3,157 models
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET
The ring segments for a Happy planner notebook organizer. I printed with tricolour PLA, 0.20mm Quality .4 nozzle Supports on build plate
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
This is a study on print-in-place articulation. I wanted a small anatomical figure that was jointed. I found other great designs where you print the respective parts then assemble, but scaling down caused difficulties as the smaller snap…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Diseño del enganche de la maleta de herramientas Mannesmann 215, la parte de la pinza.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
The standard bed level correction procedure can be very time consuming and tedious. This calibration sheet is designed to be used in combination with a conventional flatbed document scanner. The line widths are analyzed on the scanned…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Bisagra para el cierre de la maleta de herramientas Mannesmann 215
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Ablage für Pfannenwender und Löffel mit praktischer Auffangschale für Tropfen. In PETG gedruckt auch spülmaschinenfest. ---- en ---- Holder for spatula and spoon with practical drip tray. Printed in PETG also dishwasher safe.
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for PETGSource material: PET
Banners with letters and numbers, so the less technically savvy people can easily print and use them. Banners with letters and numbers, so the less technically savvy people can easily print and use them. Not all letters available yet. I…
Print approx. €2.88–€3.51 excl. taxPreliminary estimate for one variant
A simply cable channel to help tidy and hide cables on walls, desks, and floors. The length and capacity can be easily be modified by adjust scaling in your slicer.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for PETGSource material: PET
Height 116.6 mm Width 180.7 mm Depth 80 mm Version 2 of my small watering can for my carnivorous plants. Can also be printed at 130 or 150 per cent (see pictures). For the print: Resolution: 0.2 mm Filling: 100% Filament material: PETG,…
Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant
I wanted LED indicators for my Christmas light controller. It will hold 20 channels and can easily be glued to where you want it. My LED's are 4.8mm in diameter so I provided a 5mm and a 4.8mm mount. You can buy this here!…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
Motivation On cable channel corners, often cables are visible or open ends of the channel are visible. This cover gives a nice looking corner when the cable channel is visible. Print Printed with SUNLU PETG without supports Brim is…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
🐉 Dragon’s Fang Wizard Staff – Channel Your Inner Sorcerer! ✨ Summon storms, control elements, or just rule your living room in style with the Dragon’s Fang Wizard Staff ! With a fierce dragon wrapping around a glowing arcane orb and an…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Low-poly model added Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
Print approx. €36.67–€44.82 excl. taxPreliminary estimate for one variant
imprimé en PETG ce support est destiné à une canne d'un diametre de 17mm.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Print approx. €1.26–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Pas de perçage, dans les panneaux, ¼ de tour, insérer une vis ou python dans la pièce PLA et reste à mettre une horloge, cadre photo, miroir …
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
TL;DR Simple lid for garden cans to protect insects from falling in and die, parametric FreeCAD source included so you can create any size with just changing one number. Collection tools, garden exercise, CAD Motivation Stop dying insects…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Name Tag for Kids or Schoolbag, I‘ve created them for the kids backpacks. I‘ve used PETG for better durability. Dimensions: 102x24x8mm - Hole ~ 18mm Version 1.1: Added more names and the plates have now chamfered edges. 1.2: Added more…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Pourer easy to print on frontside down. Only automatic painting and organic support I have printed in Prusament PETG Jungle Green with 0.4 nozzle and 0.32 layerhigh ********************************************** Der Ausgießer lässt sich…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
Prevent the tip holders breaking from drops with this gaurd
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
