Counting matching models…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
Here at Vestibular First, we are excited to share our knowledge and passion for the anatomy that makes up the vestibular system! Combining this knowledge with technology is at the heart of our company. There are only a limited amount of…
The official description of this item, as per WotC, indicates that 2 medium creatures can fit inside at the same time, and that this item is considered large. This seems impossible. It is now well over the "large" footprint, but looks…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A thing designed to be screamed into. The internal design is an experiment in waveform theory and the Huygens–Fresnel principle . The resulting shape was intended to dampen sounds in the 30Hz to 150Hz range, but instead seems to produce a…
This is a simple concept that has been used by many over the years, usually using various bits of wood and other hardware. I designed this to be as simple as possible to make using your printer and minimal tools and hardware. Using the…
See the Slow Roller in action here: These are the 3D printed parts for a Slow Roller apparatus to be used in a physics class. In addition to these parts you need two or four equal lengths of 1/2-inch electrical conduit and something to…
This device allows for the connection of standard laboratory stands to metal rods by clamping them with two screws from either end of the central block. The use of this connector will allow the attachment of rods to stands at a right…
A personal take on the Apparatus that I have never liked the published version of. Original Concept belongs to D&D.
I made a paper hole puncher, Applicable to thicknesses of A4 paper and below. Just one piece of paper can be operated on, not multiple ones together, After all, It is not a metal blade. In addition, I made various styles of Bookbinding.…
This model is compatible with the lego system.
This is a DIY project that is both educational and fun! The vestibular apparatus is located in the inner ear and is a key system in staying in balance. It is comprised of 3 semicircular canals, tiny calcium crystals, and a vestibule. The…
This is a simple concept that has been used by many over the years, usually using various bits of wood and other hardware. I designed this to be as simple as possible to make using your printer and minimal tools and hardware. Using the…
Tested with PETG printed with a 0.4 mm nozzle at 0.3mm layer height. Print with supports touching build plate. Use sculpey III or casting sand to make the mold, low melting temperature metals are preferred (tin or zinc alloys). Small mold…
Ready-to-print plate to make things easier for people who want to build their own machines for hobby purposes.
EN: This is a minimalist, custom-fit wall mount for the Panasonic ES-LV67 shaver. The mount is available in an adhesive or screw-on version. The shaver slides into the holder from above and is held securely in place. To achieve this, I…
When you slice split it into parts and remove numbers 5, 7, 14, and 18 or use the included mf.
This is a WIP to design a 3d printable stopcock plug for directing flow of gases and/or liquids in a manifold assembly. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: No Resolution: 0.20mm…
Ein einfacher Dörrapparat um Kräuter, Chili, Apfelringe, usw. zu trocknen. Im Inneren des Behälters sind 3 Trockenbleche aus den Seitenteilen leerer Prusamentspulen untergebracht. Je nach Sonneneinstrahlung erwärmt sich das Behälterinnere…
This is a DIY project that is both educational and fun! The vestibular apparatus is located in the inner ear and is a key system in staying in balance. It is comprised of 3 semicircular canals, tiny calcium crystals, and a vestibule. The…
I used two of remix rource files. And i remixed one of them. Video is at https://youtu.be/Uhe_OhFQYhc Category: Tools
Simple apparatus to help measure radius on 90° edges, with a vernier caliper. This size can measure between 4mm-20mm. I needed to measure the radius on various phones and tables, and found out there was no simple solution, so i modeled…
The Chromatic Countdown Apparatus (a.k.a. Learning Tower) I designed to help teach my kids polygons and color theory that can also be a fun learning game. The tower employs polygons from a Digon(2-sided) to a Nonagon (9-sided). Each…
Moment of Inertia Apparatus First I have to thank then original designer “ falconphysics ” for the model my daughter found. She asked me to make for her to demonstrate for her Physics class. I only modified the design slightly and…
This base plate remix is for Scalextric Sport Digital track.
Place the microphone in the correct position that best suits the sound source to be recorded.
The last (in the series of 12) Crunchlabs built a rocket revolver. The circular platform where the rocket launch bases are mounted came warped (in our kit) and led to too much friction to rotate freely while moving on to launch the next…
Designed for iphone 20w charger and iphone 12. If you want other models, please leave a comment.
Updated the ApparatusBase_V2D to fix an issue were a screw would not fit in the top side. Now it is fixed and screws fit
This is printed in Hatchbox Orange PLA 100% infill is necessary to make it so it doesn't slowly soak up antibody/milk solution (gross). Use the cover with a sheet of parafilm for best results.
This are the files for my brake test apparatus. I use a skateboard bearing screwed to the base board to rotate the puller arm around, and I use a wire from the puller to the arm. video on showing the device in use: Meter used…
longer insert for electrical,, stuff. scaled as snapshot from slicer to fit the threads
Snail Radial Fan compatible plastic apparatus https://www.elektromarketim.com/bahcivan-bdrs-125-50-one-egimli-sac-govdeli-salyangoz-radyal-fan?recommended_by=dynamic&recommended_code=4023fc155eb748a37ab4e31b20baa9ad
I don't expect that a lot of people will have use of this exactly as-is, at least you likely want to use a more modern controller. I have therefore attached a STEP file of the full assembly so you can modify it to your liking. I used the…
This Adapter Snaps on to the Drain Outlet of the SCA-1200HT Support Cleaning Apparatus In order to point the flow of Liquid down instead of out. If there is back pressure I could see the Liquid trying to make its way out the slots between…
Moment of Inertia Apparatus First I have to thank then original designer “ falconphysics ” for the model my daughter found. She asked me to make for her to demonstrate for her Physics class. Please refer to “ falconphysics ” link for any…
Use general settings. Don't forget to set the fill rate to 100 percent.
Sockel für Wandapparat einer Gegensprechanlage von Grothe um einen Funksender darin unter zu bringen. Es gibt zwei Blenden um den Funksender entnehmen zu können. Die mit den beiden Löchern ist um die Türzustände offen und Geschlossen…
Das Modell besteht aus 2 Teilen, dem Becher und dem Halter der eingeschoben werden muss. Daher müssen die Teile im Slicer als Objekte getrennt werden. Den Halter habe ich dann seitlich hochkant mit organischen Stützen und Rand gedruckt,…
CS (EN version follows): Ve škole jsme tuto pomůcku měli jako originál, byla dodávána centrálně někdy v 60.-70. letech přes Komenium - učební pomůcky, n.p. Za ta léta pečlivého zanedbávání… znáte to. Předpokládám, že je to podobně i na…
The Shrimp Spermatophore Adhesion Apparatus is used for testing the adhesion or stickiness of spermatophores. As seen in the figure, the glass plate configuration is slid into the holder and the force gauge is hooked onto the other side.…
This is a testing apparatus I made for my IB physics IA
As you may have noticed, this is the Panduit cap and washer sorter or "The Capparatus", it's also just a generic round item sorter if sized properly. These caps and washers are used on industrial electrical control panels to make sure…
You can use a plumb line to determine the position of the model's center of gravity.
This is a cup holder/organizer that can be used in fire apparatus to add organization and a place for drinks and a phone holder on each end. Overall dimensions are 24 5/16" wide x 6" front to back. The model is designed in three pieces to…
This model is compatible with the lego system.
You can use a plumb line to determine the position of the model's center of gravity.
This guy is my first attempt to give the tinkerer in Gloomhaven a little company. I found it best to print it in .05 mm and supports for the knife.
I bought a field phone that was missing the end caps of the hand set. It seems to be an M45x2mm thread, but it needed a lot of clearance to fit. These end caps are quite crude, but I don't have the original ones and I couldn't be bothered…
