Counting matching models…
The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…
This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) where well worth the effort. The bait is printed in two halves and then glued together. (I used super glue) Three small…
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
Original part : https://www.thingiverse.com/thing:4946522/files Enjoy
The Wraith FPV Drone This is a 4/3.5 inch drone frame. Mine is printed using carbon fiber PA6 nylon for the body and ABS for the top. I'll list out the specific electronic and mechanical hardware that I used below. This list will also…
3D Printed Mini Glidebait Fishing Lure The lure features a two-piece jointed body that creates a smooth, natural swimming action when retrieved. With a slim profile and slightly curved shape , it mimics a small baitfish, making it perfect…
This model can be printed in 1 part or 2 parts. 2 parts uses much less plastic because of no supports but it is a hassle to glue together. Enjoy! Cover Photo by @Roiku
This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…
This lure Prints in one piece and has multiple hinged segments that loosen up once the lure is bent back and forth a few times. This gives it a swimming action and it has internal chambers for adding metal bbs for rattles.This lure prints…
Straight from the Empire’s ranks, the Mini Stormtrooper is here—small, detailed, and ready for your desk or keychain! Designed for multi-color printing, this model features clean details and simple supports that are easy to remove. Inside…
This is just another Crankbait I made.. this one a redesign of a lure I carved out of balsa wood 25 years ago. I'm still working out the best infill settings so this is a* "Work in Progress" * for now. I did a short write up on my website…
To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Easy fishing form / mold for 16cm fish 6mm screw holes 8mm cutout for eyes Enjoy
I like how Ace_D remixed the Switch portrait holder with the comfortable grip. However after printing his design I found several issues. The right handle is largely separate from the center piece. The console fit is very tight. There is…
Spyro the Dragon rendered 3D model from the "Spyro reignited trilogy" in a sitting pose / waiting pose + Keychain buddy version. I was asked: "Hey can you make a smooth and compact pose for the use as a key-chain buddy". The blender…
This lure is my go at a 3d printed jerkbait which sadly are very rare to find on printables or thingiverse. I designed this off of the Westin Swim and gave it the same details. I would be very happy about some makes or even fish you…
Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…
3D printable mold to pour silicone 9cm Westin clones YOURSELF! No supports needed. Would recommend ABS/ASA at the minimum to ensure quality pouring without destroying the mold. You can print either the master itself to make your own mold…
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
Printed lying on its face. 3 walls and 3 top/bottom. 15% grid infill. Very solid, but the pin version isn't great imo. For V2 you will need supports as shown in the photos.
This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…
Easy mold for your lure have a nice day by water Enjoy
All 78 Cards converted to .stl files. unchanged they measure 37x65x1mm with 5min/2gram for 1 card all together the stack should stand at 8cm high. Use your cards wherever you want since they are waterproof when made from plastic :) The…
This is a model of Final Fantasy 7 Cait Sith in simple polygon form. I printed this model at 15% scale. The wings and the cape are too thin to print. So there is another model that is just the wings and cape (that is already scale to…
NOTE - This is a failed project! I'm giving up on this design and moving on to other things.... I'm leaving the files up just encase anyone else is brave enough and wants to experiment with it. This is a Realistic Sunfish Jointed Swimbait…
Krait MKII model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
This is a little “bait can.” It's about 58mm tall and 100mm diameter. The lid has holes in it for the little wormies. I have also included an alternative lid (shown in orange) that is a little easier to operate, and has larger/more…
