Counting matching models…
Magpul Rail cover type 2 made in Fusion 360. This works just like the real thing, insert the base into an m-lok slot on your handguard, click in the "locktab" and its done. No extra's needed, only 3D printed parts. And best of all, when…
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
Sussie : Kpop Demon Hunters. Magpie I was going to put this in Myclub but I lost my eye and rushed it and then gave up. So I will leave it here. Lots of missing details… and the legs are cattywampus… the ridge line bothers me. But I just…
Edit 02/21/2023: Added ver.4 & STEP files. Added holes for set screw (M3). Lost original ver.2 so named the updated one ver.2.1. Edit 03/17/2020: Added image with ver.3 Base plate/grip extension for 10 round MecGar 1911 magazines. I…
Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo. The product is made in such a way that no screws need to be used.
Simple print that doesn’t change the way the magazine works except to add some more area to grip. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really…
Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…
Hey Everyone, Couldn't find a Ranger-Styled bottom plate for my PMAG gen3 so i made one. Fits the .223 PMAG perfectly as FDM or SLA print. Print it standing, so the sides where it connects with the mag are extra strong. I recommend resin…
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…
Two versions tactical vertical grip inspired by Magpul modeled to by printed easily in one piece without suport. Need M3 fasteners. Printing "0.20mm SPEED" 30% Infill 4 Parameters (Because of the clamping) Prusament PETG base settings…
10/26/2025 - Edit: Version 2 is now available. The feet extend further forward for better balance and movie accuracy, and the hat is now more accurate as well. The feet, beak, hat, and head are split off from the main body to minimize…
A base model for designing your own inserts for Magpul's MOE M4 Grip. Magpul Part # MAG415. Files include STL, STEP, and F3D. So, go nuts.
Using a mlok rail qd mount, some m4 bolts and nuts, you can now add a quick detachment point for your sling to your Magpul MOE stock. The 3d printed piece acts as a spacer and to increase surface area, the weight and the forces are…
I really wanted to print my own Magpul forend for my Mossberg 500. Unfortunately, my tube was the shorter 6 ¾" length which meant I needed to purchase an adapter or a whole new longer tube. I decided to remix the Magpush by Cursd using…
Holds two CR123A batteries and clips into Magpul MOE pistol grips. Use TPU with 100% infill for the plug. I tried Overture TPU 95A and NinjaFlex 85A. I printed the main core in Overture Easy Nylon and PolyMaker PolyMax PLA. Both worked…
Update 5/28/2023: Replaced drone reed tongue with an improved model with better tone. Quick Start If you don't want to read all the text, the quick way to jump in and have a playable instrument (without the bag) is to just make the…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
Magpul style honeycomb grip. Updated to remove bottom base plate
This is a playable uilleann (Irish) bagpipe practice set. It contains all the printable parts you need to build a practice set. I don't yet have good assembly instructions. Please email or message me if you'd like personalized assistance…
German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…
This is an End Cap for the Magpul BTR arm brace (rifle stock?) Co worker ask me to model this for them. It fit great when printed out of PLA but when i printed it in TPU it was a little loose. Honestly i have been debating posting this…
Donald Linsay designed a mini bagpipe chanter in high G, and I wanted to print it as a practice chanter so I took the top file from Kadaku's practice chanter and resized it to fit, and I also took the printable reed parts to make my…
Replacement follower for Magpul Gen M3 PMAG in .6.5 Grendel. Modeled in Blender, I included the .blend file. Category: Replacement Parts
Limits magpul pmag 10 to 2 rounds
A magpouch for AR-15 magazines to be used with my Moonbeam Mounting System! Attach to a belt, or quickly swap it over to another picatinny rail capable mounting spot! I personally keep mine on a wall mount made with my MMS collection.…
The MMS Stacked AR-15 Double Magpouch! Is the single magpouch just not enough, or you want to carry more mags on your belt? Here you are! Holds 2 AR-15 magazines in one module! Use with the MMS Heavy Belt Module and other MMS mounts for…
The 1911 Magpouch for the MMS Collection is here! A slightly thin, lower profile 1911 Magpouch to be utilized with the Moonbeam Mounting System Collection or your other picatinny rails if you're creative enough! Grab an MMS Belt Module…
BagPack for Gundam Dummy 13 model
This model is compatible with the lego system.
