Counting matching models…
Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for PETGSource material: PET
See it lighting up: https://www.youtube.com/watch?v=oOsjZG98mmU (link is fixed now) This is a 3d Arsenal badge complete with a kickstand and light-up letters. You can turn it on and off by simply pressing the back of the badge. It has 3…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Logo Arsenalu na klíče bez nutnosti multimateriál tisku. V Gecode, již nastaveny pauzy tisku. Tisknuto s 20% výplň
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This is Arsenal a soccer team
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Gunners! Thanks to https://www.printables.com/@TurboPL_2127373 for noticing the error with the original. I made v2 with less color swaps then the original Filament changes to achieve the desired result. Standard coaster size and 7mm…
Can be a Christmas decoration or scaled down to be a keyring for Arsenal fans.
Welcome to Emirates Stadium, Home of Arsenal The Emirates Stadium (known as Arsenal Stadium for UEFA competitions) is a football stadium in Holloway, London , England. It has been the home stadium of Arsenal Football Club since its…
A simple version of the Arsenal canon made to be a desktop or shelf ornament for fellow gooners
Dyson V15 accessory holders can be mounted on a vertical wall or under a shelf, allowing you to create your ideal cleaning station. You have the freedom to position your accessories vertically, horizontally, or at a 45-degree angle, all…
◾ Size: 20cm / 7.9 inches in width, 20cm / 7.9 inches in height, and 0.3cm / 0.1inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately. ◾ If you want to paint your model with a…
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
A remix of yzfdmeier's Frankford Arsenal X-10 Case Feeder Shuttle Block . I cleaned up some details that improved the overall fit and finish. Also, added a maker's mark to differentiate mine from his. To use, push the case shuttle towards…
This amounts to nothing more than saw it being reviewed and said that's a great idea and I can make it. So I've included two versions of it with and without a top cap so you can choose which one you want. Print Settings Printer Brand:…
Keychain versions of the Arsenal Cannon made from Vector images
Arsenal FC shield with flexi legs. Find others shields in my collection https://www.printables.com/@PipodV3D_2293483/collections/1979805
Reproduction fidèle de l'emblème d'Arsenal FC, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 / Dessous…
Escudo del equipo de soccer del arsenal para imprimirse en una sola pieza no necesita soporte
This model allows you to mount the Mr. Bullet Feeder collator to the Frankford Arsenal X-10 using Mr. Bullet Feeder bracket, rotated downward, and the stock mounting holes on the extrusion for the Frankford Arsenal Bullet collator. Print…
red until 6mm green until 6.6mm white until 7mm finish with gold
I needed a place to put the shell plate and tool head while taking measurements to design and build accessories for my Frankford Arsenal X-10. So, I whipped together this handy caliber conversation stand… The stand is comprised of two…
This beer mat can be printed as a whole using an MMU or similar or print the parts individually and glue them together afterwards. (A well adjusted printer is necessary as there are no tolerances between the parts) I also have coasters…
Anyone who's has spent any period of time with an X-10 press knows all too well that jams that can occur as a result of the shell plate retainer loosening up and rotating counter-clockwise every so slightly. This rotation repositions the…
One of the heartaches of the X-10 Powder Measure is to remove the hopper and drum assembly from the lower part that attaches to the tool head, requires removing 3 M4 cap head Allen bolts. These bushings along with these thumb screws ,…
I hated how difficult it was to load straight walled cases like 44, 38, and 357 and I kept trying to lose the included collets. So, I designed collets with a beveled mouth that I can re-print whenever I inevitably lose or break one. I…
On Frankford Arsenal X-10 presses equipped with their bullet feeder, this tool disables the bullet feeder by preventing bullets from being feed to the case and bullet seater die in station 9. To use the feeder block, hold the ridged…
For those that have the FA X-10 bullet feeder, but either don't need the collator or have the collator but wanted a coinvent place to store your case simulator, this is the model for you. You'll need four M5x30mm socket head cap screws.…
Cookie cutter for Arsenal Logo. The Manchester United is also on my Profile.
Printed 0.2mm, 3 Walls on it side with tree support and a brim.
I do a LOT of reloading and just purchased another single stage press, the Frankford Arsenal M-Press to supplement my progressive presses. So far I like the press and the ability to easily swap dies in a matter of seconds. What I don't…
Bullet feeder plates that fit the Frankford Arsenal Bullet Feeder. Rifle bullet plates are not available from FA, and each of the pistol calibers are purchased seperately (with a bullet dop and seater). I built these to fit the collator…
Spent primer bottle adapter for Frankford Arsenal X10. Print with 100% infill to get needed stability. Fits standard U.S. sized bottles.
