Counting matching models…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee or sending…
Descrizione Un revolver futuristico dal design aggressivo e ricco di dettagli, pensato come modello 3D da esposizione, cosplay o collezione. Il look unisce linee meccaniche, superfici scolpite e uno stile sci‑fi/gotico che valorizza molto…
A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…
Printed with highest quality variable layer height and supports for the thumbs and folded fingers. Hand model was remixed and mirrored from here: https://www.thingiverse.com/thing:2265516
A hair tie holder that can be an altar/statue devoted to a feline divinity in fantasy games. My daughters tend to misplace their hair ties all the time, maybe this will help leave them in one place. Suitable for tabletop games. Created so…
I created this bracket to allow for a large gpu to be installed horizontally. Mounting wholes are sized to use fan screws to attach to the P3's frame.
This is not all of the ACC Teams - as people request the additional teams I will do my best to respond. I will fill in the missing teams as they are requested - Enjoy! All gcode files are setup for manual color changes
I did not like the orignal hdd cage of this case. Also it offered only place for three 3.5" hard drives and it was hard to access the drives. As I am using this case as a server, I wanted quick access and place for 4x 3.5" harddrives. In…
📝 Description Step into a sanctuary where time fractures and silence whispers. This highly detailed model depicts a monumental altar dedicated to the ancient Cthulhu — surrounded by columns, symbols, books, skulls, and three vigilant…
A representation of what could be a school of the wolf meditation altar from the CD Projekt Red video game The Witcher 3. Print instructions IMPORTANT There is only one piece that needs a few small supports in the arc4 file, All the other…
These are curved models of the bracer plates that I made. In my case, I mold them in rubber and then cold cast with aluminium powder
Installation and assembly depicted in the above video. Thermaltake Core P3 TG Pro only comes with a single fan mounting bracket. I used mine on the side of the case and wanted to limit the amount of dust coming into the case from the top.…
Altavoz amplificador pasivo para el smartphone. ACTUALIZACIÓN! V2 V1: Con soporte para estantería. SALIDA + CODO + BASE MOVIL GRANDE (O PEQUEÑO) V2: Modelo simple, sin soporte para armario. SALIDA + CODO v2 ¡Ninguna pieza necesita…
Hi , reworked an old piece from my archive into something suitable for printing. final print volume is 13x13x21 cm / printed with PrusaSL1 STL files are just ready / with support and without support. vines are fully optional / see the…
un plato para regar cualquier tipo de planta simpre que quepa y se puede hacer a altas velocidades.
🇲🇹 Merħba Malta! Welcome to Malta! This stunning model full of detail was created by Dany Sánchez , available in the following versions: Complete Split in 2 parts, for faster printing, or print at larger scales The Cittadella , also known…
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al sumergir la pieza de cerámica en el esmaltado y evitar marcarla con los dedos.
This was designed specifically for the Thermaltake Tower 300 Computer case to stop your fingers and cables from getting caught in the fan blades when taking the top panel off. This can also be used for the optional rear fans connected to…
I made this model in order to keep using my old case, the Thermaltake Versa H17, but with my new processor that produced much more heat (i5-12500). However, the stock H17 is not a very good case in terms of airflow, and there are…
This is my latest version of my radiator bracket for Thermaltake Core series chassis. This one should allow you to mount a 360mm X-flow radiator between two posts of your Thermaltake Core P3. It should work on any side of the case you…
Alter Retable. Museum in Nowy Sącz, Poland. Fixed up. The original was very topsy turvy so I straightened things out while trying to keep its original (what I figure) intent. Added UV texture with displacement in Blender. Fixed in…
Altair - Assassins Creed https://linktr.ee/blenkhorn3d See my Linktree link above for shortcuts to the following: 3D Model Request Form Patreon Exclusive Models Instagram More!
Thermaltake Core P3 5.25 Vertical Drive Bay Print Settings Print with the bottom side on the build plate (for orientation see P3 Dual Drive Bay.3mf). Needs lots of supports
Thermaltake Core P3 120mm Fan Mounts. Use rubber foot screws to secure.