Magpul AR front sight tool, tested to fit Magpul sights, does not fit fixed A2 front sights
This is a digital 3D printable model of Sussie the magpie bird from KPop Demon Hunters . It comes in two versions: one with a hat featuring loops for attaching a real string, and another with the string already integrated into the model.…
Replaces the standard magazine insert in the Magpul GL9 mags for a Glock 19. Reduces the magazine from 15 down to 10 rounds for communist states like California, New Jersey, New York, etc. The floor plate must be epoxied on so that you…
This Flagpole mount allows you to fly your colors without leaving the ground! It is designed to use inexpensive 1.25" Schedule 80 PVC pipe as a flagpole and attaches to a standard 1" RV ladder frame. You can pick up the pipe at Lowe's or…
PMAG GL9 extension. Fits Magpul PMAG. Adds four 9mm rounds to stock mag, with stock internals. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Infill: 35% Filament: Overture PETG Black Category: Sport &…
This is a partial remix of and inspired by u/along_for_the_ride11 's awesome BAK-1 100 Round Holder for Magpul Backpacker X22 that I purchased from them. I have received permission from them to share my variant. Please see HERE to…
I have at least 100 PC cards and I've been putting them in boxes but it's hard to find what I'm looking for. The other day I was watching a YouTuber and noticed he had something holding a bunch of cards so I searched and didn't find…
I liked the idea of a spare CR2032 battery for my Red Dot Sight stored in my AR15 handle so when I switched to Magpul MOE+ I printed an insert to hold one. I made sure both the bottom cap and the bottom and back of the print was smooth…
Convert your Gen 3 PMAG into a 458 SOCOM* mag Replacement follower for Magpul Gen M3 Pmag in 458SOCOM. Modeled in Blender, I included the .blend file. PLEASE NOTE: *This follower will only support cartridge overall length of 2.120 inches.…
Since existing Glock sleeves are the incorrect angle and flare for the magwell, I had to make my own. I started with someone else's model, then created a new one from scratch. The grip now feels like a Glock 17 grip, but with a better…
I was looking for a solution for storing my collection of retro computer cards. With this I can store the cards upright inside an IKEA ALEX deep drawer, instead of boxes of bags. I used…
This is a cheek riser that clips onto the Magpul Zhukov folding stock for AK pattern rifles. It is designed to put your eye in line with a micro red dot optic mounted on an RS Regulate mount. It holds up just fine with light use but I…
Specifically made to fit 1" diameter RV ladder and 2 5/16" diameter flagpole (Harbor Freight flagpole). Flagpole base is obviously for the bottom of the flagpole which clamps and supports the flagpole to prevent sliding. The clamps are…
Extended Floorplate designed for 10rd MagPul 5.56 PMAGs. Offers more real estate to grab onto. Doesn't increase capacity. This model has an integrated plunger for easy disassembly and should be printed in place. Versions available: v1 :…
A free spinning ring to attach to your flag and flagpole so it doesn't get tangled in the wind. Uses an M8 thread if you need a longer screw end.
Magpul PMAG magazine plate model for Glock. Dimensioned and transferred by me to fusion 360.
458 Socom Follower for Magpul Gen M3 PMAG. REQUIRES MAGAZINE MODIFICATION -SEE PHOTOS. This follower is designed to retain the anti-rock nature of the PMAG while allowing for full length 458 SOCOM cartridges. The internal rib inside the…
General: Speedloader for 30 round Pmag magazine. Split in two to allow printing on smaller print beds. Put the magazine into the bottom part. Use the “Pickup tool” to pull rounds directly out of the box. Slide the pickup tool into the…
Děrovaná rukojeť kopie MAGPUL AR-15.
***This is an updated version of the original which functioned perfectly in testing at the shop with dummy ammo, but failed to lock the magazine back in live fire. The changes are small enough that I've not updated the photos, but the Mk2…
Magpul PMAG magazine follower model for Glock. Dimensioned and transferred by me to fusion 360.
A tool to help easily remove Magpul MOE stocks from buffer tubes. This turns an awkward and somewhat painful process into a trivial one.
Description A Magpul style handguard for the WE Apache. Installation You may need to drill out the front pin holes to 6/6.5mm to get a snug fit. I've drilled the left hole out to 6mm and the other to 6.5mm to get a good tight fit. There…
Created this to make custom inserts for holding different things securely inside the grip Included step file so you can modify as necessary for your needs Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Magpul-style honeycomb foregrip. Check out my other models at https://www.printables.com/social/379650-scone-cold/models
Universelle Aufnahmeplatte für den X-Tool F1 mit Pins zum Abstecken von Anschlagspunkten. 10mm Raster mit 4mm Bohrungen
Collingwood Magpies 2023 Premiership Cup
Do not print vertically. Print horizontally or as I did at an angle. This is because if printed up right it will eventually break as the forces are horizontal. This remix includes ribs for better contact.
This model is compatible with the lego system.
AR-15 Magpul One and Six Mag versions. It also works with Lancer/similar mags without a base plate; however, it is a friction hold and not as effective. Allows forward placement of magazine with positive retention. The prints are a better…
you can put the flagpole holder into the rail
Holds up to 5 Magpul magazines that fit 7.62 Cal platform rifles like the AR-10, SR-25 and M110.
This is my first design. You can print it fast (~35 mins.) and it doesn't need supports. No assembly required, print and go for a hike with your little clipper friend :D Printed on NEPTUNE 4+ ; no supports; printed in PLA
Please use petg or abs or asa to print this. It stays outside and pla could become problematic. Use a block of wood and a mallet to drive this into the flagpole. The ribs will shear off and leave a perfect fit.
This is my Harefolk with a bagpipe remix made for a Patreon of #MZ4250 who requested it on the Discord server. This model is free to use for everyone. If you like it and/or would like to help me keep up my cafeën addiction. Please…
Magpul AR PMAG 10 -> 3 round limiter
Simple glock mag tool. Print at 100% with basically anything other than TPU. I used PETG and it worked fine. The AC Unity tool uses a M3 socket head bolt, any length. The OEM / KCI tool uses M2.5 socket head bolts, any length. You can…
Magpul PMAG magazine inner plate model for Glock. Dimensioned and transferred by me to fusion 360.
