Counting matching models…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
An artistic sculpture. It could act as a shelf sculpture or cool design and acta as a conversation starter. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer.…
124 x182 x 247 mm Dice roller Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: .2 Infill: 20% Filament: Hatchbox PLA, ABS, PETG any Category: Games
this is a multi tool for the respiratory therapists everyday work. It features a wedge to help remove oxygen tubes as well as a oxygen tank tool on the end to assist with the open/close of the tanks. It also features a simple opening to…
This is a replacement Airway Cap for the ACTAR 911 Infantry (infant) CPR training manikin. You can see a comparison of the original piece and this model in the photos. Design notes The overall shape is faithful to the original piece, with…
Are you struggling to find an easy and efficient way to print a disc with minimal support material? Your search ends here! I have designed this disc that requires minimal support material and is effortless to print. If you decide to print…
Designed as a request, I have not printed it. I would print it on its side so the layers are perpendicular to the common stress points. Let me know if it needs to be adjusted.
Print your own 1:492 scale model of the legendary Concorde, the world’s first supersonic passenger jet. Capable of cruising at Mach 2.04, the Concorde could fly from New York to London in under 3.5 hours, cutting typical flight times in…
My son recently started learning the classic song “Stairway to Heaven” by Led Zeppelin and I couldn't resist printing a “no stairway” sign similar to the one featured in Waynes World staring Mike Meyers. No Stairway - Denied! I changed…
A small Toro fairway sprinkler key in poket version. Should fit every Toro sprinkler and can be used on a keyring. Very usefull for a Greenkeeper. I used PETG and 100% Infill. Very easy and fast to print.
Stairway to the tower! I see this as a good stress test I designed this in TinkerCAD. Any feedback is appreciated. If you print this, message me and tell me how it came out.
Improved switches for player board in Yukon airways boardgame Print instructions Category: Toy & Game Accessories Summary Improved switches for player board in Yukon airways boardgame Print Settings Rafts: Doesn't Matter Supports: Doesn't…
This is a real airway (trachea and bronchi) remodeled as a wireframe mesh The airway is from anonymised CT scan data (with consent) Great for display in clinics SLA (big machine) printing is recommended
Stairway to heaven If you like it --> press like it :-) Use tree supports or organic supports to get a nice looking result and play with your settings. I scaled it to 150% and used support_material_contact_distance_z to have a good…
This is a replacement Triple Action Airway for the ACTAR 911 adult CPR training manikin. You can see a comparison of the original piece and this model in the photo. Design notes: The overall external dimensions are the same as the…
Remixed from the cricothyroidotomy trainer from The Airway App and a couple others.
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Two different eras of British Airways livery included Latest one, after major rebrand Classic one from the 90's Base included so you…
This is a replacement part for a broken original. No reinforcements were added. I used a caliper with 10 microns precision to measure the dimensions and built the 3D model from the original using Cadwork. I printed this piece using two…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Base included so you can print others and create your own desktop organizer of favorite airlines. A version with a hoop for keychains…
Print with openings to the top and bottom (rather than side-to-side) to avoid using supports. A padded base will allow opening to remain whereas a raft will close up one end of the airway. Initial photo is in progress, updated photo will…
Reducers and reducer-splitters for PVC/vent-hose, originally designed to attach to an AC Infinity butterfly backdraft gate for attaching to multiple 3D printer enclosures. R4: Only 4 way splitter. Experimental. Supportless attempt. All…
Stairway to haven is a playful plant support that can easily be built the way you like and want.
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Base included so you can print others and create your own desktop organizer of favorite airlines. A version with a hoop for keychains…
This model was inspired by the constant innovation of mankind, we never stop the climb of reaching the top. The binder jetting part can be put on any of the stairs, depending which one looks the best in the eyes of the receiver. I made…
I wanted a nice way to display my headcovers but couldn't find one online so I designed these. The clearances are very tight so sanding may be necessary. This model is for fairway woods, I also have models for drivers, hybrids, and…
"Stairway in Bloom" – Artistic Floral Bookmark Bring your reading moments to life with this stunning "Stairway in Bloom" bookmark—an elegant blend of nature and imagination. This intricately designed 3D print features a dreamy staircase…
British Airways logo for office or workshop
A math sculpture - replicating shapes in a spiral. Print Settings Rafts: No Supports: No Resolution: Hires Infill: 16% Notes: This was designed for no supports. Category: Math Art
This is a replacement stairway for the Playmobil police station
keychain of Stairway to Heaven - Remaster Led Zeppelin IV (Deluxe Edition) second place of Rolling Stones Top 100 Rock Song Print Settings: Layer height 0.3 mm Nozzle 0.4 mm PLA Black to code bar PLA White to base keychain Use PrusaSlicer…
A simple set of stairs for a photo prop.
