Counting matching models…
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
this is a lego compatible brick that has been made to be easier to print, as there are no small holes on the underside, which make it require supports. this version instead uses a bridge, so most decent printers can print this with ease.…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Bring the spirit of the tavern to your gaming table! This 3D printed Fantasy Tavern Mug is the ultimate prop for immersive Dungeons & Dragons sessions, LARP events, or fantasy-themed parties. Crafted with adventure in mind, it captures…
Print approx. €26.70–€32.64 excl. taxPreliminary estimate for one variant
Toilet - THRONE ROOM right side - sign, easy to print
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
🎬 Preview Images: The preview renders showcase the clean low-poly geometry of the animal figures and demonstrate how the models look both as standalone sculptures and in realistic environments . They highlight the minimalist design,…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
shaun the sheep toilet paper roll stand this is a complete new head design, print in 2 parts für quick and easy printing without support, legs print in vase mode the eyes print with color change at layer height 4,4mm glue the head parts…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I created a Ear Plugs Easy Case for everyone, who need case for Your noise canceling plugs :-) It is very simple and very practical. Is for everyone, who need protect Your ears agains noise :-) This model I created entirely by myself and…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Info: easy print no supports nice fit on original bricks
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
***DO NOT SELL*** ASK ME ABOUT TERMS/CONDITIONS ABOUT SELLING I'm back again with one of my biggest creations again!! The Articulated Snake!! Now, we are all wondering if this thing can jiggle and wiggle and it sure can. Sizes ranging…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
52mm lens cap with flaps for easy screw and unscrew
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7543982571361815830 ℹ Description: This chibi-style Dragon figure was custom-designed to combine mythical power with a…
Print approx. €5.87–€7.17 excl. taxPreliminary estimate for one variant
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
I designed these to add a bit of variation and help make dust less noticeable. Their main advantage is that nothing needs to be disassembled. They simply slide in from the side through their opening, fitting snugly without the need for…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is a model of a convenient sliding lid box with an easy to use locking mechanism consisting of a bump on the lid that keeps it securely closed. Note that for slim boxes the lid does not bend as much and the locking and unlocking may…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Update 12.12.23 - Add model A.1 and B.1, requested by a fellow, which adds 10mm of vertical space but maintains the same thickness as the original version. ---------------- I did this remix for 3 reasons. First, I want more space on the…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
WE DO THIS NOT BECAUSE IT IS EASY, BUT BECAUSE WE THOUGHT IT WOULD BE EASY You can find the frame here. → frame
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
This is a F-16 i made on blender. This is very easy to print and can be made out of most materials.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Very minimal and frugal FDM-optimized handheld fan for quick and easy printing. It takes only 30 minutes to print and uses just ~16g of PLA filament. For a color offset on the struts, change the filament after a 0.4mm z-height. This fan…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Sokar Hawk Restoration.
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Small animals that lives in your basement. Always hungry, they seek out and consume crumbs that fall from the mouse's mouth. Print instructions I decided not to cut the model and print it at once.
Print approx. €4.71–€5.76 excl. taxPreliminary estimate for one variant
Replaces blank in landing sensor bay in the Carbon Cub S2 with one that supports the EasyLights Magnet Adapter model. This will allow the EasyLights to easily attach over the bay. This requires the EasyLight Magnetic Adapter to use fully.…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
One of the biggest pains when using RC cars/trucks is when they flip over and you're not very close to your vehicle. This can be when bashing out with your buddies or when at your local track up on the driver's stand. With short course…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
General A nice two-color pendant version of the famous Buster Sword. Based on an original model by Jesse Baumes , released under CC BY-NC 4.0. Credit him if you create a derivative work from this one. I've made several modifications…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Basic info: Print time: 5-6 hours Filament: AzureFilm Silk Gold PLA Size: 210 mm (maximum of MK3) Weight: 100 grams Model is solid, you have to set top layers and infill to zero. Printed with 3 perimetres at 0,22 mm layer height to be…
Print approx. €5.51–€6.74 excl. taxPreliminary estimate for one variant
Single and double holder for AA batterie crates ( https://www.printables.com/model/173788-customizable-stackable-beer-crate-for-all-types-of ) to easily hang on and remove from HSW. It only fits the AA and empty version of the crates. I…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.69–€5.74 excl. taxPreliminary estimate for one variant
Its a sticker from videogame CS:GO Easy peasy
Print approx. €10.00–€12.22 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
This model is supposed to expand the use of the ProxMark3 Easy by making it more common in your work environment. 🏢 I need to say, before installing the ProxMark3 Easy on the model, you should first remove the middle layer of the…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
I just wanted to surprise my friend and made this out of: https://www.printables.com/model/1201746-bicycle-mini-sculpture Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro **Rafts:** Doesn't Matter Supports: No…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
I had to print with a brim and there isn't much surface area for sticking.