My Youtube channel: LuresForAll https://www.youtube.com/@luresforall/featured You can watch me assemble it here: https://youtu.be/SQy0jy8JkJ4 You can watch me paint it here: https://youtu.be/DinvIs6oJjI You can watch it Swim here:…
Introducing the 3.5-inch Swimmin' Frog Open Pour Bait Mold! Designed with meticulous attention to detail, this mold from TheMakersWorkbench and Making Baits is a must-have for anglers and DIY bait-making enthusiasts aiming to create…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is another lipless rattletrap type crankbait I designed. This is a little different then a normal type lipless lure as I tried to make the body a little wider in hopes it would maybe dive a little deeper or have a different kind of…
This is my model of the Wraith Hive Ship from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the…
The Double-Sided Spinner Bait Tackle Box has two compartments with lids to store 15 lures with a max length of 95mm. The compartments are designed to securely hold and protect each individual Spinner Bait from damage or tangling. The box…
To assemble: Print the model. Glue 3 or 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the line tie and hook hangers.…
Ground bait ball maker Its quite important to have your bait on the right spot when fishing, with this tool you can make round balls from your (moist) ground bait or soft pellets. Fill up the ball maker and compress it. The slot in the…
FREE 1-page Glide Guide (recommended before your first swim test) Want the Top 5 tips to make your first glide swim right? Grab the FREE 1-page Generic AF Glide Guide → https://mailchi.mp/a695a4acc986/pr-glide-guide (Instant PDF + if it…
I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…
First try designing a fishing lure, been making them for years from wood, but decided to model one, so everybody could use it. -it is wire trough lure, made for 0.8mm wire -i haven't printed it yet(I'll update you, as soon as i make it)…
This is a remix of my Realistic Sunfish Jointed Swimbait Fishing Lure. I'd given up on that design but after learning about printing on fabric and making several other swimbaits that worked I'd though I revisit this design one last time.…
Support me on Patreon and gain access to my full collection, which includes pre-supported files, modular kits and more! patreon.com/PrintedEncounter
Fishing 14.5cm twister lure form / mold
easy printable mold for 9cm fishing lure 6mm screw holes Enjoy
~75mm crank bait in 4 pieces with wight/sound chamber. Print the following pieces 1 x Left 1 x Right 2 x Pin Add wire to hold hooks, glue, ad the right size hooks and go catch the big ones! and to add the extra toch, paint it in your…
Ants-Be-Gone parametric model was created in OpenScad using the BOSL2 library . The design is inspired on an existing commercial solution, Ants-No-More ®. All dimensions were based on the product descriptions that I've found over the…
Here you can print and assemble a grate fishing bait boat. This filles contain all printed parts models, main code and other files, for full assembly you need to buy additional parts. In my example i use a ESP 32 cip, and a custom board…
This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to duplicate it in CAD for 3D printing. There are two versions of this one... the first one I printed looked awful skinny so…
Simple top filling mold for new rubber bait a simple way to recycle your old and torn baits, just put your rest of baits to bowl and put it to microwave, then just pour that rubber to this mold, we are using abs or nylon bacouse of heat…
check out the new version link -100 percent infill -glue tail on to body
This is a bait station for insects, in other words, a container that houses insecticide or poison in a way that's attractive and accessible to insects, but less accessible to pets & other wildlife. I was prompted to design this station…
This is my model of the Wraith Dart from Stargate Atlantis. The model is a kit and does not require any glue. It fits through my Pegasus Space-gate so you can nicely recreate the scene of it comming out of the gate. I really struggle with…
Holds your Dyson Airstrait securely on the wall. Easy print, no support needed.
