329 models
Seagate External Hard Drive storage container. also has a spot for storing the USB cable. There is a hole in the back of the unit to access the port while keeping the drive in place.
Under desk drawer for Seagate Expansion USB 2.0 with locking. Material: PETG, ABS, ASA etc. Layer high: 0,3 or lower Supports are needed.
Needed a way to mount my portable hard disk on the wall. Din rails are pretty ubiquitous, so I decided to use that. Put the two pieces together with a 3mm screw or super glue. It is a pretty tight friction fit so it will stay in the box.…
Die Wände sind mit 1mm dünn, die Bohrlöcher sind für die auf dem Foto dargestellten Spax entwickelt. Nicht zu fest randonnern, bei mir ist die Rückwand ein wenig gesplittert. PLA-NX1 von Extruder wurde hier benutzt. Hab den vorbereitete…
I connected several external hard drives - Seagate Basic 2.5" portable drives - to my Raspberry Pi so it so I can use it as a NAS storage. This part will hold 4 drives. I printed it in PETG - the previous version printed in PLA started to…
Seagate couldn't choose a worse USB connector for their drives (USB 3.0 Standard-B would be perfect, but it would cost them some cents more). It's already very flimsy out of the box…now imagine how it is after some plug/unplug and falling…
I wanted to purchase some more seed tray inserts made by Stuart, only to find that they have discontinued them. 3D printing to the rescue! The inserts are 205mm long and 72mm wide and you can fit five of them into a standard propagator…
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
I made this model a while back, to hold floral tubes in which to propagate plants by cuttings. But then I wanted something more space-efficient, and something I could hang from a hook if desired. This is just a big block with 13 holes in…
Tactile image of asexual reproduction by vegetive propagation. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
You can use this as propagating station, simply put your plant cuttings in the cups, fill the cups with something like rock wool to keep that plant straight. You can also add LEDs to the top, there is a channel for a cable. You can also…
Uses the ancient method of Air Layering which is about growing roots right onto the branches to replicate your existing plants and produce a new one. It works on both indoor and outdoor plants. The propagation pods are safe for the mother…
This is Version 2 of my Cuttings Propagation Helper . This version now provides a fit-for-all mechanism to hold onto the cuttings! How to Use Clamp your cuttings into the ribs, place the flower over a jar filled with water and let nature…
Introduction This is remix of Mikolas Zuzas propagation station. I though the design was beautiful, but I couldn't print it since it didn't fit on the Mini print bed. Mikolas kindly provided the Fusion file in his upload. I redesigned the…
I DO NOT technically own the rights to the original character (ragatha in this case) and I took heavy inspiration on its animiz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
Plant Propagation Lid for Mason Jar. Fits half-pint mason jars and aids in plant propagation by holding your plant cuttings so while they grow roots in water.
While soldering do you ever think to yourself "Gosh dang! I wish I had a fume extractor that could move air like those fancy new Mac Pro's!" I did, so I made The Fumagator. A soldering fume extractor solution for the 21st century. Take a…
Bring elegance and greenery together with this Infinity Propagation Vase . Inspired by the infinity symbol, this modern planter combines clean geometric lines with functional plant propagation. The design securely holds two 25mm diameter…
I remixed the original stl file for a better fit for my Seagate HDDs. Just shortened the model a bit on the Y-axis. Enjoy!
