Counting matching models…
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
🌀 Fidget Spinner with Planetary Gearbox (Double Helical Gears) Description: A stylish fidget spinner combined with a functional planetary gear system. It features six planet gears rotating around a central sun gear, all enclosed in a ring…
Another in the series of rotating gear toys. Now I have twisted the helix of the gear 4 times. The width of the spinner is 70mm and the height is 18mm. It is printed Print-in-place. Nozzle 0.4 mm, layer height 0.2 mm Many other spinners…
!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! F14 Tomcat This is another plane for your collection : the F14 Tomcat. This kit is…
Author: Emmett Lalish & ShawnGano Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Waste object (with wipe into infill) is pliers by…
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
10-inch patch panel with 12 keystone module space. It's designed and created with OpenSCAD. The standard unit width is 44.45 mm, but to save some space for my very small network rack, I used 30 mm. You can change the module_count variable…
Also tested with other charging ports Inspired by the box openers
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! B17 Here is the first aircaft a the set : the famous world war two american bomber :…
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! E3 Awacs This is another plane for your collection : the E3 Awacs, which is a detection…
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds! It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big…
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
This is a clip shape Filament Cleaner. There is only one parts print. no magnets, Insert pieces of sponge in each side for pre usage. Print settings: Filament: PETG, PLA Layer height: 0.2mm Supports: no Perimeters: 2
Magnet based on the US Air Force B2 Spirit airplane. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
Hooks for acoustic panels with a width of 13mm and a groove depth of 10mm. The hook is self-clamping on the wooden slats.
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Fokker Dr.I This is another plane for your collection : the famous Fokker Dr.I, which…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Fouga Magister Here is the first aircaft a the set : the famous fighter of the…
Watch it fly here: Pls sub
Fits a Type I Outlet. This is modeled after a 15⁄16" Female ACME. This should fit barbecue grill cylinders manufactured after October 1994. I printed with PETG 0.15-0.20 layer height.
This is my version of a 3D printed clock. I designed it entirely in Fusion 360 and it has now been running for a couple of months. Time keeping is very accurate. It uses a Nema14 stepper motor, a TMC2208 driver as well as a Wemos D1 mini…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Spirit of St Louis This is another plane for your collection : the incredible Spirit of…
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose…
Since I only have hozes with the "Gardena" couplers, I remixed the original design and added the coupler. I advise to print it with the 5 nozzles facing downwards and add a large (10-20mm) brim around it so it is kept fixated to the bed.…
Stackable Print-in-place planetary gears with two different sized links. Stack and connect the sun and planet gears to each other in any way you like. Depending on your printer's tolerances, the gears might run loose or tight. As a guide,…
Regular hexagonal coaster from Thingiverse (by YewShmz) with traditional Japanese pattern called "Asa-no-ha(麻の葉)".
This 3D printable piece features identical geometry on both sides and is designed to be printed twice using model 'A.' Whether used as a standalone piece or incorporated into your projects, it delivers exceptionally satisfying and…
100x100 mm lithophane picture frame backlit by a Halvklart Spotlight What you need Printed parts (base, cover, button) Halvklart USB LED spolight 100x100 mm lithophane How to print your own lithophane Also, look under the section “Photos…
Modular shelving system Assembly without drilling, fixing is done with a simple Allen key. Board thickness 15 to 19mm M6 countersunk bolt + nut (M6x30) Choose the angle: 90 °, 105 °, 150 °, T. Print instructions Print settings: 0.30mm…
A Lithophane in the size of 110 x 110 mm depicting the Carina Nebula that was captured with the James Webb Telescope . The Image of the Carina Nebula is framed in a hexagon grid resembling the James Webb Telescope. It consists of two…
To easily transport your beer cans from the fridge to the garden or terrace. Two models of handles are provided for 330ml cans and 500ml cans. A very easy to remove support is required where the handle comes to rest. It is also advisable…
High quality lithophane of the famous painting “The Great Wave off Kanagawa." Built-in arc to allow for printing vertically for best quality. Print at 0.16mm layer height, 99% rectilinear infill, 12 vertical shells, keep print speeds low…
1989 (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Chopsticks holder with Japanese symbols - Mount Fuji, Bonsai, Torii gate, Rising red sun, Katana holder You can print the relief in one color or in multi-color, I added g-code for multi-color printing You can find another Chopstick holder…
This adapter allows the nozzle to be angled at 60 degree for Xiaomi Mi Vacuum Cleaner. Print Settings: Material: PETG Layer height: 0.26mm Supports: No My Other Xiaomi Mi Vacuum Cleaner's Accessory Holder -…
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Angles for OSB or MDF panels with a thickness of 18 mm. Color the corners of your furniture.