A meticulously redesigned 3D-print-ready version of the iconic Arsenal Football Club logo. Crafted with precision for high-quality printing, this modern reinterpretation captures the spirit and heritage of the team while offering a sleek,…
Powder Check Die for the FA X10. Plugs into the head and sound the alarm if the charge is not correct. Case activated Uses magnetic reed sensors and some basic wiring. Reed Sensors: $10 - (…
Frankford Arsenal kinetic bullet puller wall mount. Use to screws to fasten it to the wall. Category: Other
Simple Arsenal Marking for fun for Russian arms factory famous for AK firearm
Sometimes cast lead buckshot doesn't come out perfect. At trick to get them more uniform is to tumble them in a rock tumbler. However I didn't want to pay for somethin I'll only use once or twice a year. I also didn't want to coat my…
Complimentary to Armor Set - here i pulled Large sword and shield. As i used it for MOC skeleton - it seems the best fit is when you print at around 96-99% size - for nice fit i had to shave off a bit of axle with deburrer, hence cant…
The Square Funnel for Frankfort Arsenal Rotary Tumbler (F.A.R.T) fits snugly into the drum. However, it didn’t cause any brass loss from the square box during the filling process. The funnel is printed in PETG, but PLA should work as…
English: This 3D print model is a unique shopping cart chip, specially designed for lovers of the Marine Arsenal. The chip is the size of a 50-cent piece, making it compatible with most shopping carts. Please note that a 3D printer is…
This is a simple, one-piece 3D model inspired by the Arsenal Football Club logo, featuring a built-in ring for use as a keychain. Designed as a single solid print, it requires no assembly and is sturdy enough for everyday use. The clean,…
Print Settings Printer Brand: PRUSA XL Supports: Yes Resolution: 0.2 Infill: 15% Filament brand: Overture PLA Filament color: Black Filament material: PLA
Remix of Frankford Arsenal X-10 Case Ejector Guide
So I have included bother version of this, with and without the pegs attached. I have taken to printing the begs and the holder separate simply because it makes for a nicer print. As I recently picked up this set I built this to get it…
Need replacement intelidropper tube look no further. Mine came in broken in the box. instead instead of returning i hopped in F360 and whipped this up.
This strainer cap allows you to pour water in one side (using the stock large-gap strainer cap) and wash out all the filth, water, and bubbles through the other side into a sink or similar without losing your stainless steel pins.
I broke my Component Catch while pulling 9mm and so I quickly designed and printed a new one. This doesn't have the ribbing like the original to attach a hose to as I never used that. Needs to be printed in a durable plastic (Maybe ASA or…
One of the biggest complaints about the M-Press is the die blocks. These will replace a die block, and allow you to use you standard die lock ring sets. These will allow you to remove the die/lock ring and place a new die/lock ring in…
Für Zusammenbau: Teil 1 + 2 mit Superkleber verbinden 3 Stk M4x16 Schrauben 3 Stk selbstsichernde M4 Mutter Gummiband Schraubverbindungen nicht festziehen. Alle verschraubten Teile müssen beweglich bleiben.
Replacement for the bullet feeder bullet release. Yes, I lost mine on my reloading bench and needed a replacement. Nowhere to be found, so I put this one together (fortunately, a buddy of mine could give me his, so I had the dimensions).…
My factory gasket went bad and started allowing powder into the bearing, causing the motor to stall. This part creates a nice, tight seal around the opening while still allowing the dropper to rotate without any tension. I trimmed up the…
I bought the Double Alpha primer tube filler and did not realize, that it requires the Double Alpha tubes to work. Well, I have a bunch of Frankford Arsenal tubes and designed this adapter to work with the tube filler. You have to remove…
If you're using Arsenal 1253 safe you can print the shelf and shelf holders for it. Printed in PLA, stores glock 17 on it and has no problems with durability.
Picked up the Frankford Arsenal funnel set and am really liking it, As I have all of my reloading equipment on peg board. So I made a custom holder set for it for the peg board. I've been finding it
arsenal champions wall plaque with separate badge no ams print badge as below start with red pause at 4 change filament to white pause at 6 change filament to blue pause at 10 change to gold for the main wall plaque start with white and…
A simple funnel for the Frankford Arsenal X-10 powder measure. Print with the big side facing the bed.