Thermaltake Core P3 PSU Cable Cover
Replacement snap-in feet for the Thermaltake Core V21 PC case. The original ones just snap off when you try and move your case without lifting it up. I created these to replace them as I couldn't find any existing replacement designs and…
This bracket for the Thermaltake Core P3 with the curved or flat glass side panel allows an additional three 140mm or 120mm fans to be mounted or any 120mm, 240mm, or 360mm radiator at the top or front of the case. The only other parts…
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al
Printed without supports, 20% infill, 0.12 layer height. Original feet have a little rubber/felt pad glued on the bottom, transfer it across or replace it with a new one of a similar height or things won't be level.
Soporte para celular, Imprimir son soporte.
Twelve sacred remnants scattered across no man’s land. This set includes 12 printable terrain pieces: battered censers, makeshift altars, shattered angel statues, bone-laced banners, and field shrines forged from ammo crates and rubble.…
Check out this detailed dragon bust model! Sculpted with intricate textures and powerful expression, this dragon's piercing eyes and snarling snout bring it to life. From the rugged horns and scales to the subtle contours along its face,…
This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…
Mounting bracket/arm for fans or radiators for the Thermaltake Core P3 chassis. There are 2 versions depending if you are mounting a 120mm or 140mm type of fan or radiator: 360mm mount (slimmer) (For 120mm Fans or 120/240/360mm Radiators)…
I created this model for my cosplay of Altair from the game Assassin's Creed. print parameters: PET-G material, infill 25%, perimeters 5
I recently built a new PC in a Thermaltake Core P5 case. As you can see in the pics on the website and my ‘before’ photo, you can see the power cabling easily. I have the case mounted to the wall behind and above my monitor, so this…
Another fantasy ruin modular set, this time for a place of worship, an altar (intended to dress up the Oculious Temple set). I wanted a fun focal point, and always really envied the classic terrain set that was the Arcane Ruins. This is…
Simple 3d model of the Altar of the Fatherland (Victorian). The National Monument to Vittorio Emanuele II or (mole del) Vittoriano, called for synecdoche Altare della Patria, is an Italian national monument located in Rome, in Piazza…
This is a 3MF file containing all parts of the original Daltanious 3D model, conveniently organized by color group for easier printing. The model was created by reza_aulia, and I have not modified any of the parts—this upload simply…
This pair of brackets will allow you to suspend a U-flow 480mm radiator between two of the window-mounting corner posts on your Thermaltake Core P5 chassis. They should allow you to place your rad on the top, either side, or even the…
An 8 bay 3.5 inch HDD enclosure designed around the Jonsbo N3 backplane which can be purchased separately for ~€15. I have also Included a mounting piece for the Thermaltake CoreV21. The main assembly is fastened to the mounting plate…
A stone altar. In ancient times these structures were used to worship God and were structures to make offerings to signify faith. It is designed to print without supports. If you collect or download, please "Like". Print at the highest…
gancho perchero con 2 orififcios para los tornillos alta resistencia
Da das Gummi bei meinem Schltknauf abgebrochen ist habe ich eine neue abdeckung designed. Diese Passt in die Version ohne den Plastikrahmen welcher sich unter dem Zebrano Holz befindet. Ich fahre einen w201 190E 2.0 118 PS Baujahr 1986.