Don't know where to run those USB cables for your aftermarket head unit? This panel slides into the unused OBD connector slot behind the lower radio cage trim. There's enough room with the trim installed to hide a small flash drive. You…
This is an original model I made myself in Fusion 360. I am entering the chopstick holder competition, this is the first one I am entering. The model is based on the traditional Japanese footwear called “Geta” and functions as a wooden…
Description: Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets. Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession. Of course i could…
Ich wollte ein Spielzeug für mein kind haben was nicht gleich kaputt geht somit habe ich dieses Flugzeug entworfen, gedruckt mit 30% infill und eine 0,4 nozzle klappt der druck perfekt. Das Flugzeug ist fiktiv, frei erfunden über likes…
I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Check out the additional models: Settings Value Infill 10% Perimeters 2 Layer Height…
Cute coaster versions of acoustic sound-dampening panels. 50% version of the sound dampening panels.
Adapters for two different hose sizes: 18 mm and 22 mm (plus an 18/22 mm combo). The combo adapter is shown in the photo. The .3mf file shows how I painted-on supports for the combo adapter. I also used a 3 mm brim for stability. Print…
Randal at his instrument panel Monsters Inc.
Not sure if this is a good idea or not, so think about whether or not to you want to take the risk of using this. USE THIS AT YOUR OWN RISK! You could shock yourself attempting to install it. I used it with a LED bulb that does not get…
This is a vase mode paper airplane that prints on the back side (trailing edge). It can fly if you trim it right (post it notes etc). It isn't going to win any distance awards though that's for sure. If I did my trig right this should…
A “Miracle Candle” from the Movie Encanto. Great to throw in tea candles (with some foam) as a prop for a toddler birthday party :-). I decided to leave it open on both ends so that I can easily install\remove the LED tea candles and foam…
After downloading and making a propane cap for a 20lbs tank I thought it would be nice to protect the threads on my propane heater and propane torch that I connect to that tank. So here you go a threaded cap that will protect those hose…
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
I made an enclosure for a 3D printer using 500mm long 2020 aluminum extruded profiles and 500mm square acrylic panels for a partition. Below is a comparison with the enclosure using IKEA's LACK.…
Designed for 2 colour printing. I only had close colours in PLA (Gold Silk and Prusa Azure Blue) When my PETG arrives, I will reprint! The model is derived from my design for CNC machined grip panels, which are commercial.
Angles for OSB or MDF panels with a thickness of 18 mm. Fit 3 sides. Color the corners of your furniture.
It is better to use a filament that is resistant to heat, which will last longer. It is assumed that one thing cannot be used indefinitely, and that when it is damaged, a new one should be printed. Print settings: Layer height: 0.2mm…
Da ich meinen Staubsaugeraufsatz für Ritzen irgendwo verloren habe, hab ich einen neuen erstellt. Das Saugrohr meines Dirt Devil Skuppy hat einen Außenumfang von ungefähr 9,9cm. Vielleicht passt er auch auf andere Modelle. Since I lost my…
A model of the hexcore anomaly seen in many different shapes and sizes throughout the second season. Print all the files once. Paint the inside surfaces and internal pieces. This is easier to do before assembling. Glue the internal pieces…
Ich wollte ein Spielzeug für mein kind haben was nicht gleich kaputt geht somit habe ich dieses Flugzeug entworfen, gedruckt mit 30% infill und eine 0,4 nozzle klappt der druck perfekt. Das Flugzeug ist fiktiv, frei erfunden über likes…
This is a small LED Puck holder I designed for my lithophane prints. I wanted to use a battery powered light but needed a way to stand it up. I like that I can control the distance of the light from the lithophane print for the best…
Highlights: MERV 13 filter maintains a good airflow rate while capturing the majority of particulates. HEPA 13 is available for extraction applications. Reusable cartridge uses low-dust coconut-shell activated carbon. Can be used as a…
The model guides saw blades along two sides, which are designed to hold magnets with a diameter of 8mm and 3mm depth. The holes have a tight fit, if it comes to loose, the magnets can also be glued in place. It has a grove which can be…
The Tortured Poets Department - Lithophane Taylor Swift made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Redukce pro připojení Hadice z Lidl vysavače k ponorné pile Festool TS 55 REBQ, vše tištěno PLA, je třeba tisknout od ústí, kde jsou drážky pro připojení koncovky festool. drážky nedoléhají na tiskouvou podložku proto jsem použil podpěry.