Highland Bagpiper Gnome Category: Sculptures
I really liked similar hooks on my old Osprey Quasar so I made more of these to use on other bags with bungee cords/webbings. It makes much easier to hang, say, a jacket: just unclip the hooks put the jacket on and clip hooks back. Note…
I wanted to be able to attach/remove my Magpul Picatinny Bipod quickly and without tools, so i came up with this thumb screw and had it turned by a local company. Please note: this is not meant to be 3D-Printed. In a pinch, printed screws…
This spinning flag mount is designed to prevent your flag tangling around the pole. It's a fairly robust design intended for 25mm or 1" diameter poles - a screw is required to fix the parts in place. I prefer to use zipties to hold the…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped just a simple bagpack holder, so it doesn't lying on ground anymore
Very simple and quick prints to protect the connectors on various expansion cards. You may need to adjust scale very slightly if they print too loose or too tight. I don't have any spare PCIe x8 cards to measure with, but scaling another…
I didn't have the magnets from the original design, so I modified it to take 6mm x 3mm/2.75mm magnets. Generally, when you purchase 6x3 magnets they are closer in size to 6x2.75, so please adjust the holes to 3mm if your magnets are true…
The title, but smaller. It's a Ruger RXM Mag Sleeve for a 17rd GL-9 Magpul mag OG model by FeedingBirds4Evah
Just print and glue the correct side of the stand to the ‘Kugelkopf’. The stand has a 2mm part to fit into the inlet of the ball head, the rest of the stand is conical. I just didn't want to waste filament for too much support and also…
This is my over-engineered PCI/ISA/AGP card holder-togetherer. I needed something to hold together four peripheral (in my case, one AGP and four PCI) cards for a computer that lacked a case, but was in use. Other designs I found were more…
This little gadget allows you to use off-the-shelf hardware to make your own monopod for your AR-15/AR-10.
On some cards, it's a bit of a tight fit, but I can always get them in, and there's no wiggle. On the pictures is my first version. I decreased in v1/v2 the height of the slot to get no trouble with resistors on the card. If you have any…
this part is meant to replace the mouthpiece part of the original 3ddrones files, it will require you to remove the pin that's there and then glue this piece straight on, or, if printing the blowpipe whole then you can just attach this to…
This is a simple magplate that i made for my Mp5 mags to make it easier to grab while in the heat of the moment. I have also included a version without the handle if you just want to replace the normal one. For printing i would not…
wanted to use a Peak Design Camera strap as a sling. Designed this for it to go through the magpul sling mount the peak design anchor keeps it in place. I printed this in PETG at 100% infill
You will need 2 neodymium magnets, round flat, the stronger the better, diameter 8 x 3 mm Print Instructions 0,4 nozzle 0,20mm layer height. no supports - I recommend the use of brim pause to insert the magnets (settings in the 3mf file)…
A plate for labeling ammo cans , pops right into place and can be swaped with ease , one is designed for labeling with Brother QL-700 or similar printer 62mm wide labels which fit in between two ridges, keeping them in the center. Now you…
The MMS M1A Magpouch is here! This magpouch is for the box magazines the M1A/M14 uses! Make sure you grab the other things you need with this in the links below! Grab an MMS Belt Module For Warbelt Use! -=|MMS Belt Modules!|=-…
I added the option of mounting a screw.
Limits magpul pmag 10 to 2 rounds
This monopod attaches to the bottom QD socket of a rifle buttstock. In conjunction with a bipod it allows an additional single-legged point of support towards the rear of the rifle to provide more stability for precision shots. It was…
replaces the rings on most flagpoles that break. Print at .6 line width, 4 wall lines, 50% infill
A TPU mag puller for AR15 magazines. Available in two versions, one for STANAG magazines, and one for Gen2 & Gen3 Pmags. Also includes modifier files to add fuzzy skin texture in certain areas. The included 3MF files use very slow print…
I've recently started DMing without a screen for my playgroups. My DM Screen had a nice wooden channel across the top of it so we could easily track initiative order via cards. Since I'm no longer using my screen, I wanted a visual way to…
My design is to add the words in white so you don't pull and attempt an empty mag. Yes, you should mage check prior to load. This way you unload your empty mad facing ‘Empty’ outwards to visibility.
Print the part and insert it inside of the spring and place the factory base lock under it. You can trim the top if nesscesary. I have this one for 10 rounds.
my friend want smaller version so i made it for him :D for bottom pin part ues super glue stick to body and use screw m5x8 or m5x10 or m5x12 just choose once im maybe add more body texture
EDIT: The first test plates i made where printed in PLA… and they would only last about 1-2 rides… Need to try and print them in a different material as the PLA is just not gonna hold up to any kind of usage. Guide plates for Magped…
Simple print that doesn’t change the way the magazine works. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really holding any strain for the spring. Have…
I just print it in the orientation of the STL with supports and 10% infill
