Counting matching models…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. Complete new design here available:…
This update to the Treasure Chest Puzzle Box is easier to print, assemble, and remix! Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. New design: better readability…
Overview and goals Flying pegasus is my most sophisticated glider so far. In this project I continued my experiments with single layer wings and stretch this concept to the edge. My goal was to create glider that have build in anhedral…
Features: No extra screws or glue needed Supports multiple tape widths and lengths - parametric Fusion 360 file available Pre-rendered versions for 14 mm, 18mm and 22mm tapes (max length ~150 cm) A universal wide slot to fit all metal…
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
This is my first attempt at modeling anything more complex than a toy rocket in fusion360. This box features print in place hinges and a snap / latch to hold it closed. The sides have mostly decorative handles. This prints well at .2mm…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE February 24th-Added optional side handles that are…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This is a remix of Uncle Jessy's Caliper Tool. I add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for helmets and other 3D printed armor.…
Note: For a larger version that covers M3-M10 sizes up to 100mm, see my Bike Scruler . For a version of that with metal inserts for the M3-M6 sizes and magnets, see my Etsy store . Quickly sort and measure metric screws and bolts in sizes…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
This handy angled bed scraper is multifunctional with a screw measure tool integrated in the handle. The screw length can be measured in mm and even inches. There are 3 options for the text available: Embossed Text Raised Text No Text…
Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…
***** Its a tricky print as the clearences are low, DONT GET DISCOURAGED if it fails ****** A multi-tool. The tool has a pair of pliers, a ruler marked in centimeters and inches, and a protractor. The tool is a useful item to have for a…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Those designs are a set of rings to measure the size of your finger and see what ring size you are most comfortable with. The files are designed and named after the US chart but you can refer to the ring size chart in the illustrations to…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…
Update : In V3 is the complete disassembled backcover of the Ally. Use standard if your PC has problems with the higher detail file ________________________________________________________________ Use V2 - Asus ROG Ally body with more…
Update 01/13/2025 I have added a teepoon-sized cup (5ml). The Tablespoon is around 15ml so you just need to print the 1/16th cup for this.…
I like this caliper a lot so I added it from thingiverse. Here is a link to the original. https://www.thingiverse.com/thing:1661962 Original Description: Summary this is a wip. i will be tweaking and adding files and information as i go.…
this is a measuring cup cup for when you do not want to do multiplication of division you can just add it
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Not educated in the ways of Pony Lore… So I have no Idea which Pony this is. But I did learn that it is an Alicorn which is a pony with both a unicorn horn and wings. Its main body is white with purple and pink mane. If you know the name…
Prevent your Asus ROG Ally from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps prevent stick drift…
This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Feeling the pressure to squeeze in one last gift this Valentine's day? This playful 3D print could help you in a pinch! There are three styles available - light, firm, and OUCH! Choose wisely. Be sure to print in PETG, and add extra walls…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
Here is a set of radius gauges. When I printed the case I moved the slider latch over to the side to allow easier removal of the support material, It worked pretty well. I forgot to mention you will have to move the smaller (2-9, 2-3,…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
Do you need measuring spoons? Here's a set of the most common measuring spoons for you, no support is needed! :) Print instructions Recommended settings: Layer height: 0.12mm or 0.16mm Perimeters: 3 Infill: 15%
Simple attachment to hold a tape measure
Here is a single print that measures inside and outside angles to within +/- 1 degree. It is one print with no support needed. The pointer hole provided me a medium press fit on the pin. This allowed the pointer to turn,, stay in place,…
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
This is a copy of a LEGO treasure chest. The model is 10x bigger (1000%) then the original.The chest in the photo is scaled at 40%. It cost me about 6 hours to design this chest. I used the original chest for reverences. The difficult…
Tool for Wood Screws Measure & Sort metric (Mesure de vis aglo/bois) for lengths to 10 to 80 mm and diameters 2 to 8 mm (half-unit 2.5/3.5/…) I've needed a tool to sort my wood screws. Optimized print profiles for Bambu Lab printers…
Ghost Face Scary Movie Parody Wasup Mask
Updates 2023/08: Updated the handles and the base on the 25 and 50 ml variant (v1.4). The new handles are scaled according to the cup size, are sturdier and look more appropriate. The base has been widened slightly, making them stand more…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
YouTube Video ( https://youtube.com/shorts/rRwxUmyBnUs ) Overview This model has a top portion that holds one end of the sewing tape measure and a bottom portion that can rotate relative to the top portion. The top portion has a ring that…
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
I originally made this for measuring out dog food, although I have included a blank version that could be used for other things. I am also including the Fusion 360 file so that it can be customized, including the ability to easily change…
There are 3 models with different attachment types for the Multiboard. It can be used for tape measures and safety glasses. The snap need to be printed with supports. There is also now a thicker version for heavier tape measures Credit to…
I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…
Print it at 0.2 mm layer height. two colors 10 % infill Grid. Check the model here: https://a360.co/3F0p4nY
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape. Printing Instructions…
This is a fully customizable parametric treasure chest. It does not require anything like screws or other to connect the lid and it locks when closed. Edit the included spreadsheet to change the width, height, depth, walls and plank size…
If you want to buy new ring and you are not sure with the size this is perfect tools for you to find it. I wanted to avoid different chart conversion so I just made ring with inner ring diameter in millimeters. So for example ring with…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
CALIBRATION MEASUREMENT 50mm - 40mm 30mm - 20mm 10mm total height 17 mm CALIBRATION MEASUREMENT FAST total height 7 mm Category: 3D Printing Tests
Another original creation you will find nowhere else! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
It's important for children's shoes to be the correct size. Shoes that are too small or too large can hinder foot growth, cause discomfort, and even lead to long-term health issues. Properly fitting shoes support the natural development…
Does not require any infill. Original model with Ø 28mm, rescale in your slicer to fit your own tape measure.
