Counting matching models…
General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. The NSU Ultramax camshaft drive operates with 2 push rods, which rotate on eccentric disks. Details you can find here:…
OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…
General This Ultramax camshaft drive system was uniquely applied to NSU vehicles, mainly the NSU Max motorcycle. From 1952 to 1963, approximately 160,000 motorcycles were made with this system. Two rods rotate on eccentric disks. All…
Gengar Gigantamax in a Swamp (Pokemon) キョダイマックス ゲンガー MMU Multi colour part design Category: Sculptures
Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
I wanted a small but simple keychain, this one is slim and not too flashy.
Charging stand with built-in cable for Lamax BCool watches
Print with more durable material than PLA... I recommend ABS, ASA or preferably Nylon
My phone did not fit in the Dynamax walking pad so I made a stand for my phone.
My Anycubic Kobra Max printer had to be placed on a table “sideways” so the build plate action moved left and right when standing at the table looking at the printer. This orientation placed the arm for the filament spool hanging off the…
Brita Ultramax 18-cup Pitcher Riser Updated files for Prusa Printers statistics
Print the other side in the mirror. You will need additional two 20mm spacers. In theory could be used on other frames with front spacers of 20mm. Camera angle is at 25deg.
Amaxinno freestyle frame - vtx pigtail holder at 45º Made this for a friend to use on his 5" frame. Design with the rear/back divider/plate in mind. No supports are needed. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts:…
Replacement for this rod you need to lock the Hamax Caress (and possibly other stuff?) to your bike. I lost mine for some reason, so remodeleted the original one from our other bike in SolveSpace. It prints rather terribly due to the…
Z jedné sedačky se nám ztratil, doteď tam byl klacek, funkční, ale ne moc elegantní. Vymodeloval jsem dle originálu, vyzkoušeno, sedí. Tisknul jsem z PETG, s podpěrami. Na fotce je výtisk i s originálem
Amax F5 - Vista Antenna Protection with ELRS
Platform that fits under the Brita Ultramax dispenser. I added caster wheels to the bottom to allow the water dispenser to easily be moved around countertop or slide back and forth on shelf in refrigerator.
inserts to fit duramax storage bins from Dollarama (canadian store) , similar to some tackle boxes. designed in fusion 360.
my handle broke so i deigned the new part to fix it. just mirror the file to get the left and right side please printed in petg supports 100% infill
Box for Lamax W9.1 camera One extra battery and two MicroSD card holder
Držák pod kapotu auta (originálně pro Toyota Rav4 5. generace) pro plašičku kun Deramax-Auto. Parametry pro tisk: Materiál: ASA Perimetry: 5 Výplň: 15% gyroid Montážní detaily: Díra na úchyt je na M10, ale přikládám M6 redukci. Horní díra…
My child bike seat footstrap broke after 2 years of usage, and I took the chance to put my new skills in OnShape on my service designing the spare part. I designed two versions: original version: like the original one in all it's…
You want a little bit of flex in the material, so I printed this in PETG
Clip de remplacement du harnais de siège enfant Hamax. Testé sur le modèle HAMAX KISS. Impression en ASA ou PETG - Impression à plat avec support pour que les couches soient correctement orientées pour une meilleur résistance. - hauteur…
Gigantamax Garbodor from Pokemon Sword and Shield made in Nomad on an iPad because my son decided he loves this big poison pillow.
Lamax WatchY4 Play (children's smart watch) charging stand 2 parts: Charging board Stand You have to glue the stand to the board. Printer: Ender 3 V2 neo PLA Creality White 0,20mm Normal 15% infill, 3 perimeters Nabíjecí stojan na dětské…
This is for what is apparently the older design of the UltraMax, with a print in place door. I have updated the file so the door opens beyond 90 degrees.
This is a simple riser for the Brita XL Ultramax (27-cup) filtered water dispenser. My original design was to add a slight lift for the dispenser to clear the lip of the shelf in the fridge. The riser fits under the filter and slots in to…
Úprava filtru Aquael Versamax FZN 2 o hladinový sběrač (sběrač použit z Sunsun JY-02)
Simple fuel cap to help prevent filling fuel tank with DEF. After my buddy destroyed his 2500 HD from doing this very thing, I thought to make this to help prevent the same accident. Others are available on Amazon etc. This doesn't have…
Description Simple but effective protector that goes over the quick mount and prevents it from being scratched or damaged when switching wheels. Background After only two short tours we already had some damage made to the quick mount by…
A handle broke off of my mop, so I designed a new one. The top was not printed out correctly on my Ender 3 so I cut it out.
I´ve created a mount for tbs vtx antenna pigtails, Fr-Sky R9 T-antannas (maybe tbs T-antennas will fit too) and hglrc ublox M8N GPS module (many other will fit too). The GPS-Module can be tied with a small ziptie. Print Settings Printer:…
I like the simplicity of the nobufil spool holder, but it is no wide enough for some of my spools thats why I modded it for wider spool and created a stand for when I dont have fiting cardboard at hand.
