358 models
'Making of' video: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the steamroller and the egg was each designed to be print-in-place without any need for support structures. The…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for PETGSource material: PET
These are simple shamrock-shaped glasses to show your St Patrick's Day Spirit!
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
If you like it, please give me a like.
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
A replacement air vent tab for Toyota Camry 2002 - 2006. Installation. Just push it on to the vent, then push up the blade up to click it into position. Not sure if that made sense. Print instructions Print it "sideways" so that the…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Shamrock display for St. Patrick's Day.
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Designed this good luck pig as a present for my family and some friends just in time for new year's eve. I printed this in grey PLA and painted it with acrylic paint. I made a 9mm hole for some gift ribbon and labels with PrusaSlicer. The…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
This pendant is derived from Barbara Pierce's shamrocks . I designed it in preparation for a kids' party because the store was low on St Patrick's Day necklaces. As for the small metal keyring that attaches the pendant to a string of…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Shamrock (trojlístek)
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Just in time for St. Patrick's Day - here's a shamrock for your fish tank! This shamrock is fun for your fish to explore and makes your tank more festive. You will need to print two things: one shamrock, and one base. The hole on the base…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
This Lucky Charm you can print with an MMU-printer , it is easy and fast to print and not much filament is needed. I use “Prusament PLA Galaxy Green” for the leaf, “Prusament PLA Blend Oh My Gold” for “2026” and for the ladybug I use…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
I designed this set of diffusers to fit directly around the bumper of a Toyota Camry between the years of 2007-2011. Make sure to apply a couple coats of clear coat to protect it from the weather. I applied it with JB Weld and magnets to…
Print approx. €26.09–€31.88 excl. taxPreliminary estimate for PETGSource material: PET
I like HamRadioDude's wire winder design, but wanted band numbers on the winder to indicate what it's tuned for. Haven't printed this yet but you may want to add minor supports at the bottom for the numbers.
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
GlamRocker Figurine with servo in the back. also included the figurine without the servo
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is a small shamrock with a 2mm hole on the back for sewing it onto a knitted hat. Printing I printed it face down, single color, no support, with PLA. The layer height should be a small as your printer can handle for the fine detail.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Another Tolkien-inspired bookmark, which was technically an attempt at two-color printing. The *.gcode file contains the
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Did you break the battery clips on your Toyota HYQ12BDM key fob, making the battery pop out and rendering the key fob buttons useless? Don't spend hundreds at the dealership getting a new key, print this part in five minutes! This little…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is a modified version of Official_Dino55's Glamrock Freddy Head model. I added a hinge for the jaw and widened the neck hole to make the model wearable. The hinges only require two skateboard bearings. Rubber bands can be added to…
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files
This is an AIM-120C AMRAAM at its true size of 12 feet long. Scale in your slicer to what size you choose. I printed a 4ft tall, 1:3 scale model which I will be hanging from my ceiling, along with a 1:10, 14in tall version for my shelf.…
AMR DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . V2 of this wheel is…
Created a shamrock for some St. Patrick's Day decorations. Simple model made in Tinkercad with slight editing. Resize and print to your desired depth. I made the Z axis about 0.5 inch so it could stand up on its own. No supports needed if…
Print with supports on, since quite a bit will be floating 20 mm off your plate. Or flip the shamrock to be on the plate and most printers can probably handle it without supports. I printed with 10% infill… pretty much anything should…
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files Update 11.06.2023 -Addition of corrected files with joints assembly
Swirly shamrock to stand on a table, mantle, or shelf for St. Patrick's Day. Prints face down and should be scalable to whatever size you desire to match your decor. The “Flat” version doesn't flare out at the bottom if you want to hang…
Now you can print the star of the show! This is a detailed, fan-art figurine of Glamrock Freddy , the leader of the band from FNAF: Security Breach . Unlike the others, Freddy is here to help! This model captures his friendly but imposing…
Print in place articulated flexi shamrock to play with or give as gifts for St. Patrick's Day. There's also a version that can be worn as a flexi shamrock necklace to add to your celebratory St Paddy's Day garb. Prints in place with no…
Flexi Articulating 4 Leaf Clover or Shamrock Keychain for St. Patrick's Day I wasn't a huge fan of the other flexi/articulating clover keychains I found on here, so I decided I would try to make my own. This is one of my first experiments…
Just for fun, some print-in-place shamrock garland to help get your home or office in the St. Patrick's Day spirit. Prints in place without supports. Printer should be able to print with 0.4mm tolerances for pieces to move freely right…
A tabletop shamrock i made for my office, while we were producing an irish themed game 🕹
Maqueta del Aston Martin de F1 2024
Well known czech railway vehicle
Insert a pause to put in the fishhook earring. It will depend on your layer heights, so you will need to experiment. The earring loop has a diameter of 4mm. I would iron the top layer, unlike me!
