Search results: aldis

ALDIs NUTS cart coin

Never lose your cart quarter again!

Aldis Quarter Holder Keychain

Aldis Quarter Holder Keychain: For anyone that never has a quarter for the shopping carts. Advised to Print in PETG Settings I used: 0.4mm nozzle 0.2mm layer height 3 Perimeters The rest, Default Prusaslicer PETG settings

Stealthburner toolhead Haldis Red Lizard K1-UHF

Stealthburner toolhead for the Haldis Red Lizard K1-UHF. This is a Rapido style hotend which can be found at Aliexpress . It features a 115W heater while still fitting the regular Stealthburner front. Rapido speeds for a lot less $

Voron Stealthburner haldis red lizard hotend mount

This is a hotend mount for the stealthburner made for the 'red lizard' hotend from amazon.

Dr. Sezieren Valdis Desk Model

Mod to use Hotend Haldis 3D Red Lizard Q1 V6 for Voxelab Aquila S2

With this modification you can install this Hotend without problem in a Voxelab Aquila S2, additionally you must change the layer cooling duct

Huskarl Valdis - The Eightpints Gilded Legion

Alright, you mugs, listen up! You're thinking of betting against Huskarl Valdis? Look at her. Her authority isn't from some dusty god; it's forged from a million paid contracts, melted right into that magnificent armor. She doesn't fight…

Minimus 4020 Fan Shroud For Haldis 3D Red Lizard Q1 V6 Hotend

I moved the 2 locking posts down 5mm to get the ducts up higher than the nozzle. plus widened the guts out a little to fit the wider hotend.

Haldis 3D Red Lizard K1 hotend silicone sock mold

My original sock got caught on a print and tore off. Wasn't really useable anymore so I had to toss it. Klipper started throwing errors anytime I tried to print at higher temps with a cooling fan on so I needed a new sock. It's a pretty…

Stealthburner toolhead Haldis Red Lizard V5 PRO

Stealthburner Toolhead For Haldis Red Lizard V5 PRO clean, without hole and fitting for adxl

Haldis Ender 5+ direct drive extruder mount

I purchased a Haldis extruder as an upgrade to the stock Ender extruder. The only down side is the Haldis isn't a direct swap for the stock extruder. I wanted to use the Haldis extruder in a direct drive upgrade but couldn't locate a…

Remix of "Remix to use Haldis 3D Red Lizard Q1 V6 Hotend on Aquila S2"

Well, this is a remix of the adapter used here (https://www.thingiverse.com/thing:5258445) to attach the Haldis 3D Red Lizard Q1 V6 Hotend to the Voxelab Aquila S2. The model i made is essentially the same from the one remixed but i had…

SV08 dragon style Volcano hotend mount (Haldis Red Lizard K1 & Others)

I made this mount to adapt a Dragon style hotend to my SV08. I used a CHCB type heater, but a CHC tube style also works. The Stock hotend uses proprietary parts and in my experience is prone to heat-creep. This mount has a separate block…

Haldis Stealthburner Haldis K1-UHF vulcano

What's an UHF without a vulcano nozzle? This model works just like the Rapido UHF, which uses an extender (expensive nut) for higher flowrates and properly heated filament.. In order accomondate the longer length I've adapted the model of…

Skaldis Filemant Spool Holder (Center and Adapters)

Adding a center piece for the original model. This can in combination with the adapters used to hold multiple spools per printed part. The bars used have a diameter of 18mm (smaller can be created on request), but I used a wodden bar cut…

Bl/3D touch mount for Creativity/Haldis 3d e3d v6 clone

This is a bl touch mount for Creativity/Haldis 3d e3d v6 clone. I made it since coudent find a mount for it so i made it.

L-Mounting Plate for Creality Fan Cooling Kit with Haldis Ender-3 S1 Linear Rail Kit

Bought the Creality Fan Cooling Kit and realized that I can't mount it on my printer as I have modified it with the Haldis Ender-3 S1 Linear Rail Kit. So I decided to create a simple L-mounting plate for it to slot and secure below the…

Ender 3 S1 CoreXZ Haldis x-endstop Adapter - Haldis Linear Rail Kit

X-end stop adapter for the stock Ender 3 S1 X-Endstop for the Ender 3 S1 CoreXZ modification. The updated V2 will work with the stock set up with sprite.

Ikea Skaldis Bean Can Holder

What's the filament-stingy way of getting more storage? Reusing an empty can of beans of course! A quick and easy way to hang a bean can on an Ikea Skaldis board. I printed mine in PLA+ and it's been sturdy so far. No support needed, just…

Haldis 3D Red Lizard Q1 V6 Ender 3/CR-10/ Shroud and fan Duct

The default petsfang needed a lil modification to work with the red lizard q1 v6, i installed this on both my ender 3 and my cr-10 this was a great hot end! like all great hot ends make sure you properly install it/assemble or you will…

Ender 3 S1 CoreXZ Haldis x-gantry assembly - Haldis Linear Rail Kit

Modified X-axis left and right assembly bases to fit the Haldis linear Rail kit replacement x-axis gantry. You will need the top part of the right assembly and the top part of the left assembly along with the rest of the original STL…

MamutTH-Haldis TZ E3 ***UPDATE-2025***

This project was initially intended to be for Ender 3 style with Linear rails on X (MGN12). in Part cooling duct you must cut the support after printing :) Currently, I abandoned the Ender 3 printer after mods and built my own machine…

TOBERA 3010 | HOTEND FROG EXTRUDER | HALDIS 3D

Esto es una tobera para poder utilizar el ventilador de capa que trae esta extrusora.

TOBERA 4020 | HOTEND FROG EXTRUDER | HALDIS 3D

Esto es una tobera para sustituir el ventilador de capa que trae dicho hotend, gracias a esto mejoramos enormemente las impresiones.

Angled cooling fan mount for the M6 extruder by Haldis3D

I bought the M6 extruder from Haldis3D to upgrade an old Ender-3 to direct drive. I had to design some sort of way to mount a 4010 blower fan to it, as the extruder doesn't include any part cooling solution on its own. This solution…

Aldis Cat House Reinforcement

The cheap cardboard cat house I got at Aldis was starting to give so I made some reinforcements for it. The back corners are pretty chunky and take too much filament if I was to redo this I would just print the front corners for the front…

Haldis 3D Red Lizard Q1 V6 Ender 3/CR-10/ Shroud and fan Duct for Orbiter 2.0

This might sound dumb but i just marked the orbiter 2.0 with a pencil on the PETG after i assembled it. then i drilled a few small holes and screwed in my m3 screws. follow all print settings for petsfang Category: 3D Printer Parts

Haldis Lizard Hot End Adaptor for DDX V3 Extruder

I couldn't find a download so I drew it up. I know if fits most older Creality printers, probably several others

Haldis Stealthburner Haldis K1-UHF vulcano

What's an UHF without a vulcano nozzle? This model works just like the Rapido UHF, which uses an extender (expensive nut) for higher flowrates and properly heated filament.. In order accomondate the longer length I've adapted the model of…