Counting matching models…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
This innovative bottle holder design serves a dual purpose: it allows you to cool PET drink bottles in lakes and rivers and easily attach them to backpacks. This makes it perfect for outdoor activities like fishing, hiking, and camping.…
⚫ Zetor Crystals UPDATE ⚫ Green zetor 8011 is not and will not be available for download! This update will enable the attachment of a trailer, on Tractors Zetors Crystal where this option was not available.…
Uchwyt do zamocowania wężyka 6mm na szybie akwarium. Jeżeli chcesz wydrukować uchwyt na więcej wężyków, po prostu wczytaj kilka razy model i ustaw jeden na drugim zwiększając odległość w osi Z o 8mm. materiał: PETG ściany: 1-2…
These little attachments will allow you to mount the 36x56cm Skadis to the side of the 30cm deep Ivar shelves (both from IKEA). They are very economical, all parts printing in less than an hour total and using about 15g of filament.…
This buckle can be used to attach any daypack to the front of the Osprey Farpoint 40 (by sewing additional straps onto the daypack), as only the Farpoint daypack is natively compatible with it. Many thanks to @herpderp_1457885 for the…
Tištěno z PETG trysky 0,4mm vrstva 0,2mm, 4 stěny, náplň 20%. V úzkém místě, kde jsou otvory pro zoubky klik z krabice, je dobré pomocí modifikátoru nastavit 100% vypnutí. @S adaptérem je třeba vytisknout 2 vložky pro umístění na krabici…
If you have ever maintained a swimming pool you will be familiar with this type of clip. I needed replacements and ended up designing my own. My priorities were durability and printability. I carefully chose the dimensions to make sure my…
The story behind these sliding hooks/gliders (in Romanian: glisiere pentru călăreți agrafe de perdea) is born out of necessity and frustration. After several of my original curtain gliders broke, I embarked on a seemingly endless quest…
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
This is a a three part adapter for 150mm portable air conditioner exhaust hose. All of the parts screw together and only the hose adapter part requires support. Print settings Infill 15% Infill pattern Cubic subdivision / Adaptive cubic…
I needed a way to inspect my gutters in the spring since the will fill up several times with leaves and maple tree seeds. I have a 20 foot extension pole, and this is perfect! turn on gopro wifi, and check it on your phone from the…
Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…
Porta Telecomando Faac XT4 868 SLH LR per auto, ideale da applicare sulla aletta para solo dell'auto. | FAAC XT4 868 SLH LR Remote Holder for Car, ideal for attaching to the car's sun visor.
Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…
The holder is attached to the top of the three screws that hold the extruder, and the other two are simply threaded through the holes for support and better flow. I have attached a photo. I designed it using the KOMPAS-3D software.
The insert provides rigidity to the spool bracket holder by attaching it to the printer's metal frame. You'll also need one 3x10mm screw, the same type used to attach the spool bracket holder to the rear cover. For best results, I also…
These connectors attach to a Skadis accessory using simple mounting holes. I chose this approach for slot connections as it offers a number of advantages: It makes accessory design simpler - in most cases, accessories can be printed…
Cable holder for attaching corrugated tubing to the wall, indicated to route your solar panel cabling to the junction box. Holds Corrugated tubing with zipties Print on the side in ASA or PETG. use inox screws to hold to the wall.…
Mercury Mercruiser Marine Screw Attaching Latch 98889 replacement part. Print in pteg, no supports
Plastic hook for attaching the goal net BERGER-HUCK https://berger-huck.cz/sportovni-site/prislusenstvi-pro-brankove-site_17446/plastovy-hacek-k-uchyceni-brankove-site_1010 Print Settings Printer: TriLAB DeltiQ 2 Rafts: No Supports: No…
Collar and support for attaching 4" flexible dust collection hose to dust collection bin, there is a flat collar for tight spaces and a tapered collar with wide opening
I needed a clip to hold a standard “sawtooth” style picture hanger on gridwall. Works well in PETG as the tolerances are on the tight side so that frames can't fall off the gridwall (the PETG can be flexed to get it over the hanger). Also…
i made a clip for the cable to attach to the drum extension
Info: end point for articulated arm by Jack it is reversed - articulated arm male joint is inserted in the bottom, so on the top, you can place any hook that fits your requirement like I wanted hooks for our electronic babysitter/nanny…
I print these with PLA. Just unscrew your Kallax and put back the screw with the foot. You can also add a washer.