This design has a capacity of 21 std industry 28x28mm plugs Update(Feb23): design updated. Water bed increased to 6mm (from 5mm) and outer water ports increased to 7mm (from 5mm) to achieve more even water supply to central plugs. The…
Amatsu AKA Amatsumagatsuchi from Monster Hunter Generations Ultimate Category: Creatures
Gridfinity Boxes to store up to 12x 2.5 '' SSDs and up to 10x 2.5 '' HDDs. There are different Sizes of boxes for different amount of SSDs and HDDs to fit your needs. Sizes The first number set is the size of the Gridfinity Box. There are…
Simple to print, takeup spool I made for my Smena 8 camera, It needs only a small cut on film to work. first 2-3 perforations from upper row. Cut in slicer at 37mm height. Print on flat surfaces, then glue. Layers resolution - highest…
Subscribe Now! Time-lapse print video : https://youtu.be/k_KrFBEt8CE Remix to support free. (Original https://www.thingiverse.com/thing:2940587 ) Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D…
Capture the determined spirit of a Demon Slayer with this 3D printable STL model of Zenitsu Agatsuma in a Standing Pose. This iconic character figure is perfect for fans looking to add a powerful and recognizable piece from the beloved…
Note: Please comment if you are interested in these sort of things! This really tells me what I should make in the future. Thanks! Important info: For those who want to know, this model was designed in Onshape . The root ball is measured…
I made this decorative wall mounted test tube holder for propagating plant clippings and succulents, it is easy to water and remove the test tubes. This allows for easy viewing of growing roots and add a classy minimalist look to any…
90mm wide Pothos holder for rimless fish tanks. This will tension clip a cutting to the side of your tank. Pothos are great for getting rid of nitrate in the aquarium. I use it on a Fluval Chi tank. The glass is 4.5mm thick. PETG 10%…
Modular external hard drive stacking system with dimensions that fit popular 2TB/4TB portable drives. I can confirm that the large tray fits a 4TB Seagate Backup Plus and the small tray fits a 2TB Seagate Backup Plus Slim or a 2TB WD…
new design! you can check out version 2 of my propagation helper! This handy little tool is inteded to go on a mason jar. You'll surely find a fit for your cutting with the differently sized holes: 1 x 3 mm 2 x 5 mm 2 x 6 mm 1 x 8 mm 1 x…
I made this small propagation planter to be all inclusive. This means it has a drainage hole in the bottom wich is partially pre covered in order for the soil to stay in place. Cura has some issues sliceing this model, I reccoment useing…
Root ball with built in hinge and locking clip
If you have more than one drive attached to your computer, this rack/stand may make your work space a little more efficient by allowing you to stack the drives. I created it to accommodate my 2TB and 4TB drives. It has internal dimensions…
Designed to hold a material such as sphagnum moss in place around a vine's node to encourage the growth of new roots. When roots are sufficiently grown, the vine can be cut and immediately planted in soil without having to root in water…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Floragato, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
A simple model to prop up plant cuttings! Use it with empty Oui yogurt jars. The lid fits in loosely into the top. I printed it on the Bambu textured PEI plate with a 0.1x0.1 fuzzy skin and 10% gyroid infill. I welcome your ideas on how…
the parkside mini greenhouse comes with one time use seed starter tray, these elements can be reused. no supports needed
This a complete redesign of https://www.thingiverse.com/thing:4526477/files The original file did not have a thick enough wall. The "base" is 6mm, and the ball internal diameter is 2.5" (63.5mm). The holes to join the two halves together…
Being stuck inside with the pandemic going on has got me plunging in to hobbies that I've not done in awhile. I've got a bunch of plants that I'm propagating now and figured I would combine it with my other hobby fish/aquariums. Category:…
I've created a holder for my 3.5" Seagate Expansion HDD for the Honeycomb storage wall . It should fit for other HDDs, the size I used for modeling: 121x176.5x37mm + a bit of space (it's not tight fit) It contains two models which need to…
A remix of Everett for growing plants in a mason jar. Holes so that I could easily replant them when roots long enough.