While this is registered a s a remix, it is actually a completely new set of models with STEP files included. There are two versions. The threaded version is designed for use with standard g 1/4 fittings for water cooling. The three small…
Updated to have better socket retention and more solid clip engagement. This is an ATX 24 pin bulkhead pass through for the Thermaltake Tower 900 case. For securing ATX 24 extension cables. The rubber grommets from the Tower 900 case can…
A wonderful place to sacrifice, uh, things to the sun god. Tree supports recommended. For tabletop gaming maps. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I designed this as an altar to hold the Helm, such that its magnificence can be properly beheld by all in attendance. Took almost 20 hours to print at 0.08 layer height and 5% infill, but any less would be an affront to the Helm. Has the…
This is a grommet insert giving you a bulkhead that will accept two 8-pin ATX power connectors. Either EPS/CPU or PCIe are compatible. This secures the cable and gives it a very clean look. The design allows you to run extensions from…
Original model from the Everquest Mass Multiplayer Online Role Playing Game (MMORPG) extracted from the EQG files. Great for use in miniatures, tabletop RPGs, 3d modeling, reminiscing about an exquisite game... whatever your heart…
3D model, hardware description and arduino code to make your own Altair 8800. Feel like Bill Gates in 1974!!! More info Github: https://github.com/Menyiques/Altair8800 Printable using MMU2 or by filament change.
This is a simple model that needs to be printed in multiple parts. The middle left and middle right parts are not required, but provide added support for the middle portion of this model. Glue for Box Left & Right is recommended. AutoGen…
The shell insect neopteran Altaroth are “ Insects that widely inhabit many areas. They absorb fruit, mushrooms, and honey, and then carry them back to their nest. Materials can thus be collected from their swollen abdomens, whose color is…
The war never ends – and neither do its sacred remains. Following the success of the first set, Relics of War #2 brings you another dozen battlefield relics, forged from devotion and desperation. This pack contains 12 printable terrain…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
A fun crown for your IKEA GESTALTA. Best printed in very detailed mode! 0.1mm or lower! Make sure your printed doesn't string for best results! I used the Prusament Blend Viva La Bronze PLA for a clean gold look! Also check out the IKEA…
Este soporte para altavoz bluetooth evitara que salga rodando y se nos caiga. En concreto es para un altavoz de marca Rienok.
Porta nella tua collezione un modello che punta tutto sulla qualità di stampa. Questa elegante statua elfica è progettata per esaltare ogni minimo dettaglio: dalle pieghe morbide del tessuto fino ai lineamenti delicati del volto, ogni…
These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…
My son wanted a cool feeding station for his Crested Gecko, Leroy Jenkins. His terrarium has a Moai head in it which he crawls on, sleeps in and generally poops all over. To keep with the Easter Island theme, here is a nice altar-looking…
This is a cover for drive bays on a Thermaltake Armor computer case. I designed it specifically for this case (which is rather old now), but I'd be willing to bet it works with other cases too. It might take some slight x/y adjustments in…
Headset hanger for Core series cases with the glass or Plexi. I used supports and you can print at whatever resolution you want.
Gehäuse für HomeMatic HM-LC-Sw1-PCB Funk-Schaltaktor 1fach. Zum Fixieren wird eine M3x5 Schraube benötigt. Ich habs mit PETG gedruckt…
I always jump at the chance to design and print something from scratch. So, the moment we received our order, I got to work. The parts are retained near the back with two thumb screws, and there is a ridge to keep them from falling out.…
This thing must be printed twice. It's symmetrical and must be used in a pair. It should allow you to mount a 420mm radiator to your Thermaltake Core P5, by "bridging" it between two of the corner posts.
Note: I specially designed this to lock in place using old springs that you've likely got lying around from replacing weak print-bed springs, or the spring near your extruder knob. Smaller springs can be used (I'm using a combination of…
🇲🇹 MALTA 🇲🇹 If you are Maltese, a vexillologist (look it up!), have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you! This is not the actual flag of Malta, but the…
Modelo original inspirado en una de las tradiciones más representativas de México. 🇲🇽💀🌼 El diseño incluye diferentes elementos característicos de una ofrenda de Día de Muertos: Flores de cempasúchil Papel picado Calaveras decorativas…
I made these to cover some gaps I am not using.
Original camera mount for Reolink Altas PT Ultra camera is made from metal. This is plastic replacement. I did not test it in outdoor yet :-) NOT TESTED OUTDOORS yet! Use some outdoor strong fillament (PLA is really bad idea). I will made…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Parrilla Altavoz Edifier Voronoi
Robagon 's model is probably the most common alter for Gloomhaven but has no hole for the magnet, so I just placed a hole for my 6x3 magnet, and it fit nicely. I used 15% Infill and used a height range modifier in PrusaSlicer to change…
The tiny version. So tiny a dwarf could get it into his shoe. Print FULLsize for a very tiny SpinalTap-Henge for your desk, or scale it down to 50% to wear it as a charm for a necklace.