Info: round end point for articulated arm by Sneaks articulated arm male joint is inserted in the bottom, so on the top, you can place any hook that fits your round requirements like I wanted hooks for our electronic babysitter/nanny…
Using this holder with "Klippbok" like the holder for "Badring" increases user-friendliness considerably. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you…
Remixed so I could screw it to the wall.
Element for attaching a shower head to a hose
I really liked the original design but I wanted to attach mine to the wall as 4 toothbrushes take a lot of space, so I added a small wall that I intent to glue to the wall with some montage glue or strong two sided tape (did not want to…
Bez nutnosti vrtání, či šroubování, pouze se zasune do již předvrtaných otvorů ve skříni. -------------------------------- Without the need for drilling or screwing, it is simply inserted into the pre-drilled holes of the cabinets.
Slider for attaching the caravan partition - roll-up door Jezdec pro uchycení karavanové příčky - shrnovacích dveří
Nicht jede Pflanze möchte von oben gegossen werden oder verträgt Wasser auf die Blätter. Zarte Pflanzen werden oft runter- oder plattgedrückt, wenn sie von oben gegossen werden. Nimmt man den Brausekopf von der Gießkanne ab dann kommt aus…
The hook is made from flexible filament, which prevents any risk of injury from the part. Print instruction: material: Flex Hard - any other material will work also layer height: 0,3mm nozzle: 0,6mm (0,4mm) support: no enclosure: not…
This is an adapter to mount a Serfas TSL-S250 bicycle headlight to a Planet Bike mount. The adapter is designed to remain attached to the headlight when it is removed from the bicycle. Print instructions Category: Sport & Outdoors
This is a rope clip designed to attach a rope protector for top rope solo or rope access setups. The design is inspired by the excellent “Rip Strip” Rope Protector from Avant Climbing . I originally made this as an excuse to do some TPU…
This is my option for attaching an Amazon box to an opengrid board. Printed with a nozzle 0.4 layer 0.2 PETG or PLA
Very simple clip to attach a 10mm LED strip (e.g. innr flex) to a 20mm (diameter) curtain pole with bottom run. You can print it without infill and with only one perimeter, even in vase mode. I recommend ~2mm brim to prevent detachment.…
I drilled four holes into the feet of the Doe workpiece to secure it to the stand for my project.
EN: Cardo packtalk intercom back attaching point of the helmet mount, I recommend to fix it to the mount via double sided tape as I have done. Model can be rotated to print easily with fewer supports, I recommend rotating it 90º on the x…
This product is used to attach a cutting board under a kitchen wall cabinet. The cutting board (PP) is 8mm thick and easy to reach (thickness up to 12mm will be acceptable). This way the boards take up less space, are easy to clean and…
Impression en Polycarbonate - Sert à fixer lépuisette au bout du mât
EN: Simple coupling for attaching the plastic gutter to the gutter hook. The coupling is inserted or screwed into the half-slot in the gutter and then slid onto the plate at the end of the gutter hook. CZ: Jednoduchá spojka pro uchycení…
After hacking together motorized Ikea Kadrilj and wide manual Fridans blinds, you might have some spare parts for both products. This adapter can be used to install Fridans control wand to Kadrilj-blind, so you don't have to throw useful…
These are designed at 10mm wide and deep. They should be added to another objects surface 3mm below the plane so that the top of the base is level with the edge. Don't forget to maintain the void for where the other tab fits
D E U T S C H Halterungen, um die Pro-max Steckdosenleisten aus dem Action (2520461) an einer Tegometall Lochwand zu befestigen. Zwei Versionen, die eine sitzt beim kleineren Lochabstand strammer, ist aber am Ende völlig egal, hält auch…
Es handelt sich um eine Halterung, die an ein SKS-Schutzblech mit einer Breite von 53 mm angesteckt wird und sehr fest sitzt. In der Halterung ist eine 6 mm große Bohrung vorhanden, in die der Dübel mittels Sekundenkleber eingeklebt wird.…
The front wheels came off of the kids playmobil cart. I'm not sure how they were originally attached, but I whipped up this little clip to hold them on. Printed in PETG with 100% infill and it works like a champ. Category: Toys & Games
when placing indoor plants on the windowsill in winter, additional lighting with phytolamps is necessary
Holder for attaching a laminate board 18mm x 200mm it can be both on the stand and on the shelf
Die Aufsteckhilfe kann mit dem Griff, oder ohne auch an eine Wand geschraubt werden und eine ohne mehrere Scheiben aufnehmen. Drucker Prusa MK4 Material PLA Infill 15% The attaching aid can be screwed to a wall with the handle or without…
The plugs for the bolt holes will be adjusted Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: NO Resolution: 0.2 Infill: 40 Filament: PETG, PLA (with black lack)
A remixed version of the Samsung TV remote with a cylinder to allow a rope up to 5mm in diameter to be attached so you can't loose it! Designed for a TV in a clubhouse where the remote just keeps walking off, now it won't. Printed out of…
Attaching the Snapmaker U1 feeders to the printer cover. Прикрутити гвинтами до задньої стінки.
