23 models
The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…
Remix of adrians design to be used with N scale, in my case Minitrix. Uses a M3 Nut and Screw. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: [ Generic PLA…
Nicolas Maduro arrested Funko Pop. Feel free to scale it to your liking or to fit your printer. Let me know if you'd like another model, and I'd be happy to design it. More models on my profile. If you like any of them and want to leave a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a dragster style carburetor scoop I designed for my boat. It requires quite a bit of post-processing to make it look finished. The Mounting Plate was cut from ¼ inch polycarbonate on a CNC router. The rest of the parts are…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
more and more Guitarsupports are used especially by classical/acoustic players. this model is mounted with 3M SJ 3550 Dual Lock tape ( or similar ) on the guitar and can easily be dismounted again. But the Advantage is that the support…
direct replacement stack for the USA Trains NW-2. Harco design spark arrestor.
Arresterdramon [293] from Digimon
I created a housing for the Tuya thermostatic head. Unfortunately, the locking cap is severely unfinished and breaks off very easily. If the lock breaks and the cap does not stay in place, there will be a power problem. In this case,…
Vnitřní část aretace střechy houpačky. Nutno vlepit matku M8, nejlépe pojistnou. Zajištění do rámu houpačky 2x samořezný šroub Návaznost na díl: https://www.prusaprinters.org/cs/prints/83514-aretting-roofs-on-swing/comments
Держатель пламегасителя 13720-91J30-000 для лодочного мотора Suzuki DF4, DF5, DF6. Flame arrestor holder 13720-91J30-000 for the Suzuki DF4, DF5, DF6 boat motor. Print Settings Printer: Anycubic Vyper Rafts: Yes Supports: Yes Resolution:…
Quick design I made for gifts. Printing should be extremely simple, though may need to adjust slicer for the text serifs. The “tall” model has the image/text raised much higher from the base. Also included is a project file for a fridge…
Spare part for baby cart Bugaboo Bee5 for setup the seat.
I needed an insulated feed through for an antenna lightning arrestor I'm building for shortwave radio. The STLs as presented are specific to my application, but I am including the FreeCAD file as well, in case you need to modify this to…
This arrester for German HERAS rolling gates is a replacement part for the original component. After a few years the original one was torn appart and does not work anymore because the security pin of the gate was able to slide out on its…
You need 2 printed pieces of upper and 2 pieces of lower magnetically arrest, 8 pieces of neodym magnet 20x10x2mm (https://www.unimagnet.cz/kv-20-10-02-n_z110/), cca 15 pieces of 3M screw and nut, saw with fine tooth blade (steel), model…
I experienced Sudden Cardiac Arrest in 2021. I made myself an ornament.
You need 1 pieces of plexi glass 500x500mm, cca 25 pieces M3 screw + nut, 4 pieces of printed door hinge, 4 pieces of printed door holder. My reccomendation is use PLA filament. Gape between plexi glass parts should be cca 2 mm due to…
Apply this crack arrestor cross-wise ahead of the leading edge of the crack as shown in the photo to help prevent further crack propagation. Apply the crack arrestor using a suitable two-part epoxy. The crack arrestor shown in the photos…
cantwell class arrestor cruiser Starwars : Andor. Split. Glue together. or use .obj and resize to your needs. I would nod reduce more than 20%.
![Arresterdramon [293] from Digimon](https://media.printables.com/media/prints/960643/images/7335855_726d558f-5041-4eeb-9a11-92b6ddf78a66_8680d984-d812-4504-85fe-2fb0b92e7a39/arresterdramon-293-from-digimon.png)