About: A small box the perfectly fits the instamax pictures! with opening on both sides the pictures are easy to get out! Now with an display on the front (or back, what ever you like). Were you can slide in a picture to show! Also with…
Hamax - Support pour Siège enfant - Child seat support
This is a dummy cover for the EGT sensor harness on the LMM Duramax (2007.5) Printed in TPU it fits tight and probably has a watertight seal on it's own. I added some dielectric grease to keep the harness dry and dirt and rust away from…
Battery-pad for the Amaxinno freestyle frame Print Settings Printer: Renkforce RF2000 Rafts: No Supports: No Resolution: 0.25mm Infill: 100% Filament: sain smart TPU Category: R/C Vehicles
Jednoduchý kĺbový záves slúchadla na Lamax Base 1/ Simple joint handset hinge on Lamax Base 1
I was tired of spilling remaining fuel when using Flo N Go DuraMax fuel tank. So I designed cap for it to prevent spills. Version_1 uses printed O-rings with files provided. Version_2 uses standard 20x2 O-rings. PETG use is highly…
Dieses 3D Model ist ein Ersatz für den Original Etiketten Feststeller für Datamax Eitketten Drucker. Er kann einfach aufgeschoben werden ohne Schrauben-befestigung. Um die Festigkeit etwas lockerer einzustellen, kann die Größe um 0,2-1,5%…
Nenasel jsem jiny misto v motorovym prostoru tohohle auta, kde: Plasicka bude dobre pristupna (je nutne cas od casu menit baterii v ni) Bude mirit, v ramci moznosti, do motoroveho prostoru Nebude tam nikde prekazet. Je potreba: 4x tavna…
Duramaxx Mountee bicycle trailer shaft bushing replacement. The original one gives a fairly loose fit, so i designed this one as a replacement. The mountee is a typical "cheap" bicycle trailer sold on ebay, amazon etc. for around 100…
I needed a simple way to mount a fish finder to my kayak. The models have to be printed together. Printed out of CF petg. Use toilet flange bolts for the t bolts.
At the Vancouver Hackspace Jon & I recently organized two "build your own quadcopter" classes, with 10 students in each class. This is the frame we designed and laser cut for the kits. It is provided here so that you can build your own by…
I´ve created an ESC-case for the 8mm arms of the Amax freestyle 10 frame and the Furhling32 32Bit 35A ESC. Some other ESC´s will fit too if they ar not bigger. Print Settings Printer: Renkforce RF2000 Rafts: No Supports: No Resolution:…
I created this to physically move the labels 2.6mm over to match the left edge of the label on the bartender software at work. This now allows us to center the labels in the bartender software instead of having to adjust them to try to…
AMAXinno freestyle 5'' new frame's shoes 2 version for each arm / 2mm thick & 1mm thick (base) Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0,2 Infill: 100 **Filament:** sainsmart TPU…
Holder/tool to use Zebra Thermal labels with a 25mm core in a Datamax / Mito DMX-I-4208 printer. The original holder is too large to fit the Zebra 25mm labels. Print two times, one left and one right. Category: Other
When installing a FAAS Titanium lift pump in my 2006-2007 Silverado 2500HD Duramax I noticed the brake line was rubbing the back of the Wehrli bracket. The factory Green clips that held the brake line on each side of the pump were too…
Actionpro X8 camera mount with 30° uptilt for the Amax freestyle frame. Print Settings Printer: Renkforce RF2000 Rafts: No Supports: Yes Resolution: 0,25mm Infill: 100% Filament: sain smart TPU Category: R/C Vehicles
Při výměně baterie u reproduktoru vždy praskne spodní přítlačný kroužek. Tento model ho plně nahradí. Z druhé strany nejsou 4 dírky na šroubky. Je potřeba je prošroubovat. Raft není potřeba a podpěry dle uvážení.
bude pasovat i na jine chytre hodinky pro 16mm reminek pridana verze pro 20mm reminek
Support de sonnette pour siège enfant Hamax Buddy J’ai conçu un support en 3D pour ajouter une sonnette sur le porte-bébé Hamax Buddy. L’objectif est de permettre à mon fils d’avoir sa propre sonnette et de s’amuser à dire ding ding…
there's a lot of people complaining of the same phantom rattle in the doors on fb groups and forums with no answers. I made this and tried it and it got rid of the aggravating rattle in my doors. hopefully it will help some of you get rid…
These are some paint mask pieces I made for someone a while ago (files are dated) for different duramax aftermarket intakes/pieces. (lol someone just handed me the parts and I did my best to understand which engine each was for, but…
Simple fuel cap to help prevent filling fuel tank with DEF. After my buddy destroyed his 2500 HD from doing this very thing, I thought to make this to help prevent the same accident. Others are available on Amazon etc. This doesn't have…
This model solves a niche problem on your Brita's spout being too close to the lip of your fridge's glass shelf. As a bonus, it also makes sliding the pitcher around on the shelf much easier! I printed them in Bambu PETG-HF and they have…
Jednoduchý kĺbový záves slúchadla na Lamax Base 1/ Simple joint handset hinge on Lamax Base 1
Krytku jsem vytvořil kvůli ochraně objektivu kamerky, se kterou nebývá zrovna šetrně zacházeno ;-) Tisknuto na hrubé straně PEI; TPU - 40D; Skin 0.3;0.3
My child bike seat footstrap broke after 2 years of usage, and I took the chance to put my new skills in OnShape on my service designing the spare part. I designed two versions: original version: like the original one in all it's…
Narychlo jsem vytvořil tento model držáku, protože nebývá v sadách s kamerou a někdy se hodí. Je potřeba zapnout podpěry. Postačí mřížka. Tištěno z Aurapol PETG, standartní nastavení.