This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…
🇯🇴 مرحبا بكم في البتراء Welcome to Petra! Petra (Arabic: البتراء, Al-Batrāʾ; Ancient Greek: Πέτρα), originally known to the Nabataeans as Raqmu, is a historical and archaeological city in southern Jordan. The city is famous for its…
I was looking for a new scoop for my hot chocolate mix (since it didn't come with one) that was both good looking and easy to print ( 45deg angles or better! ). I was going to make just one, but then got carried away and figured they'd…
A hole diameter measuring tool which you can keep in your pocket. It can be used to check diameter of a hole where other tools might not reach due to tight space. The 14mm variant can measure 14mm, 12mm, …, 4mm diameter. And the 15mm…
My takes on the NPCs and Creatures from Fizban's Treasury of Dragons are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
remixed from https://www.thingiverse.com/thing:682146 Beefier and with a longer handle than the default settings. 0.5 Tablespoon 1 Tablespoon 1.5 Tablespoon 2 Tablespoon 3 Tablespoon I printed a couple of them and like how they came out.…
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
A rack for a Micro-ATX board. Perfect fit for my Asus B550m motherboard. Since I had a little trouble to find the exact measurements for the holes, a table with these and a DXF with the holes are included. Measurements both in Inch and…
Prints just fine with only 2 perimeters (0.4mm nozzle) and no infill. Also no support needed For reference: 1ml suitable for measuring spices 2.5ml equals the volumen of one average sugar cube 5ml-15ml Usefull around the kitchen 20ml-25ml…
IF YOU DOWNLOADED V1 - PLEASE DELETE AND USE V2 … Scaling in V1 was wrong … Sorry for that! We all know how it is … A bunch of screws on the desk … What kind of? Where is my caliper? Is it 12mm or 14mm? I looked around and searched for a…
This was printed with a 0.6mm nozzle, & 0.35mm layer height.
I am probably mistaken, but most screw measuring/sorting tools seem to be more bolt orientated as missing 3.5mm and 4.5mm in all other models and 2.5mm in most cases. I liked the one by Boogie a little longer than most, leaving space to…
This is a front cover for the Asus ROG Ally. Meant to be a super light-weight solution that's better than just throwing your device into your bag. Offers a barrier between your bag and device, covering the screen, power button, and front…
Please don't forget to like - I want my Prusameters! 😄 ###################################### I love good tools, but got a little bit mad with using my nice caliper for calibrating e-steps / rotation distance, because I got inconsistent…
Multiboard and Honeycomb Storage Wall holder for tape measures with a belt clip. Print upright without supports. Updates 23 Apr 2023: Added version B with unneeded material removed. Just choose whichever looks better to you. 03 May 2025:…
Summary Measuring tire groove Print Settings Printer brand: Zortrax Printer: Zortrax M200 Rafts: Yes Supports: Yes Resolution: 0.09 mm Infill: Full
Easy to get on the ring but won't fall off! Gcode prints one-at-a-time for less stringing!
Tape measure Holder No supports required, just rotate it with inserts on bottom. Also requires 2 empty inserts from original model. I uploaded 2 variations - with Honeycomb and without.
My print in place experiments culminate in this cool treasure chest that has functioning lock (and a separate key that opens it). After printing, carefully bend the lid and loosen the hinges, breaking any possible z-seam blobs inside.…
Treasure chest puzzle box inspired by The Legend of Zelda series. Reveal 3 triangles to open the chest! Materials Needed 2.5mm metal rod - 47mm long 2.5mm metal rod - 94.5mm long 3mm cylinder magnets (3mm diameter, 3mm height), quantity:…
I dropped one of my screw boxes and had to return this mess of screws and dog hair back into something usable. Measuring each single screw turned out to be a time comsuming pain. So this idea of a credit card sized tool turned up. You can…
This is a print originally designed by DrLex at thingiverse https://www.thingiverse.com/thing:2803507 wood textured chest with skull key
Pey's design does not fit my drawers well and requires severe modifications to make them fit after printing. I had to saw more than 3mm off the back and sand around 1.5mm from the sides. I wanted to do quite a few drawers so this was a…
Two of these caliper jaw extensions, fitted to your analog or digital calipers, allow direct measurement of the distance between two hole centres without any calibration or calculation. As demo-ed in my YouTube video: This is the STL as…
A radius measuring set (for both inner and outer radii), designed to fit within a 1x2x3 Gridfinity box. Notes: I didn't include 1 mm radius because honestly, I don't think it's really needed. The individual pieces default to being printed…
Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…
Say hi to Kumo, the cuddliest cub in your 3D printing forest! With his round little belly, chubby paws, and calm expression, Kumo brings pure comfort and charm in every print. Super fast and support-free, he’s your go-to pal when you want…
This is an MMU print of the treasure chest from Breath of the Wild. It's printed in several parts for the best quality but that does mean some assembly required. A little bit of super glue is all you need but most of the parts can just…
This remix of the Treasure Chest Puzzle Box has gone to the dark side. Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The weight is…
½ measuring cup I modeled the cup so it's a real ½ cup (125 ml) measure. Let me know if you would need a ¼ cup in the comment ! I 3d modeled the part but I do not own the 3d model since it's been modeled with OnShape. Not for commercial…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