Stabilizes and increases the height of your powder trickler. Supports are needed. Scale the Z axis for height adjustment. printed with PETG.
With thanks to Printables user, steffanders for his very thorough work to create PET bottle PCO28 1810 thread standard models. IOWs those used on popular soda and water bottles. Published in Dec of 2022, it includes both caps and bottle…
LED London tube station sign for Arsenal Station. The models were split into parts to fit on the build plate then glue together. Feel free to download the fusion file to customize it for any tube station or make any edits you like! Layer…
Vaccum attachment for Frankford Arsenal Universal Case Trimmer. Attaches to 1.25" OD vaccum hose with a taper for a tight fit. ID of attachment will be a slight press fit to the case trimmer. Print with flat face down. During assembly,…
Frankford arsenal rotary case media separator bucket clip to secure the rotary unit
This is a Bahtinov mask for the Arsenal 130/650 (Sky-Watcher 130/650) telescope
simple trace of Czech arsenal proof marking
I made a case for the Arsenal Camera Assistant 2 Pro. Printed with PLA, no supports needed. Two version of the lid, with or without logo.
This is a model of a solar filter for the Arsenal Synta 130/650 telescope (similar to the Sky-Watcher N-130/650). It consists of three parts: an outer ring, an inner ring, with the solar filter film placed between them (in the example…
Arsenal Crossley armoured car scale model for display and diorama use, a detailed 3d printable military vehicle in stl format. This model is ideal for display shelves, tabletop dioramas, gift for military history enthusiasts, and…
These are tokens for the Electi Studio tabletop wargame Arsenal , created from the official token set: https://www.dropbox.com/scl/fi/6gice9y0qo3as1en74med/Blaster-07_Arsenal_Tokens_v1.pdf?rlkey=tw5eztdx0bwffcabh8qs7bn6m&e=2&dl=0…
another wall plaques to celebrate arsenal's long awaitied premier league championship win showing the cannon instead of the club badge on previous model printed in pet g or any filamenit you like started with white till layer 21 then…
This is the moment the Brentford Community Stadium erupted in our first Premier League game. Danish international, Christian Norgaard, also pictured, went on to seal the victory. You can watch match highlights here: Brentford open Premier…
I needed a way to store my Extra Turret for my Frankford Arsenal Precision Turret press so I designed that thing. A dust cover will come soon.
Angle wedge risers for Arsenal cast and precision trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather…
This is a Celestron Single Axis Motor Drive mount for Arsenal 130/650 newtonian telescope You will need: 6x M3x14mm bolts 2x M3 nuts
no support easy to print easy to setup
arsenal emirates stadium wall plaque printed in pet g for strength so can go outside as well as a man cave pause print at correct level to change from white to red
arsenal stadium wall plaque with separate printed ( filament colour changes required )badge glued into place start with red pause at 4 change filament to white pause at 6 change filament to blue pause at 10 change to gold for main plaque…
Recommend printing vertical with wide end down.
Arsenal football club n7 wall plaque made for a friends birthday check out my other arsenal wall plaques pause print at correct level to change from white to red
Replace the original box with this chute. Made to work with a 1" hose/tube
A quick and simple plaque for the football fan in your house. This was printed in PETG but works as well with PLA. The Gcode has a 'pause for colour change" set where it needs to be for the change of word colour. The STL are for you to do…
pretty simple works with most filaments. the plastic collets that come with it feels sloppy, these feel more solid and repeatable. works for my reloading. Simply remove the plastic collet and metal bushing, slip this in and adjust. I have…
Deflector that keeps finished cartridges from overshooting the ammo bin and ending up on the floor. Twists in place on the original Franford Arsenal stand.
For 10mm Frankford Arsenal small primer tubes.
The Square Funnel for Frankfort Arsenal Rotary Tumbler (F.A.R.T) fits snugly into the drum. However, it didn’t cause any brass loss from the square box during the filling process. The funnel is printed in PETG, but PLA should work as…
These are tokens for the Electi Studio tabletop wargame Arsenal , created from the official token set: https://www.dropbox.com/scl/fi/6gice9y0qo3as1en74med/Blaster-07_Arsenal_Tokens_v1.pdf?rlkey=tw5eztdx0bwffcabh8qs7bn6m&e=2&dl=0…
A remix of yzfdmeier's Frankford Arsenal X-10 Case Feeder Shuttle Block . I cleaned up some details that improved the overall fit and finish. Also, added a maker's mark to differentiate mine from his. To use, push the case shuttle towards…