About I needed 4 channel relay module dummy for other designs in 3d and physical, just to avoid damaging the original ones. Notice that underneath you should leave about 2mm for the soldered pins from the elements. Please like, create…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Fills holes not used to stack. Also fills sides based on closing out the bottom of a stack.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 20h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 4 perimeters, no supports, legs are recommended to print in vertical…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for PETGSource material: PET
Support de canne pour volet roulant
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
We love beans in our mostly vegetarian home, but the cans we buy from Costco don't stack! Wtf? I made this little minimalist insert to go between layers for better storage. They can be stored on a nail in the pantry when not in use, and…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
We need a stacking aid for ‘un-stackable’ cans. Most of the cans in Germany are stackable but some not. This is my solution to solve this problem for cans with the dimensions: 55x38mm. The full height is 204mm. I've added my design file…
Print approx. €4.65–€5.68 excl. taxPreliminary estimate for PETGSource material: PET
A practical holder for the Ferret Pro 3D scanner, designed for mounting on the IKEA Skådis pegboard. The model features a triple-clamp structure that securely holds the scanner, allowing for easy placement and removal. Its simple shape…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Lets you use smaller switches that are commonly available online with the Petamentor2 remote pannet holes
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Since phones have no longer mini jacks it is hard to get music from the phone into a mixer channel. This bluetooth module has a mini jack that fits into any audio system, but it’s designed for MackPro mixers that have a mini jack input on…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Deckel mit Griff für Gießkanne 0,5l von Haws . Der Druck erfolgt "print in place", die Ausrichtung sieht man in der 3mf-Datei. Translation: DeepL Lid with handle for watering can 0.5l from Haws . The print is “print in place”, the…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Support de lampe de remplacement pour ce TP. La pièce originale est très fragile. Version pour impression en PETG. Vous aurez besoin d'un insert M4 (ruthex) et de la vis vis molletée de l'original.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Material 1pcs 6-channel Fan controller Akasa AK-FC-08BKV2 https://www.conrad.ch/de/p/akasa-ak-fc-08bkv2-pc-lueftersteuerung-13-32-cm-5-25-zoll-anzahl-kanaele-6-inkl-led-beleuchtung-791451.html 6pcs 3.5mm stereo jack panel connector TRU…
Print approx. €15.37–€18.78 excl. taxPreliminary estimate for one variant
Ersatzteil für den abgebrochenen Verschlusshebel im Deckel einer Thermoskanne
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
Da es immer wieder vorkam, dass Insekten in unsere Gießkanne blomus LIMBO fielen, habe ich diesen Deckel entworfen. Die Hauptmaße in mm können der Zeichnung entnommen werden. Translation: DeepL As insects kept falling into our blomus…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Das Teil wird an der Badewanne festgeklemmt und verhindert, dass die Badewannen-Duschwand sich beim Dusche über den Wannenrand verschiebt. Zur Befestigung wird es einfach über den schmalen Bereich der Wannenwand gesteckt und so weit…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
Overview Sick of loose screws rolling off your workbench or half-used resin bottles cluttering your space? DriftJug is here to bring order to the chaos! This versatile 3L container keeps bulk materials sealed, organized, and—best of…
Print approx. €10.74–€13.13 excl. taxPreliminary estimate for one variant
Ayant récupéré de vieux négatifs sur plaque de verre et sur film, j'ai éprouvé le besoin de réaliser des plaques support pour les tenir et les protéger dans mon vieux -mais excellent- scanner à plat Epson 4870. Pour les plaques de verre…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
I have a eurobox that I used for travel, bin which are 9u height fit perfectly inside. This is my solution to store my set of “small” spanners (6-7, 8-9, 10-11, and 12-13mm) Nothing special to print, mine is using standard quality (0.2mm)…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for PETGSource material: PET
Ein Schlüsselanhänger mit dem Namen der Schule.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
After buying a Einscan-SE this was the first thing I scanned. a random buddha statue my wife owns. The details this thing got is amazing. Be sure to tune your support settings well. Print instructions Pretty can do anything with this.…
This was a 3d scan of a figure from the game assassins creed.