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Sure, here's a brief overview of the 1930 steamroller "The Old Smokey" in English: "The Old Smokey," built in 1930, is a historic steamroller…
Update: Added 120mm fan version A revised version which enables 120mm case fans to be mounted as lid has been added. I ran this setup with a fan powered by the AK2 Plus board directly for over a week without any stability problems. Read…
Easy to print, no supports ✅ 4mm hole for keychain 🗝 For the best results, use matte filament 🔥 (or better yet, two-tone matte filament like mine). If you look closely at the clover leaf, you'll notice that the layer lines are not…
AIM-120A A scale model of the AIM-120A split into logical parts for easy printing Print instructions and assembly Print the different parts in your desired colors and glue them together. No need for supports. Dimensions Length: 458 mm…
Happy St. Patrick's Day!
Solid shamrock earrings for St. Patrick's Day, measures approximately 36mm x34mm. Grab your DIY jewelry kit and make some holiday earrings!
A keychain shamrock. There's also a model without the hole, so it can be used as a ornament.
Small shamrock book mark, use pause at layer to add the white border. Ender 3 Pro 0.12 layer ironing
Drum Key This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gein53MpBsu Category: 3D Printing
🍀 Happy St. Patrick's Day! 🍀 These adorable, happy shamrocks can adorn your keys, as a keychain, or hang from your ears, as a pair of earrings! Are you interested in selling your prints of my designs? Join my Printables Club , and start…
Add supports 15% infill print in place
Spruce up your St. Patrick's Day table with this festive swirly shamrock napkin holder. Holds napkins or anything else you feel like placing within it. Sides A & B press fit together for me when printed on the Bambu X1-Carbon, but feel…
Mark your balls with some luck. 4 leaf clover shamrock style. Use a sharpie or similar. Ultra Fine point tip for the stem.
Designed with 1mm tolerances. I printed in PLA with either forest matte green or silk gold. Approximately 3.5" overall and ¼" thick.
4 Leaf Clover Coin (Shamrock) created from the http://www.fontspace.com/fonts-n-things/clover-things font which authorizes personal use. Tinkercad file can be edited at https://tinkercad.com/things/fuayB1Vt4aY Experiment creating 3D…
☘ Knitted 4 Leaf Clover Shamrock Keychain ☘ Join my Patreon for a commercial license and more models! https://www.patreon.com/Smoggy3D
Isolator for Hamradio Antennas
a simple model I made to give as gifts in ramadan, as well as a very simple holder
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
Cute St. Patrick's Day T-Rex holding a shamrock. Print with PLA, no supports needed.