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
Fit is tight but perfect :-) My first drawing with Fusion 360 Sooooo happy about it. I had to work very precisely to meassure the two small nipple on one side and the hole for the screw on the other side. Did fit with first try. Well,…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
an easy-to-print mobile phone holder for any phone size
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.12–€3.82 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant
Nothing much to add here, I hope you like it and you remake it to something epic If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
EN : Some time ago I was looking for a box for my needle files and found a nice model from Clivebradshaw and remixed it with an label in 4 languages , see:…
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for one variant
In my search for a Gridfinity solution to organize my 608 bearings, I discovered one that meets my needs. However, I've faced a problem where PrusaSlicer begins printing the screw holes suspended in the air. To remedy this, I've added…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Aquarium feeder holder for the Juwel EasyFeed The feeder is meant to be used with Juwel Aquariums with a lid. The modern aquascaping/planted aquariums look so much better with an open lid and I needed something for the feeder to sit…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
my first attempt at creating something with tinkercad. print with supports as the tip of the pen is floating
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
The Dummy 13 by Soozafone is, in my opinion, one of the most brilliantly designed models ever. Its immense popularity speaks for itself—achieving an astonishing 2,000 downloads on its first day! I absolutely love the Dummy 13, but I…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Looking for a fun holiday print this season? Be like the muffin man and bake up a tray of articulating gingered cookies! They're super easy to print! Print the base in brown and swap out filament on the last couple of layers to show the…
Print info Nozzle: 0.4 mm Infill: 0% Supports: I use Snug supports, need to be painted like on the picture below Model Overview Two versions of Cats: Normal (white one) , Fluffy face (black one). Made bumps on face and paws so its easy to…
I'm really glad to present you the Glorious Baby Dragon For these Models I've used High Gloss PLA ColorMorph Filament made by Formfutura . That was the first time I used this Filament and the results are marvelous, I love it! Use the Code…
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Box Cutter/Knife 3000 Overview This 3D-printable box cutter is designed for effortlessly opening boxes sealed with tape. The cutter's sleek design, featuring the word "cutter" on the top, can be printed in either a single color or with…
This 3D printed TIE Fighter fan art model is built from multiple parts that fit together cleanly without the need for supports . Some parts may optionally be glued for extra stability. The finished model is a detailed reconstruction of…
Finally, here you see the new Little Grass Drake Articulated, Print in Place, Printable without Supports needed. I printed this model with 100% / 70% / 50% size and it worked fine. I also created a File with separated Eyes. So have fun…
Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…
Among us crewmates don't have a consistent style, and of all the models that I found, non of them was spot on what I had in mind when I think about the Among us crewmates. So I decided to make my own. At first I wanted to make a realistic…
This is deceivingly hard 8 piece durable puzzle box designed to be difficult to solve and simple to print. Any rigid material should work. However 2, 5mmX1mm circular MAGNETS ARE NEEDED. Other than that and a little glue it's ready to…
*Update: added STEP files & link to assembly jig . *Update: added STL files without text. I Saw Makers Cabinet's IRIS and had to have it, but the I found how much it costs and decided to design a 3d printable version. Maybe someday I'll…
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
Simple yet strong hook, perfect for hanging clothes, towels, bags, and more. The beveled edges are optimized for a great first-print result and to ensure they won’t damage fabrics. If you’d like to support my work, leaving a ♡ like ♥ or…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…
Dont forget to post your makes! I use the following settings to print this model with a hole for hanging: Orientation: Top Brim: 5mm Mode: Vase Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm…
██████╗ █████╗ ████████╗███╗ ███╗ █████╗ ███╗ ██╗ ██╔══██╗██╔══██╗╚══██╔══╝████╗ ████║██╔══██╗████╗ ██║ ██████╔╝███████║ ██║ ██╔████╔██║███████║██╔██╗ ██║ ██╔══██╗██╔══██║ ██║ ██║╚██╔╝██║██╔══██║██║╚██╗██║ ██████╔╝██║ ██║ ██║ ██║ ╚═╝…
A quick and easy chip clip. Has a tab for easy release and two lock positions for those extra chunky chip packets. Update: Added a slightly shorter, wider version. Update: Added versions designed for easy opening and a super-short version.
Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…
Cable Organizer / Cable Clip / Cable Holder Multiple sizes from 20 to 65mm No assembly required Only 16mm thick Easy to open Size prints on the inside Printing: No special settings or supports required, 0.2 mm layers 0.4 mm nozzle You…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…
Clean up your 3D printer workspace with this handy poop bin designed specifically for the Flashforge AD5X. This simple tray catches filament scraps and purge lines to keep your print area tidy. just print and place it underneath your…
Easy to use 2 mm increments Demo by きよさん:
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
***Updated: 06/15/2023 Added step model from ETP robot, for simple changes and for remixes of the model.*** Here you can find the first version of the " ETP-Robot , an easy to print, free moving action figure. The model is designed to be…
Interested in a 3D printed model of a QR code to give guests access to your home network that is protected by a 25-letter password of random characters? Or point your home/pet sitter to a web page with all relevant information for their…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Tic-Tac-Toe Game Set Dive into the world of 3D-printed fun with our sleek, modern Tic-Tac-Toe set! Designed for anyone who loves games and puzzles, this minimalistic yet classic version of the timeless game is both stylish and functional.…
This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed…
the final version of my glider model, which is very easy to print. all it takes is one print, a little editing, and it's ready to fly! Recommended print parameters: 3 walls 20% infil Material PET-G (can use PLA but PLA is brittle so there…
3 identicle parts that slide together in a satisfying way to create a cube. Once assembled it needs to be held and moved in a specific direction to seperate. clearance between the parts is around .3mm allowing for smooth movement without…
Bring medieval flair and rolling power to your tabletop games! The Vogland Castle Dice Tower prints support-free and delivers epic rolls for Dungeons & Dragons, Pathfinder, and other RPG adventures. 🏰 Designed for fast, easy printing — no…
An easy-to-print spiral passthrough fidget cone with a small pointy handle. A Quick Note: These fidgets take hours to design. Please consider subscribing to my Patreon to support my work and get access to my full library of designs , with…
Summary: The 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
This skull prints with basic tree supports and has a wide base I added to make it easy! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Printable without support. Holes for microphone included. Filament need 12m (2 perimeters 15% infil). Versions A, B, C, D, I, J, K, L, Q, R, S, T…..For phones with cover, max phone depth 21mm E, F, G, H, M, N, O, P, U V, W, X…..For phones…
Hi. Years ago I made a print-in-place chain design but it was a pain to print. These version is optimized for an easy print. Included a lot of files with different lengths, single link and a piece (clip.stl) to join or close chains. Hope…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Here I present you the Baby Bull Dragon This is a Print in Place model As always very easy to print without support structure, just load the File and start printing The joints are strong and sturdy You can get this Model without Name Tag…
![The Ultimate Finger Catapult [Easy to print] *Updated](https://media.printables.com/media/prints/941396/images/7192529_7d256018-9e3a-481a-9a42-30296430f78a_53933b0f-945f-46f8-bf3a-c4aaafb841df/afbeelding-van-whatsapp-op-2024-07-12-om-233547_1223b3e0.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Final Fantasy VII - Buster Sword pendant [2-color, gluing required]](https://media.printables.com/media/prints/9c57b357-c8fe-4be9-bb81-2f36aaaaaf81/images/10264395_ca46bf2c-ce37-4513-98b8-47618cb74c0f_18b94911-5949-4bb3-8488-32dc55a6317d/dsc02367.jpg)