Screw mount wall and desk hangers designed for Duramax stackable storage bins. Duramax is a brand sold by Canadian store Dollarama. Parts are designed to be mounted with countersunk #8 screws. There are two models available, one short and…
I was quite bored with sound quality of my speaker when standing on 1 side. To prevent speaker roling around like a turd in the wind I created this stand :). Stand was made for 10.5 diameter speaker but should fit similar devices. 0.25…
Replacement tab to open/close the water spout. My brother's was broken so I made a replacement.
This is a 3D printable adapter designed to hold a sponge pre-filter media securely within Aquael filter systems (notably Ultramax and Turbo series). It allows easy insertion/removal of the sponge while ensuring proper alignment and water…
This is a replacement part for a Remington VersaMax magazine tube cap. This is the cap that holds the magazine spring in place. I designed this shorter than the original in the hope that I might fit another shell in the magazine. I also…
After losing a bolt handle I decided to make a spare. I ordered some 5mm diameter round rod from MMC and cut to length. I filed a notch similar to the original handle. That gave me a round rod sticking out of the bolt. So I printed a…
Vehicle visor clip for Instamax Polaroid photos. Print the clip on edge for strength and the photo holder standing upright with no supports. Walls should be set to 4 in PLA. The clip gets inserted into the slot at the top with a small…
NEW AND IMPROVED MODELS & SOURCE FILES AVAILABLE IN MY REMIX HERE! This model solves a niche problem on your Brita's spout being too close to the lip of your fridge's glass shelf. As a bonus, it also makes sliding the pitcher around on…
This model solves a niche problem on your Brita's spout being too close to the lip of your fridge's glass shelf. As a bonus, it also makes sliding the pitcher around on the shelf much easier! I printed them in Bambu PETG-HF and they have…
I used: 3 Perimeters 30% infill non organic suppors (propably did not needed)
Maybe, you have to use a little bit of oil to move with parts.
This is a locking pin for a Hamax bike child seat, might be compatible with other like kiss or caress. Edit July 2023 : Added potential v5 for Caress model with rotated head and a groove on the whole length, untested.
Simple gear replacement for the Sony SL-2500 - one of Sony's Betamax players with an overengineered tape load mechanism that tends to break. Specifically, it has two plastic gears that take most of the load from the mechanism movement and…
The camera fits well, no additional strap is needed, but you can use it for safety, e.g. protection against losing the micro SD card. Other FPV stuff: Alien 5" GoPro mount Alien 5" action cam mount Alien 5" GPS mount Alien 5" Legs Mobula…
This is an HD camera mount for Amax 5/6/7 Freestyle frame. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: Fillamentum Flexfill 98A TPU Red Category: R/C Vehicles
Remix of @xanatorium_151557 Amaxon spool holder stand https://www.printables.com/model/416761-amaxon-basic-spoolholder-stand-based-on-nobufil-sp : added M8 holes to mount it on an extrusion or elsewhere made it a bit more lightweight and…
This design is an axle/wheel upgrade for the standard Duramax tank replacing the stock wheels (which I found to be SHIT) with a robust solution that actually works. Printing It’s a straightforward, I printed mine in PETG. To build this…
This mounts as a 1st part of filter intake. 62 mm total length, 40 mm inside sponge length, 18 mm diameter. PETG is recommended.
About: A small box the perfectly fits the instamax pictures! with opening on both sides the pictures are easy to get out! This is my very first make so feedback is highly appreciated! :) Print Settings: Layer Height: 0.2mm Wall Thickness:…
Krytku jsem vytvořil kvůli ochraně objektivu kamerky, se kterou nebývá zrovna šetrně zacházeno ;-) Tisknuto na hrubé straně PEI; TPU - 40D; Skin 0.3;0.3
Gigantamax Gengar (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
Gengar Gigantamax (Pokemon) キョダイマックス ゲンガー Multi colour parts body printed in Esun dark blue Category: Sculptures
A simple mount for Smart/Cateye rear LED light on Hamax bike child seat using a single zip tie
Držák se přidělá na madlo sedačky pomocí tří stahovaček - v modelu jsou připravené otvory. Vhodné pro klasické PET-lahve do 0.75l Tisknuto z PETG pod zarážku jsem dal radši podpěry, přeci jen má úzkou základnu… Holder is fixed to the baby…
Printed with Fillamentum FlexFill 98A TPU. I used PrusaSlicer presets for this fillament.
it is a front and back piece that holds the metal grills Print Settings Printer Brand: Prusa Printer: I3 MK3S **Supports:** Yes Resolution: 0.2 **Infill:** 60% Filament: FilamentPM PETG Category: Audio