Print in place chainmail fabric prints with no supports, no brim, and multiple sizes to choose from! There are 15 different sizes from 2 x 2, up to 12 x 12, and various in between! Print with standard 0.2mm layer height and… 🍀 Happy St.…
This roughly 1/12 sized amraam missile takes model rocket engines. If you are putting the engine in the middle of the hollow missile to connect them, then make sure to either print in ABS or line the inside of the rocket with aluminium…
It’s time to eat! This is a detailed, fan-art figurine of Glamrock Chica , the energetic guitarist and pizza enthusiast from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project for any…
The STEP file contains three sperate objects which are separated by a small (0.2mm) gap. When printed separately they nest together for me with just enough friction to not slide out. I printed the inner and outer in a forest-green PLA and…
Make way for the winner! This is a detailed, fan-art figurine of Roxanne Wolf (Roxy), the fierce and competitive wolf animatronic from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
This is a set of two printable Ramrods, one for the Talon Claw and one for the Caliburn. These are printed flat to improve durability compared to vertically printed Caliburn/Talon Claw Ramrods. When installing, have the side of the ramrod…
🍺⚽ 🇮🇪 Celebrating St. Patrick's Day 🍻🍀💚🧡 Print this decoration and hang it on a door or wall This disc has a Celtic knot design of a 4 leaf clover. It comes with hoops so you can tie a string, connect it to the small 3 leaf shamrock, and…
A model of an air to air missile, the AMRAAM (AIM-120), made by me :)
Halloween 3 Season Of The Witch Pumpkin Mask With Silver Shamrock Tag
3 piece Shamrock earrings for St. Patrick's Day. Printed with .6 nozzle, but a .4 would be better for detail. Buy a jewelry making kit from somewhere that has the ring links, or make your own!
The 24mm(.9 inch) shamrock earring\charm size can be printed in around 7-11 min depending on your speed settings! Can be resized to any size within the slicer, no 3d modeling or parametrics required! No supports needed, but 5mm brim is…
MODEL DETAILS A St Patrick's day themed model with some hidden details! There are some challenging overhangs and detailed parts, but it is designed to be printed without any support material. If you liked this model, why not try out our…
Fits 2001-2006 year model with alloy wheels. Printed PLA+. Tight fit, press in then give a light kick.
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
Celtic Shamrock Coin 2 inches in diameter Category: Other
Now you can print your very own Glamrock Freddy! This is a detailed, fan-art figurine of the star animatronic from Five Nights at Freddy's: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
This model is not my original creation. Unfortunately, I am unable to provide a source of origin.
Happy St Patrick's Day! Update 2024-02-23 I added more preset hinge clearances for this print-in-place design. They range from 0.1 to 0.6 and should provide plenty of options. If you wish to scale things up in your slicer, you'll want to…
A very functional pen-holder in time for St. Patrick's day. Print it in 3 perimeters or higher. happy printing! :) Lá Fhéile Pádraig sona duit.
Englisch: These are sticks with the clover leaf symbol that can be used in a flower pot or as food sticks. Deutsch: Das sind Sticks mit dem Kleeblattsymbol die man in einem Blumentopf oder auch als Essensticks verwenden kann.