UPDATE 2025-06-08: I have added a “version 5” ZIP that contains only a 0.4mm nozzle GCode, but with updated header/footer code from PrusaSlicer 2.9.2. It should not have a functional difference, but I am leaving the old files there for…
Hi fellow makers, this is my first real 3D model, not just remix. GOAL I want to make as-real-as-possible scaled keychain model of Ibanez GRG140 electric guitar, optimized for Prusa MINI+ using standard 0.4 nozzle. Model will be…
Hotfix for Z axis wobble (Anet A8 Plus) With the factory parts, the Z rods of the Anet A8 Plus are wobbling terribly. There are two parts per side in the game. On the bottom is the motor mount which includes the 8mm diameter hole for the…
Klíč 6mm pro otevření rozvaděče panelového domu, vytvořeno v onshape. Recommendation 40% infill, 3 perimeters.
This is a mount to attach the solar panel mount for Eufy cameras to a flat bracket that allows cable ties to be threaded through to mount to a post or downpipe. Works perfectly alongside the camera mount . Requires three M4 x 10mm…
Bola de Navidad Es una bola diseñada para insertar una imagen de una litofania. La bola es una semiesfera con un agujero trasero para insertarle una luz led del árbol de navidad y poder disfrutar de la imagen en el árbol. Impreso en PLA…
Angles for OSB or MDF panels with a thickness of 18 mm. Fit 4 sides. Color the corners of your furniture.
The rear Renault logo for model 2015 Scenic (Grand) III, Megane, Fluence
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Fearless (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Alongside the Doctor Who collection for Magic: The Gathering, 40 new thematic plane cards were introduced for the Planechase game mode, sparking my need to create a case worthy of them. Any fan of the saga will unmistakably recognize this…
Phone holder for samsung, xiaomi, iphone....
This is a cleaner for the refillable K cups. The cups I use are listed: https://www.amazon.com/gp/product/B00LHCCR92/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Place the cup full of coffee grinds over the three cleaner blades…
This holder was design to hold rectangular shaped cotton pads. A sample GCODE file sliced in 0.2mm layer is attached for easy reference. User may also make their own GCODE files to suit their needs by slicing the 3MF file attached. The…
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
“Can I have a new pen for my Promethean board, I've lost my old one”. If only teachers would look after the lovely equipment IT buy them… This clip is designed to attach a Promethean Pen to a standard lanyard clip, reducing the number of…
You need to print 6 pieces : Plank A x 4 Plank B x 1 Plank C x 1 You will need some patience and dexterity to success this one ! Here is the link for the solution (on this fantastic french website about “Casse-tête”) :…
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. Joining the family is my fourth holiday coaster, sporting…
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
This simple model is only my desing it isn´t remixed or download on thingivers or others. (i know i poste it twice, bacuse previous print is printed more than hour)/Tento jednoduchý model je z mé hlavy a není stažen z internetu ani není…
Construction Manual First of all. This is inspired by Chris awesome Mondrian Table Lamp heavily. Therefore I mark this as a remake. He uses 3D printing all the way. As I don't have that many filament colors, my design uses a quite common…
This will snuggly fit onto 4cm x 4cm extruded frames. The material cost is ~15 cents per cover.
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. New version available here: https://www.printables.com/model/490632-30mm-propane-handwheel-adapter
Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the newer propane bottles that have threads on the inside and outside. It's the same model, but this one was shortened to…
No needed support. 0.2 noozle. Layer height 0.15. Working with 0.4 noozle too.
Boîtes pour couturières permettant de ranger 18 bobines de fil ainsi que leurs canettes. Vous aurez besoin de : 10 inserts 4.50*5 6 vis M3*10 4 vis M3*25
This is a base to help stabilize a small tank/torch combination, when you need to use it hands-free. This is for a tank 74.25mm in diameter. Although these small tanks will stand upright on their own, they tend to be top-heavy and prone…
This support is permanent and therefore always ready to receive the tray. Very convenient when you already have a busy hand. Printing: PLA, no support, 100% cooling, no special precautions. Place it 5cm from the front. Print Settings…
made with https://3dp.rocks/lithophane/ I also included gcode of the lithophane both bent and straight.
Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.
Credit to original creator: https://www.thingiverse.com/thing:5427331
