer…
- Downloads
- 2,691
- Likes
- 356
- Rating
- 4.8
P
PrintablesDDivs
Adjustable Book Display Stand
A book or comic book display stand so you can proudly show off the best of your collection. Print two of the legs, and one horizontal bar as seen in the pictures, easily breaks down and comes together again making book display simple.
- Downloads
- 2,659
- Likes
- 255
- Rating
- 4.85
P
PrintablesFattum
Adjustable furniture leg 43-71 mm with trapezoidal thread
The height of the leg can be adjusted from 43 mm to 71 mm.
- Downloads
- 2,541
- Likes
- 1,348
- Rating
- 5
P
Printables3DPrintDemon
SV06 PLUS Vortex V2 Adjustable Cooling & LED System
…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…
- Downloads
- 2,477
- Likes
- 408
- Rating
- 5
P
PrintablesJLCURTIS
V400 Speeder Pad Adjustable Arm Mount
3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…
- Downloads
- 2,455
- Likes
- 164
- Rating
- 4.87
P
PrintablesPrusa Research
Adjustable Thermometer bracket for Original Prusa Enclosure
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
- Downloads
- 2,442
- Likes
- 503
- Rating
- 4.97
P
PrintablesDvG3DAtelier
Chain Link Bracelet – Slim, Reversible Jewelry, Adjustable and more Secure Fit
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
- Downloads
- 2,423
- Likes
- 807
- Rating
- 5
P
PrintablesThe Kit Card Guy
Height-adjustable Car Lift Kit Card (1:24 scale)
Summary This is a 1:24 sclae model of car lifter in a kit card style. They also fit the 1:24 models I have published. Can also be used for 1:18 scale models. After printing, the model can be assembled with the help of integrated…
- Downloads
- 2,377
- Likes
- 507
- Rating
- 5
P
PrintablesSimon
Adjustable Furniture Leg
I remixed Petr Vacek@PetrVacek_20701 's awesome model to accomodate my kitchen which needed new legs. Includes clips to attatch a plate beneath the kitchen cabinets, and also a wrench for easy tightening while the leg is under pressure.…
- Downloads
- 2,363
- Likes
- 653
- Rating
- 5
P
PrintablesArmand
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
- Downloads
- 2,326
- Likes
- 1,577
- Rating
- 4.91
P
Printablesmkingery
Delta Stand v2 - 3 Way Adjustable Stand
Each half of the stand is 30mm wide to help promote stability underneath the laptop or tablet. There are 2 frame versions that are cross compatible with all v2 Feet and provide slightly different angle options. v2 is a Right Triangle…
- Downloads
- 2,285
- Likes
- 513
- Rating
- 4.91
P
PrintablesDiggle
Print-in-Place Adjustable Wrench
Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces
- Downloads
- 2,267
- Likes
- 215
- Rating
- 4.8
P
PrintablesjohnyHV
esp32-cam OV2640 focus adjustment wrench
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
- Downloads
- 2,166
- Likes
- 99
- Rating
- 4.69
P
PrintablesPresswerk65
Adjustable laptop stand
This stand fits Laptops up to 17'', one size fits all (tested with 17'' and 14'' devices) The base does barely fit on the print bed of a i3MK3 - you have to rotate it to the diagonal. Further, add some more perimeters for the bolt and the…
- Downloads
- 2,161
- Likes
- 369
- Rating
- 4.74
P
Printablesbod_3d
Gravity Adjustable Phone Desk Stand
Tired of phone stands that sag under the weight of an Ultra or Pro Max smartphone? This Gravity Desk Station is a heavy-duty, professional-grade solution designed for maximum stability and precision. It uses a smart mechanical linkage to…
- Downloads
- 2,141
- Likes
- 953
- Rating
- 4.73
P
PrintablesFirstlayer Oy
Adjustable Support / Furniture Leg (Easy to print)
Adjustable Support / Furniture Leg Introducing the versatile and durable 3D-Printable Adjustable Support / Furniture Leg, designed to cater to the needs of DIY enthusiasts, professional carpenters, and general consumers alike. Perfect for…
- Downloads
- 2,112
- Likes
- 614
- Rating
- 5
P
PrintablesManicken.se
Skadis / Skådis adjustable tape holder
Keep your tape rolls organized with this adjustable tape holder designed for the IKEA Skådis system. This versatile holder fits tape of all sizes, making it a practical addition to any home setup. The design includes two side arms with…
- Downloads
- 2,101
- Likes
- 537
- Rating
- 4.93
P
Printablesfranpoli
Adjustable desk hook
This model is inspired by the Desk Bag Hook from PieSupplies . This variante is more rounded and offer an additional hook. The FreeCAD source file with some parametric options is attached. The photographies display the model desk_hook.3mf…
- Downloads
- 2,085
- Likes
- 419
- Rating
- 4.89
P
Printablesdodasch
SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
- Downloads
- 2,058
- Likes
- 103
- Rating
- 5
P
Printableshappymaker
Adjustable Door / Window Stopper
Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…
- Downloads
- 2,047
- Likes
- 1,055
- Rating
- 5
P
PrintablesOrdinaryWonder
Gridfinity Adjustable Jumper Wire Comb Fixed Base
A redesign of Zach Freedman's jumper wire comb so it doesn't require magnets. Should be fully compatible. The included picture shows both my comb and Zach's original in one of my bases. Changes: The base is one piece, rather than two. The…
- Downloads
- 1,988
- Likes
- 225
- Rating
- 4.95
P
Printables3D-Muc
Adjustable Folding Phone Stand / Holder
Yes, here is my 100th template :-) This is a modification of the template from : "Adjustable Folding Phone Stand - Single piece print, built in hinges" https://www.thingiverse.com/thing:3041592 What else have I done? The template can be…
- Downloads
- 1,982
- Likes
- 162
- Rating
- 4.5
P
PrintablesKonstantin Radchenko
Adjustable utility knife
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
- Downloads
- 1,969
- Likes
- 1,026
- Rating
- 4.83
P
PrintablesKuban66
Furniture adjustable leg
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
- Downloads
- 1,958
- Likes
- 209
- Rating
- 4.6
P
PrintablesSubSite
Print In Place Adjustable Filament Sample Spool
This is an adjustable print-in-place spool for filament samples. No assembly needed, just remove from build plate, snap off the built-in supports and you're good to go. How to use: Adjust the arms inwards until you can fit the sample roll…
- Downloads
- 1,943
- Likes
- 386
- Rating
- 4.78