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
Celtic Knot Shamrock coaster Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: Any PLA, PETG Any Category: Office
Adapter for old Tamron Adaptall 2 lenses to be mounted in new canon EOS DSLR. Tested with two lenses. The adapter is keeping the aperture lever pressed, so you have to dial and keep the aperture on the aperture ring. No electronics.…
Beautiful silhouette of the Aston Martin formula. Suitable, for example, for hanging or just displaying. I also recommend it as a gift for formula, car and other lovers. Beautiful print! You can scale as you like, but don't scale all axes…
This remix contains all 8 variants of the boltbase (locked, unlocked, nut, no nut, left and right) with ramrod as .stl and .step. It can be printed without supports. I printed it for my Cynthia build and I still put the O-ring that…
Print base and clover. Pieces snap together with my FDM printer. Glue optional. If they are too tight, try printing the shamrock 2% smaller or lower flow. Horizontal expansion settings may also be useful in getting the fight ‘just right’.…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an LED / neon sign shell designed as minimalist Shamrock. The LEDs I used are (affiliate link) Lamomo Green Neon Lights . For…
Eight shamrocks featuring some traditional Irish phrases, and some common day sayings as well. The lettering is raised 1 mm on the design to allow for a simple color change. The shamrock's step file is included so you can personalize the…
I am happy to share the IC705 Cover here for other radio amateurs! I recommend printing it in PETG in case it gets a bit warmer in the summer, but PLA will also work if it's not in the sun or a warm car. 73! Please only for yourselves and…
These St. Patrick’s Day shamrock earrings feature a graceful swirl pattern woven into each leaf, giving the classic clover a fresh, decorative twist. The flowing curves are a fun mix of playful and polished. Perfect to dress up or wear…
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
Parkside PPAMR 1250 A1 lawn mover robot boundary pin. These are hard to get and only 15 pins in set. Two versions: pin_plain - there is a need to use red sticker tape or multicolor print. pin_body + pin_red_stripe. Just print red stripe…
This Lucky Charm was designed as a small good-luck symbol for the New Year and St. Patrick’s Day . It is perfect as a decorative element and can be glued onto other objects to turn them into a personal good-luck charm. Dieser Lucky Charm…
Shamrock heart decoration. I printed in green PLA with standard slicer settings and it turned out perfectly! No supports needed. PETG for direct sunlight could be an upgrade. No supports needed. I printed mine at 400% scale to make a door…
heroes of tamriel the breton from skyrim
Layered fidget in the shape of a shamrock or clover. A fun fidget for kids or party favors. Printer: FDM printer Material: PLA filament Nozzle: 0.4; 0.20 initial layer height; optimal temp for your PLA (see manuf. details) Infill: Density…
🍀✨ Shamrock Storage Box – Lucky Clover Trinket Box | 3MF Digital Instant Download Celebrate luck and charm with this adorable shamrock storage box ! Perfect for storing trinkets, small keepsakes, jewelry, or even using as a festive…
It's pretty hard to print, use filament that allows for easy support removal like pla or abs. The model with a hole is for a switch 20mm hole, 23mm external diameter.…
I added a raised edge to the design by tom janssens. Its design was already very good as a urine shield. But our cats like to dig out the litter box, and this raised edge means that this is also a thing of the past.
A Simple and easy Shamrock keychain, to celebrate the Saint Patricks day
Connect your headset to your TRX. All connections fit into this small box. The box fits nicely on the side of the TRX. Holes are 6mm and 8mm offset. Holes for magnets are 10 to 1mm. If you have any questions you are welcome to write. Vy…
I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use "add-a-circuit kit" in instrumental panel fuse box as its lid sits too close to the fuses. I've found the euggie 's design , but decided to create a…
We remixed the FixemDude Swirly Shamrock to make it a Fridge Magnet. Needs 6mmx3mm circular rare earth magnets. All rights owned on the design by Fixemdude. Please post your makes on the original design page here…
Let your toys celebrate St. Patty’s Day with a little flair with these Shamrock Glasses. There are long and short arms for those with ears, an armless one for those without ears and even one for those with 4 eyes. They print quick and…
Shaheen - 67 AAMRAM Desktop Model
I initially tried to print Виталий Лукин design, and discovered that it doesn't quite fit my Shaw Litterbox(one of the multiple names with which you can find this Smart Litterbox on the market) as the tolerances on the section that fixes…
LCD Frame for Wolf-2Pro Hamradio Transceiver uses 4x 4x2mm magnets
![Alternative Case for AK2 Plus Intel N100 Mini PC (Firebat, Kamrui, NiPoGi) [Updated 120mm Fan Version]](https://media.printables.com/media/prints/926938/images/7229417_abf8bd94-445d-400a-9f74-0e1abaf2ebbb_0b6333b6-85d1-470d-b564-e040aaa0a8b8/ak2-plus_case_120mm_main.jpg)