perfect fit for 2020/2040 Extrusion (Openbuild/Ratrig) BearFrame Cover / Cable Channel. haven't found any that would actually fit snug, so i made one myself. it fits perfectly, is flush to the surface and has about 3mm room behind it to…
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this Low-poly Mannequin Head stands on your own table in…
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
Stencil dimensions: A6 (14.8 x 10.5 cm) Thickness: 1 mm Square dimensions: 2.8 x 2.8 cm Stencil fits perfectly to a 0.5 cm dot grid pages in bullet journal. Wave pattern on the top and zig zag pattern on the bottom of the stencil can be…
Here is my design of a Household Task Planner! There are no supports needed for this print and you also won't need the MMU for a colored print, the color change is purely layer based. Feel free to use whatever captions you like for the…
I want to install a reasonable cable management in my 3D printing cabinet. What is closer than the channels to print. Sneakypoo was so friendly to design one that I just had to enlarge. The STL files are not completely bug free so only…
Introduction This is a functional print that helps you finally digitize those 35mm film negatives - old family photos and recently developed rolls alike. The main component consists of a frame with a print in place mechanism for advancing…
Storing cans for first-in-first-out (fifo) usage. Put cans in the top, and they roll down to the bottom. Some other notable features: The wedge cutout for the upper level lets these print without supports. Sloped track rolls cans to the…
Nach einigen Jahren im Einsatz ging die Brause meiner Gießkanne leider kaputt. Immer nur mit dickem Wasserstrahl gießen macht besonders bei jungen Pflanzen keinen Sinn. Die gedruckte Brause lässt nun wieder sanftes regen ähnliches Gießen…
Try one corner clip if it works for you.
Credit to ryandam here ! to his model 01/10/2022 283mm 19mm size + Thickness of 1.8mm 200mm longe - 19mm wide / cover 140mm longe - 19mm wide / cover 200mm longe - 25mm wide / cover 176mm longe - 25mm wide / cover more than this in…
I designed and 3D printed this minimalist soap dish to solve a common problem — soggy soap! It features a built-in drain channel that allows water to run off easily, keeping your soap dry and lasting longer. The open design promotes…
It's not a precise nor detailed model. It has simply 4 parts to show you the basic principle of a Janney coupler. Print in the position I posted. It's basically support-free if you print it small. Will need to add some support with the…
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
Update 2024-06-23 Added 3 new corners Update 2024-01-02 Added T-junctions and an end piece I designed the cable channel to cover the 4 Atmos cables running from my ceiling to the AV receiver. The space for the cables inside is 20 x 10,5…
BOM: Printed with ROSA3D High Speed PLA Gray This is the "Double Row" edition of my battery holder set. It features grid configurations ranging from 2x2 up to 2x6, providing superior structural rigidity for larger battery packs compared…
Produced with the awesome support from my Patrons! This is a 3D scan from a rock on Kitzbühel Horn. I used my mobile camera, snapped about 70 photos around the rock and then plopped them into meshroom. Excellent results straight from the…
A magnetic marker block kit for use when scanning objects with a 3D Scanner. A Truncated Icosahedron Block (Half-globe Shape) An Equilateral Pyramid A smaller Dodecahedron block A long rectangular bar with space for M6 male and female…
If you're looking for my Bambu print profile, you'll find it at MW . Doll Dress Mannequin A small dress mannequin designed for displaying or fitting doll clothing . This model provides a simple stand for showcasing handmade doll outfits,…
General This STL contains the rough measurements to print channel covers for the revealed parts of the Anycubic Kobra. My rough estimates were: 148mm x2 (2 channels by screen) 195mm x2 (2 channels opposite side of the screen) 312mm x 2(2…
I've created a modular tool holder inspired by the toolbox widgets but with my own improvements. Theres a dovetail that allows to add or remove a holder to meet your needs. Can be used for spanners and screw drivers, perhaps even chisels.…
There is a free and paid version of this software 3D scanner. Since I released this free version of the program, I've put a lot of effort into creating version 2.0 of the scanner. It's only available in the paid version.…
Many things have changed over the years so please consult the most recent documentation on github: https://openscan-org.github.io/OpenScan-Doc/hardware/OpenScanMini/ The current printable files are organized and documented here:…
Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…
I designed this because I couldn't find any 9x17mm aluminium u-channel here in Australia and really, this is one of the great things about 3D printers - if you don't have it, you can make it. The drive to make this was for use with…
System of objects for 3D scanner markers. All figures have shallow cutouts for 6 and 10 mm markers (8 and 12 mm cutouts). The cutouts allow the markers to stay in place longer, since they do not catch on the edge during storage. The…
These are tools for scraping out small spaces or scraping small detail on surfaces… like your 3D prints. There are two types in each size. On one, instead of a small curve, it will have a straight end. CAUTION These tools have VERY SHARP…
This Venus de Milo model was made by Revopoint POP. If you want to get more models like this, please try to use 3D scanner POP: https://bit.ly/3xb37c3 The accuracy of Revopoint POP is up to 0.3mm. It's very suitable to scan sculptures for…
T-slot covers provide protection from debris buildup and can also be used to manage wires and cables recessed within the T-slot. They can also add a finishing look to your project. So... Since I couldn't really find what I wanted I made…
I had a vacation in Sintra Portugal. Took the opportunity to 3D scan a few rocks, mostly for fun. One of them turned out really great. The others, not so much. Anyway. Enjoy. https://www.myminifactory.com/users/terrain4print?show=store…
Flexible spanner holder for spanners in different sizes. The asymmetric fork part of the holder make it possible to have different setup in your spanner drawer. Gridfinity is an open source storage system developed by Zack Freedman. For…
The source marked this model as adult content.
This is a model of a chicken nugget that i scanned and modeled in Blender. PRINTING you have 2 options how to print the mode, you can just print the “flat bottom nugget” or you can print the “nugget” model and use supports but i recommend…
This is a scanner stand for mobile phones. Cut a standard 25 mm PVC pipe to size, push it through the printed parts, lock the bottom part to the table using a bar clamp and you are done. Optionally you can put M6 nuts and bolts to the…
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
This dodecahedron can be used to stick reflective markers for 3D scanners to it. It's fully parametric when you use Autodesk Fusion. This was built with a free version of Autodesk Fusion hence the license that doesn't allow commercial use…
As I'm rethinking my printer setup, I wanted to cover up the ugly wires leading to the LCD and switches that I retrofitted to the case. Hides them pretty nicely. Fits on both sides of the case! For printing, just lay it on the bed…
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
BOM: Printed with ROSA3D High Speed PLA Gray This is a practical set of spacers designed for building custom 18650 Li-Ion battery packs. The set includes linear strips ranging from 2 cells (1x2) up to 6 cells (1x6) . The Main Problem…
Easy print, upside down with no supports. Recommend TPU or other flexible plastic. It fits tight on 4 different size cans. There are 2 different sizes in the middle area for small cat food cans, push all the way down to click on cans like…
Set of wrenches/spanners with the sizes: 6 - 7 8 - 9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 Print settings: Layer: 0.25mm Draft or 0.28mm Superdraft Infill: 25% Nozzle: 0.4mm Filament: Esun PLA+ (PETG should work as well)…
this 4 channel relay case is a remix from this model https://www.thingiverse.com/thing:957292/files I made it fit for my 4 channel relay board. I think it is safe to use with 230 volt. Printed on my prusa mini + Gcode included.
This thing is a protection and mounting case for the popular 8-channel relay boards commonly sold under the SainSmart and Kootek names and by various eBay sellers. The opening in the top of the case helps dissipate heat generated by the…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.2 mm layer height, 2 wall loops, 8% honeycomb infill, automatic snug normal supports at 30 deg. threshold and on build plate only. The default height of…
![Name tag / plate [ Hannes | Nora ... and others ] for Backpack](https://media.printables.com/media/prints/3ab171f3-44b8-4b4e-ae40-d70b391469ad/images/10453577_671b06b4-46e1-4fea-8b5d-31d28d7e5dc6_ad6c8d86-4f9e-4140-a0cb-c19ea660166b/img_2058.jpeg)
![PaScn3D Mk.0 - 3D Scanner [PrusaPrinters Contest Edition]](https://media.printables.com/media/prints/23297/images/237355_72dadc53-8e36-4086-b7eb-9482eba771ac/step27.png)