This is my model of the Wraith Cruiser from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the Wraith…
Like me, if you dont have time, or just not enough filament, just use the smaller Temptowers. Based on the "All in One Temperature & Bridging Tower - PLA & PETG GCode included" from Tronnic, and the remix “Prusa Mini Temptower for PLA,…
easy printable practical fishing lure mold / form for 5,5cm rubber fish
Easy to print mold for your own fishing twister lures Enjoy
It's autumn and the mice are heading back inside. Time to give them a treat. This mouse bait station will hold bait up to 30x30x60mm. I print with supports only on the hooks that snap the top to the bottom. The rest of the overhangs print…
Improved large levers and switch addons for the Logitech/Saitek Throttle Quadrant. Inspired by Diamond DA62. Print the levers twice for Twin Engine, Small Lever can be used for brake or speedbrake. Optional Switch addons (for flaps, gear,…
Rats are crazy smart, and the success of a snap trap is often determined by the angle from which the rat tries to take the bait. This housing forces the rat to come at the bait from the front, putting it in the optimal position for…
Fishing lure / mold 13cm twister with belly 8mm eye cutout screw hole 6mm Enjoy
Easy to Print You may need to add a brim if you have bed adhesion issues 200mm size and a 400mm size in 3 parts
3 Colour ‘Filament Painting’ model - Op-Art White Tiger Portrait, made using Bambu filaments. (I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill,…
I've wanted a trim wheel for flight sim stuff for years but the old Saitek model isn't made anymore and examples on eBay are rare and cost a fortune so I decided to make my own. This is built with an Arduino Leonardo, some 3d printed…
A container with a lid for use with Nippon liquid ant killer gel. There are two types. One design with a screw lid and another with a push-on lid. Both seem to print well for me. Dispense a small amount of ant killer gel into the base,…
The holder sticks best if you coat the back with silicone and stick it to a smooth tile e.g. in your bathroom. It can of course also be fixed with screws, but then two additional holes must be drilled. Printed with supports because the…
This is another swimbait that I am working on using the same fabric printing technique as my last swimbait. This one is modeled after a rubber minnow swimbait so it only has three sections. More info and build pictures can be found here…
Printable fishing mold for rubber fish (Top filling) Enjoy
Designed to work with the ARKON Drill Base Tablet Mount from Amazon located here, https://www.amazon.com/gp/product/B00PZZYR4K/ Extra hardware required 2 x M5x40mm Button Head Cap Screws and nuts 4 x M4x8mm Button Head Cap Screws and nuts…
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
3 Colour ‘Filament Painting’ model - Op-Art Zebra Portrait, made using Bambu filaments. (I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal…
This is an Ultralight Swimbait that is designed to entice almost any type of fish. The swimbait 2 ¾ " long and is my best design yet. I have tested the stresses and have found that it can hold about 15lbs (6.8kg) max as long as you print…
! Flexible materials are suggested ! Scalable +50% infill Supports needed Painting is suggested Add supports as shown below
My first atempt, its not perfect but on right way. Added holes to screw in mini hook holders. And there is 3x8mm holes in middle of body sections if needed to add more weight with steel balls, weight can be added manualy in the middle of…
C'est un remix j'ai ajouté 2 oreilles pour la stabilité.
Overall length: 230mm Please model the lure vertically. It is already jointed, so please model it as is. There is a weight room in the width section. Use M3 nuts and M3 screws. The dorsal fin and tail fin should be modeled with TPU.…
My take on the shield as shown in the BBC show “The Traitors”. Has a hole at the top for threading some string to. The details on the inside of the shield prints separately, requiring it to be superglued into the shield. The holes are for…
Caitlyn From League of Legends Figure (w/ Stand!) Extracted from the game
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
This is a free low-poly model of Wraith from Apex Legends! Shop full quality 3D prints at https://www.etsy.com/shop/LootDrop3D?ref=simple-shop-header-name&listing_id=892108206
Krait Phantom model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
This model is similar to my shiner swimbait but it is based on a actual lure. I designed this model only using Fusion 360. I like printing all my lures in 0.1mm because they don't take too long to print and it gives better looks. Once you…
These Ultralight Crankbaits were inspired by rallekralle11's tink crankbaits they are just a little more stream line but being so they don't have as much action (wobble) as his. They still work great and I caught a ton of Bluegills and…
Wraiths Second Heirloom from Apex Legends the top and Bottom can be printed then Glued Together theirs two indents which i wanted to use as guides when gluing but in the end its just easier to hold it together for a while
To assemble: Print the model. Glue 2 - 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the joint hardware, line tie and…
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
A cute, waiting low-poly kitten that's quick and easy to print. The low-poly design also gives it a modern and elegant look. You can find his sibling model "Cute Sleeping Low Poly Kitten" here:…
Easy printable dragonfly form / mold for fishing Enjoy
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…
after my cat got into this station, I would now recommend my own from-scratch redesign, with a clip-on lid . — Strictly speaking this is of course not a trap, rather a bait station, i.e. a small container to apply poisonous bait for…
This was made for a friend who broke their rudder pedals. Successfully printed and used with ABS Pro with 0.1mm layers and 100% infill . It might make a difference to organise the infill layer direction to run parallel with the critical…
This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…
Fishing lure / mold 18cm nymph for predator fishing 6mm screw hole Enjoy
