Counting matching models…
Thanks to @Mhodder (thingiverse) for the original model AND posting STEP files so I could easily edit them!!! I made the following changes to dramatically reduce the BOM and assembly time: No soldering needed! Just seat the controller box…
This model is inspired by a non player character from a private campaign (a sort of very-alt-universe Against the Giants). This Stone's name is Aokeerna, aka Aokeerna Ebonshale. NOTE: This model was designed for - and only test-printed on…
As a professional Karaoke DJ I am always looking for ways to organize my booth. Mics take a lot of space and like to roll around, so I made this stylish stand for them. Wireless mics come in sets of four. I use one for myself so this…
a microphone holder for a mini karaoke machine, holds the machine and mics from this amazon listing: B0CY4H2MVL i printed with fuzzy skin which seems to grip the karaoke machine better
My friend asked me to make a replacement covers for Nagaoka phono cartridge MP-11 and MP-110. I share it with you too. Cover should be usable for all MP family Nagaoka phono cartridges like: MP-11, MP-100, MP-110, MP-150, MP-200, MP-300,…
PAOK keychain The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
A quick little microphone stand I designed for my grandson's karaoke microphone ( https://www.amazon.com/gp/product/B073J3GWCC ). Hopefully this will keep it from rolling off the table all the time! The body has two recesses for M3 heat…
Motor wrench for AokFly R-vector Fire Phoenx 2205. It is thin, so it can be used even when you have motor guards. Reccomended materials are PLA or PET-G, or some really hard ABS (Fillamentum) !! Print with at least 3 perimeters and infill…
I needed some way of holding my mics. Print instructions Use Supports.
The design ideia is from emeraldmeadows ( https://www.thingiverse.com/thing:2419239 ) i just made some minor changes to the concept. The holes in the box and lid are tight enough to use a tap. I use M3 screws for the box and M2.5 for…
VTech Kidi Star Karaoke Machine https://www.vtechkids.com/product/detail/18573/Kidi_Star_Karaoke_Machine The ABS piece that holds the microphone adjustment arm tore in multiple pieces. I recreated it and have printed a successful version…
This is a custom-designed, clip-on microphone holder for PPIC portable karaoke machines. I designed this because I was tired of the microphones rolling off the table or having nowhere to put them when moving the speaker. Features Secure…
A low poly version of the famous statue from the Iliad. Laokoon / Laocoon. That is the first time a did a low poly remix, so I am very open to construcive feedback.
microphone stand for IDance Karaoke Box height adjustable by individually pressable rods
100x160mm sign, advertising Stumpy's Fireworks shop. He does saw repair too. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also…
Adapted the parametric case and made the insert to be glued in place. Holds the USB charging cable as well. Printed on Bambulab A1 with PETG, 0.2mm layer height.
This is a case for the AOK 150W 3in1 discarger. I printed it in ABS because the bulbs get hot. http://bit.ly/3rh6Umn Print Settings Printer: Craftbot + Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: No Name ABS Black…
Karaoke Clerk - AGRETSUKO - WALL ART
This case is for a DAOKI USB buck-boost converter , which you can get from Amazon . I have a USB LED ring light that I've mounted to my CR-6 SE. The light has an inline controller for power, brightness, and colour temperature, but that…
Upcycle a broom stick into a telescopic microphone stand Standard telescopic broom handle with 24mm thread Base with 27.2mm hole for 27mm interference fit with broom handle (Remove the hook if present) Render Printing Microphone Clip and…
Osłona na wentylator 50x50 zaokrąglona
This is a simple mount for the Aokin Raspberry Pi Camera Module 5MP 1080p OV5647. The camera module is 25mm x 25mm x 1mm and has the ribbon coming out of the bottom. The mount slides onto the standard Raspberry Pi .1in pitch 40pin header.…
Base cap to replace the easily lost part for these cheap Amazon karaoke mics. Printed without supports in PLA, .2mm layer height, 50% infill, although anything should work. Dimensional accuracy is quite important, it's quite a tight fit.…
I got these cheap crimpers on Amazon for a good deal, but couldn't find an existing gridfinity storage solution as they are slightly different than others I have found.
This is a case for the AOK 150W 3in1 discarger. I printed it in ABS because the bulbs get hot. http://bit.ly/3rh6Umn This is a tight fit :) Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 19 Category:…
This model is a remix of the original base plate from JRT3D 's " The Recreator 3D : MK6 " I have modified the original base plate to have compatible mounting points for a cheap 24v power supply I found on amazon , the “ Daokai 24V…
A frontpanel for the PT2339 karaoke reverb frontpanel. Two versions. One with a lip and one simple frontpanel. Text was manually added in orcaslicer and is not included. Depending on print settings the mic input separator might need to be…
A cable router / hider for my aokeo microphone arm
Supporto microfono del karaoke Moukey Casse Karaoke
PAOK keychain The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
This is a simple to print can holder. It is intended to be screwed into wood so better suited for a work area vs a kitchen or something. The screws are countersunk so they don't interfere with the can. The exact dimensions of the opening…
This is a simple to print can holder. It is intended to be screwed into wood so better suited for a work area vs a kitchen or something. The screws are countersunk so they don't interfere with the can. The exact dimensions of the opening…
F.C. PAOK kaychain I made myself, feel free to share your makes. Category: Keychains
This is a model of Maokai's E ability, a little cute sappling guy.
Use this tool to center and orient the polarity for brute sized bases in Conquest. Magnet hole diameters available in 10, 11, and 12mm all of them being 1mm deep.
It's a cheap crimper that was in my tool box and it needed a home, so I made this.