This is the Spicy Coaltana from the video game Grounded 2 (its design was updated from Grounded 1, so now both versions are available in my Grounded collection). There are two versions, with and without the ribbon that trails from the…
Infernal Skull Throne – Dark Fantasy Display Statue A towering demonic skull altar forged in darkness and flame. This highly detailed statue features massive curved horns, heavy chains, jagged spikes, and a glowing infernal core that…
A simple adapter for an Aquacomputer D5 NEXT pump on the mounts of the Thermaltake 900 Tower. I use them with two layers
Simple Model of the pendant from Daft Punk Thomas Bangaltar
I designed this after breaking my original headphone holder and I decided i was tired of the usb cables just laying around after i unhooked my headphones, so i added a little hanger for the wire as well.
Public domain female anime model by splatypi . Originally uploaded to Blend Swap .
I've had a Core P3 for a while and have been pretty unhappy with the GPU riser situation. The included 8-slot bracket causes you to either have a modern (ginormous) GPU right against the case glass where it can't breathe, or further back…
Wanted to share my first remix of another user's model, in the form of “Altair's Short Sword". The original model has great detail, but I went and made a few adjustments to make it easier to print. Gary's original model had no visible way…
Los bajos se refuerzan , pero sigue siendo un altavoz de 2", con los graves de 2", pero le sacamos todo el rendimiento que puede dar. Está pensado para un altavoz bluetooth redondo que he readaptado y con bateria de litio 18650, pero si…
Cover for Thermaltake Armor (old case) 5,25 slot. Hope, it will fit (dont have a 3d printer yet to test it :-)
Mongolian woman - Breathe of the Altai Twilight
guy from apex, posed with mixamo and blender printed with default settings and organic supports file is a little broken, please share if you fix it
Fantasy Altar Slab Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Fantasy Items here: https://www.printables.com/@StudioMechanik/collections/2975356
Just followed tutorial from Prusa newsletter. Split into two pieces and trimmed to a hexagon with 3D Builder. It is scaled 1.5x in Z, too much more looks unrealistic. Pardon the sloppy print! Print Settings Printer Brand: Creality…
Data source: eu_dem_v11_E40N10 Copernicus Used qGIS and DEMto3D plugin vertical exegeration at x10
The tiny version. So tiny a dwarf could get it into his shoe. Print FULLsize for a very tiny SpinalTap-Henge for your desk, or scale it down to 50% to wear it as a charm for a necklace. Category: Props
Compatible with any EK-D5 pump that has 34x65 mm mount. https://www.ekwb.com/shop/ek-revo-d5-pump-mount
I wanted to use only 1 fan for my mATX server build to be as quiet as possible. Therefore I wanted to mount the original 200mm fan above the motherboard in addition with the Alpine AM4 Passive cooler (…
For this model you will need an assorted set of M3 bolts, nuts and a few washers (or you can print spacers but I didn't). The pics are quite dusty but that's just proof that it works. Printed: 1x Grill_Frame_All 2x Mesh_Grips_Sides 1x…
This is a quick mount I designed to mount the pump / resevoir of the EKWB fluid gaming set more to the top in my Thermaltake Core P5 case. The Mount uses only hardware that is included with the fluid gaming set and is pused into a hole in…
Altair 8800 Simulator Enclosure - Altairduino If you've ever wanted to relive the glory days of the beginning of the home computer revolution, this project is for you. The Altair 8800 was announced in the January 1975 issue of…
If used as an coaster print it completely solid so no liquid leaks inside it
This is for the Thermaltake Core V21 as a customizable badge for the front panel. I created a Noctua for example but this base is good for you to put anything on. It takes a 10x1 mm magnet in the whole in the back to stick to the case.…