Diese detaillierte 3D-Druckmodell-Büste stellt Zenitsu Agatsuma aus der beliebten Anime-Serie "Demon Slayer" dar. Die Büste zeigt Zenitsu mit seiner markanten Frisur und seinem traditionellen, auffälligen Kimono. Das Modell ist auf einem…
This device is for propagating trees/shrubs Dieses Gerät dient der Vermehrung von Bäumen/Sträuchern print two of the domes scale the domes for your needs no support needed fill the domes with soil moisture the soil take branch of a tree…
Introducing the "Fridge Farm" – for when your plant addiction outgrows your floor space! Inspired by the unexpected sunbeam disco off my fridge, I crafted a solution that won't make my landlord frown. These aren't your grandma's fridge…
Kit: To print a single kit, I have provided a 3mf file containing 2 halves of the ball and 4 clips, the one in the picture aws printed with PLA. You can also find each element separately in STL format. Propagating Plants with Air…
I'm remixing the Polly the Propagator Ball designed for a 20mm branch — itself a very nice 3D-printable interpretation of the classic air layering pod/ball/box, a version of which you can make by recycling any appropriately-sized plastic…
The remix provides a FreeCAD project file with all parts for your customization needs. Changes from original: Wider cable channel through the spine of the model. Exit hole at “earth” level for moisture monitoring with nice cabling Changed…
Zenitsu Agatsuma Filament Painting Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Skin/Beige At layer #18 (1.52mm) swap to WHITE At layer #26…
Model is of a lid for a standard mason jar to make it look like a lil mushroom. Holes in the top allow for plant clippings to be placed with ends in water for propagation. I'm hoping to later add coverings for the holes you don't use and…
This propagation aid can be used for containers with an opening between 5.5 cm and 6 cm in diameter. One aid has a narrower rim and the hole has a diameter of 1 cm for smaller plants. The other aid has an 8 mm wide rim at the top and a…
How to propagate plants? There are a lot of tutorials on the internet, I liked this one Step 1: Leaf Cutting/Trimming/Root Division Depending on the type of plant you're working with, you'll begin with cutting or dividing your plant. For…
This is a simple dual tube propagation station for starting new plants. Glass tubes not included. The bottom has dimples so the rounded end glass tubes will stay in place. The tube holes are 25.5mm. If you would like a larger, 4 tube…
Some of my succulents had gotten pretty leggy, so I designed this propagation tray to fit on my windowsill. It's designed to be a quick print, printed in vase mode. My settings (the 3mf and gcode reflect this): PETG 0.6mm nozzle 0.3mm…
Help your succulents propagate with this specifically designed succulent propagates, you can propagate more than 10 leafs and with the included drainage holes your chances of success will be increased. Print instructions Use "detect thin…
Remember the following text: Inspiration from https://gravcut.com/collections/tout-poduits . I'm not the original creator of this look, but I am the one who converted it to be 3D printed! Enjoy! Category: 2D Art
Makes it harder for the HDD to tilt sideways.
Model number: SRD0NF1 Full height with HDD installed: 85.5 mm
The character Zenitsu Agatsuma from demon slayer standing on a platform.
Here is the model for Agatha Bear. Agatha is a good Friend of Barry, and like her friend she wants to be your friend too, do you have space for Agatha? maybe she can keep Barry Company. I hope you enjoy, Thanks Bugman If you like what I…
The Original Clip can only slice on half the way. This one fits the hole thing. But you have to print it in 105%!
We used normal planting seeds. https://blog.prusaprinters.org/how-to-make-food-grade
Hi, I've done this holder for my "Home Server" to have a mini pc HP EliteDesk 800 G4, a power supply and a Seagate Expansion hard disk drive of 6Tb, to have everything on the same place and have a better airflow. Print settings: 0.20 of…
It can stay on the spool in the Bambu Lab AMS. I like that much better than clips that go on the roll edge.
It is a remix of this model https://www.printables.com/model/127175-ps5-external-hdd-holder with slightly wider depth and width. Printed using PLA with regular settings.
There are files for both regular and wide-mouth mason jars. Prints in two pieces so that it is easier to remove once the roots come in.
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Cut a hole according to the given dimensions. Glue the air vent in place.
I needed an easy way to mount my backup drive next to my mounted raspberry pi for a wall mounted out of the way offsite backup solution. I picked up a Seagate Backup Plus Portable 4tb drive and made the mount in inventor. I printed it…
As said, added 15mm version for fatter HDDS (as WD WD20NPVT or Seagate ST4000LM024) They fit great in NAS or IcyBox, frame are super stable! Print with 3 walls. tops and bottom, 0.2mm layer, 20% infill
I designed this little clip because my wife wanted to start trying to propagate some plants from clippings other people had given her. The larger part of the clip rests on the lip of a jar or glass, and the smaller clip is designed to…
A small remix of Camille Gerrick 's Oui Jar Plant Propagation Lid . I simply added some holes to the top, in a cute petal shape of course, to allow for better airflow within the jar 🌼 My cuttings are very small, so I want to try my best…
Size guide: MINI: very small pots ideal for single leafs and cuttings XL: big pots for grown plants or bigger leafs Note: MINI is just a 50 % downsized version of XL, so you can just transform them into each other or even create new sizes…
Tsuba for Magatsumi from Kagurabachi! Tsuba file, designed for a real blade - 7mm thick blade Tsuba file, split in half for flatter printing Cosplay tsuba file, split in half for flatter printing. Designed for a wider prop blade A cleaner…
Add supports so that it prints properly it helps a lot.