Clips to attache steel wiremesh (wire diam.5 mm) to steel tubes (square 30 mm) to make a fishpound safe for Children. Print Settings Rafts: No Supports: No Resolution: 0,2 mm Infill: 75-100% Notes: Printed in PET-G (in use for over two…
This is a building block for more complex projects and includes 2 elements to attach things to the side of a heating radiator. Since it will only work with a radiator just like the one I modeled it on please check with the photo. It is 2…
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
멀티탭을 스피드랙 내기둥에 부착하기 위한 후크입니다. 오래전에 OpenSCAD로 만들었던 후크를 사용하여 급하게 FreeCAD로 슥삭 했습니다. 내기둥에 부착하기 위한 목적이라 한 쪽으로 치우쳐있습니다. 외기둥에도 아마 붙을겁니다. Printing: 옆으로 눕혀서 오가닉 서포트를 넣고 인쇄하세요. 멀티탭 붙이기: 3M 아크릴 폼 테이프를 사용했습니다. 아마 몇년간은 단단하게 붙어있어주겠죠.
The housing is screwed together from two parts. There is an opening for the USB port on the back. The camera can be attached hanging. There are two mounting holes, either for cable ties or screws.
A box for sorting blocks with studs on the drawers for easier marking of blocks. To place the figures on top of the shelf, it's best to press the block in. No glue is needed; it fits just like a press fit.
Клипса для для крепления ручного инструмента GROSS и подобного на веревку.
Easily attaches to the pump body with double-sided tape, securely holding the attachments in place. Keeps accessories handy and perfectly complements the original design of the Baseus SuperMini Pro.
An outlet for additional filament tube mounting. Mounts to two tubes or one.
It's installed (screwed on) in place of the filter's stock water intake. The fitting diameter is 32 mm. I made it to connect the stock corrugated hose from an INTEX pool filter. I connect a tube with a brush from an old vacuum cleaner to…
Where the Blue Kondor alights, trees grow NATO rails and camera's hang off lamp posts I do all my filming outdoors in nature and the available mounting points for cameras are large and oddly shaped. This clamp allows you to attach heavy…
My wife didn't have the strength to move it, so I came up with the idea of attaching wheels to the Klarta Store 2 air. Printed on a 0.28 layer with three strokes and 25% infill. You need to print the right and left (they differ in the…
Printed in PETG, but PLA(+) should be fine, too - depending on the weights that it is supposed to hold.
This is a base clip for securing the rack to a shelf underneath. I used for the 20mm variant.
Pro kamaráda jsem vyrobil uchycení pásků ke staršímu snowboardu. I made a strap mount for an older snowboard for a friend.
If you have purchased a SCULPFUN S9 laser machine but are disappointed with its power and are considering purchasing a more powerful laser head, but do not know how to attach it, this 3D printing clamp model can solve your problem by…
Кронштейн для быстрого крепления фонаря на каску, поверхность и т.д. A bracket for quickly attaching a flashlight to a helmet, surface, etc.
The wall boxes in my house are too shallow, and the screw posts inside the back box protrude into the space occupied by smart switches. I wasn’t comfortable modifying the housing of the smart switch or forcing the wiring into the limited…
Holder for attaching a laminate board 18mm x 200mm it can be both on the stand and on the shelf
Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…
Pro kamaráda jsem vyrobil uchycení pásků ke staršímu snowboardu. I made a strap mount for an older snowboard for a friend.
Клипса для для крепления ручного инструмента GROSS и подобного на веревку.