Credit goes to cgw3737's coworker who made a sketch of this cube. I wanted to see if I could also make the 2d sketch 3D like cgw did here: https://www.reddit.com/r/3Dprinting/s/0OLfzTGCNr but made some changes to look exactly like the…
This piece was designed to add to a high fidelity Laerdal manikin to reduce the amount or chance of the air passages becoming dislodged. YouTube link available to show install.
According to the PDGA technical standards, a mini must have a circular shape with a diameter of 7cm to 15cm and a maximum height of 3cm. Many materials, such as plastic, wood, or metal, can be used to manufacture a mini.…
🌿 Ascension Vine Planter: Geometric & Modular Designed in SolidWorks | Perfect for Vining & Trailing Plants This unique planter features a captivating design with vertical, lattice-like structures radiating from a central base, creating a…
A wireless video laryngoscope for airway management training, so that a whole group can watch the intubation on a phone or tablet at the same time. It is built from a cheap WiFi endoscope camera (about 50 EUR) whose complete electronics,…
This is not real medical equipment and must never be inserted into a real patient ! It is a rigid 3D-printed simulation prop intended exclusively for healthcare education, demonstration, and training. If you appreciate my work, consider…
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
See also: German Blog-Post by my partner in crime Josias This model demonstrates two things at once: In unconscious accident victims, the airways can become blocked if the tongue muscles go slack: the tongue slips into the back of the…
Hi, this is 3D Oberarzt. Let me introduce probably the most complicated 3D model I have ever attempted to actually print - human lungs, precisely bilateral pulmonary veins, arteries, airways, all connected to the heart as the central…
Print yourself a piece of a legacy, a 3D Logo of the historical airline known as US Airways! A logo after years not yet forgotten, still holding on strong!
Lock for Child Safety Gate for Stairways or Hallways. The lock that comes with the Gate is made of hard and brittle plastic. So, when it sticks out in a hallways and something hits it, it breaks easily. It can also hurt someone passing.…
Hi, this model is based on a real human chest CT ( the CT is publicly available as a part of the Medical Segmentation Decathlon, Task 06 - Lungs, volume 45), size is 1:1. The model depicts the heart ( without individual chambers), aorta (…
This is not real medical equipment and must not be used on real patients. It is a 3D-printed simulation prop intended exclusively for healthcare education, demonstration, and training. If you appreciate my work, consider supporting me by…
Required adapter ring to securely connect the NASCO LF03593 component to a Laerdal BLS Junior manikin.
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
This piece was designed to add to a high fidelity Laerdal manikin to reduce the amount or chance of the air passages becoming dislodged. YouTube link available to show install.
Print yourself a piece of a legacy, a 3D Logo of the historical airline known as US Airways! A logo after years not yet forgotten, still holding on strong!
Reducers and reducer-splitters for PVC/vent-hose, originally designed to attach to an AC Infinity butterfly backdraft gate for attaching to multiple 3D printer enclosures. R4: Only 4 way splitter. Experimental. Supportless attempt. All…
This is a replacement stairway for the Playmobil police station
Wall mount and holder for Harmar stairway lift remotes. Print as oriented.
you just need some M3 screws 10 each M3x6 and 6 each M3x2 you can print 2 solid treads or mix it up with the open tread and holder
It's a dice tower. It has an internal spiral stairway. It's very loud. Print without support (because you won't be able to get them out). Make sure your overhangs are dialed in and print with layer height of 0.15mm or less.
Stairway for slicer layer height testing, steps are not multiple of a layer height
160mm wide, 218 mm deep, 80 mm high The spots for the 5 glasses are 40mm deep. The walls are 3mm thick. There is place for 5 sunglasses. Printed ist with silk pla. 0.4 Nozzle, 210/60 Degrees 245g Filament, 10.5h
Print in PLA or PETG, no support necessary. I used 1% Gyroid infill, and would recommend a minimum of 4 walls for strength.