SEGATE HS SSD 2T external hard drive usb3 bumper print with TPU 0.15mm QUALITY optional: add a modifier to expose part of the flat bottom surface fill (eg. hexagonal) and remove top and bottom layers
A little stand for a Seagate external hard drive to stop it from toppling over. Can put little rubber feet on the bottom too for extra stability. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2…
So, what we have here is a four tube propagation station for growing new plants. It's a very easy print. It is intended to be used with glass tubes that have a rounded end as there are divots in the bottom section to secure the tube. The…
Introducing our Modern Wall-Mounted Propagation Tube Holder, the perfect solution for stylishly showcasing your plant propagation tubes. Crafted with a contemporary design, this holder adds a touch of sophistication to your space while…
This is a heart shaped test tube stand for plant propagation. Two sizes for different test tube diameters. .80" and 1.00 inch. Print in it's side with supports inside the hole. Quick print!
Fits 6 15x100mm glass test tubes. Printed at 0.2mm layer height at 25% infill PLA. The tube fit should be tight so it doesn't wiggle. I bought the tubes off Amazon…
Plant Nursery for Cutting Propagation This is a plant nursery that can hold and propagate cuttings taken from plants. There are different versions of the pots available, with sizes ranging from 2x2 holes, up to 4x4 holes. I have actually…
Propagation station for three plants. Model is designed for tubes with a round bottom per the divots in the base so they are stable. For a four plant propagation station, check out:…
Herb garden or propagation station. Two pieces with water overflow.
Once I forgot about my basil props for a week 😬😬😬 and the roots grew so thick in the jars I had a tough time pulling them from the prop lid insert without damaging them. This solved the problem!
Print this simple holder to mount your test tubes on the wall for plant propagation - no supports needed. This design works with a 20mm test tube (w/ brim) and scales well for other sizes. Designed to be mounted using a small Command…
Seagate holder for the Model SRD0NF incl. cable
I frequently travel and take an Xbox Series S and portable monitor with me. I wouldn't travel with the SSD attached to the Xbox in case I damage the connectors, but was worried I would mislay the original cover, so here is a replacement…
This is the updated revision of my propagator: I've added a dock that allows manage and get water in excess that may come if you decide not to use it on a planter/soil
All our fresh fish is packaged in the same plastic tray, so I am using them for my propagation stations. Changed the top to have 20 holes and scaled the cup down to fit. Have included the Fusion 360 file. It has a guide I printed so I…
I designed this plant propagation tube holder to look like a science flask overflowing with bubbles! The bubbles also act as a trellis to support the new plant. I designed it to use 1in diameter vials, but the fit is very tight so you can…
Some simple straps that will slide around a Seagate external hard drive and allow you to attach it to the wall. I did this to free up desk space and keep from knocking it over. Print it on its side with some chunky layers. I printed this…
This is an easy-to-print bracket so you can mount a SeaGate “Slim” hard drive to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
I used 4x40mm “Spax” screws. (HDD: STGX5000400) Supports needed: yes
Magnetic Plant Propagator by: David Wiley Things you will need: Test tubes: https://www.amazon.com/dp/B072ZQ4DS9?psc=1&ref=ppx_yo2_dt_b_product_details Strong magnets:…
ROSETTE Radial Propagation Vase – Kit Card Rosette is built around a radial structure that unfolds from the center outward. Flat panels interlock to form a lightweight yet stable volume, defined by symmetry and openness. Designed as a kit…
Agatha (Mary Clarissa Miller) Christie – Buste Français : Ce buste représente Agatha (Mary Clarissa Miller) Christie , l’une des écrivaines les plus célèbres de l’histoire de la littérature policière. Connue comme la « reine du crime »,…
I made little inserts to fit together, but you should also use super glue to glue it together.
The Plant Propagation Station is a set of plant-shaped holders for upcycling spice jars. They are perfect for propagating your favorite plants! Instructions: Print both sides of the model (SIDE A & SIDE B) in your choice of filament. Lay…
A modern plant pot and propagation station, which utilizes a spare 28.5mm x 95mm drosophila vial. Here is an example of where you can get the correct vials ( pack of 100 ). You can also get them in smaller packs ( like this pack of 25 )…
