Counting matching models…
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
This is my model of the Space shuttle Endeavour OV-105. The model is a kit and does not require any glue. It is roughly 50cm long and has several features. The cargo bay doors can be open. It has posable arm and the satellite could have…
No more toothpicks and refilling the water every day! With this floating grower, the avocado seed will stay submerged evenly for weeks! As the water evaporates, the floater will simply go down with the water level. Once the avocado is…
Result of office Avocado seed floater challenge. Printed in ONE piece. Mechanical lock. It is easy to open when the roots come out. Before use, you cut out the 1 layer brim between the lock.
Keep the bone clean. When you eat this superfood, be careful not to cut it. Wash it to remove any meat remains that may be attached to it. Identify its parts. Although the bone appears spherical, it is key to know which is the upper part,…
This is a booster pack for the Space Shuttle Edeavour . It consists of the Orange external tank and two Solid Rocket Boosters. The pack is attached to the Orbiter using the holes for a stand. In the suffix of the files, there are color…
Put it in a glass of water and place an avocado seed into the hole. Few weeks later the seed will start growing its roots.
Do Avocado float your boat? This quick-to-print no support design can help you grow your Avocado seed without much intervention. Forgot to water the plants? No worries about this self-watering solution. All you gotta do is position the…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print and build this scale model. You can build it as “shelf” model or add RC components and take it for spin. Model is in 1:32 scale and ready for any FDM/SLA printer. Except of tires, whole model is printed from PLA. Tires are printed…
This is remix of schweiz9394's remix of FragrantAbyss's bullet puzzle . Its intended to be a puzzle giftbox with not too easy but not too hard maze to solve. In chamber you could put giftcard or small gift. I created new bootom part and…
In a galaxy not so far away, the classic Benchy got a serious upgrade. The Benchy Star Destroyer combines the familiar curves of everyone’s favorite 3D printer test boat with the angular might of a Star Destroyer. It’s the perfect blend…
A remix of the 54 mm Umikot for the 51 mm post-millenium La Pavoni filterholder. See the 54 mm version for instructions. The basketdepths are: Standard double: 26 mm IMS 14-16gr: 25 mm (not tested yet!) IMS 16-20gr: 29 mm (not tested…
This Keychains can Join together and be used as one or by you and your friend or couple. We hope you like it!
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
who doesn't know it? you always have to dig around in the Chunky Flavour to find the spoon and end up with sticky fingers. That always bothered me. That's why I created this spoon holder so that the spoon is always within easy reach. The…
This is my version of a hose guide system, designed to print in two separate pieces. I wanted to avoid using any hardware because, realistically, I would probably forget to remove it at some point and end up destroying it. So I decided to…
Avocadoboat 2.0 A floating boat germination holder for avocado pits/seeds! You can leave the boat floating on water, so you don't have to worry about the water level and can grow your own avocado houseplant. The 2.0 version has improved…
Thanks to vladua for the great wind turbine. I enlarged the wind wheel to a diameter of 170 mm and a height of 196 mm and adapted it to my proven bearing for an 8 mm metal rod. The wind turbine parts can be put together without reworking,…
Use to start an avocado plant before planting it to make sure it sprouts. Just put in the pit with the root end down and fill the cup until the pit is half submerged,
Favored of Ra” is a hand-paintable bust inspired by the spiritual elegance of Ancient Egypt. Adorned with detailed traditional symbols and calm facial features, it stands out as a stunning artistic and collectible model. Its ornate…
After V1 (2016), V2 (2022) now I made a V3 of the original Avocado Boat! This time with a small slot in the back that makes it easier to take out the seed when it has grown a lot of roots! Avocado Boat: A floating boat germination holder…
I finally took the time to tidy up my Predator file data base all of which were .PDO's that I have been collecting over the past several years. Unfortunately I cant give credit to the original designers because I no longer have access to…
A simple holder for Cirkul flavor pods. Includes a drain so no moisture builds up.
I believe in having little tools out of drawers, just my favorite few ones that I use almost daily. This holder will fit just three pens/markers/small tools. To organize and minimize the "paradox of choice". Fits SKADIS system and…
Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…
Compatible with the Mk4 Fillment Guide! Also, Stronger, Smother, Faster! (sort of) A more sturdy filament clip that keeps the critical dimensions of the original while taking inspiration from @alexan_e's remix to nearly eliminate friction…
An Insert for Endeavor Deep Sea If your printer is monofilament, don't use the (color) files. If you have multifilament printer : - the STL “1 (color)” file matches with the STL “tuiles ocean 1” (and the same for 2, 3,4 and 5). - The STL…
I wanted to create a filament savor for the Qidi Box that doesn't require using any double-sided tape. I used ASA GF for mine. Materials needed- m3 Heat Set Inserts- 2 per filament savor m3x6mm socket cap screws- 2 per filament savor PTFE…
Maquette 3D de la "Villa Savoye", architecte Le Corbusier. http://fr.wikipedia.org/wiki/Villa_Savoye http://www.villa-savoye.fr Dessin 3D : échelle 1/250 Impression : 140 % Escaliers : 0.1 mm Rampe : 0.1 mm RdC - R+1 - R+2 : 0.2 mm…
Can we make the best just a little better? Yes - we make it a bit simpler, easier to use and add some grip! My favorite filament clip until today was the “Grandma's favorite filament clip” by Extrutim . There was a thing I did not like:…
Rear lip for your car to get that extra downforce everyone needs. To print you'll have to cut it in your slicer to fit your 3d printer or you can you pre-cut file I used I printed mine in 6 parts oriented vertically and glued it together…
NB: V2.1 has been updated to use proper threaded thumbscrews. Note that V2 had a problem with the thread direction so has been fixed with this latest update. I wanted a way to mount my Honeycomb Alpha and Bravo flight controls under my…
Be sure to follow me here at Polymathic Designs . My Funny Signs Collection is here. Post your makes of this I would love to see them, feel free to ask any questions about printing. Print instructions Printer Brand: Ultimaker Printer:…
Maid of Favonius. Noelle. Genshin Impact.
Meet Mini Avocado Buddy , the tiniest, greenest friend you’ll ever have! 🥑✨ ✅ Adorable & Tiny Design – A fun and playful desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅ Lightweight & Quick Print –…
Cute avocado keychain charm. Snap fits together no glue required. Comes in two sizes small and large. Place black plate in green housing, then insert yellow into green housing. Then insert brown circle. If you like my designs and would…
Should print with just about any settings. The wand in the photo is printed in eSun Yellow PETG with a 0.4mm nozzle with the PrusaSlicer 0.15mm Quality preset.
Desktop DIN Rail Stand 75/90 degrees - Supporto barra DIN da Tavolo Dimensions 58x100x15mm DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 15/07/2024 ADDED REV1 Resize/Scale to adjust dimensions If you download/enjoyed this file, please leave a…
Yeah that small drone is flimsy. I do understand, betafpv shaved every gram to keep that thing as light weight a possible. But I really didnt like the fact, that this small beast will tumble all over the floor the moment you up it on the…
Hi! Grow Your avocado tree today! Prepare a: Glass / Jar / Mug / or anything you can pour water into Avocado seed Some water Planting instruction: Print "Avocado Seed Holder" Pour water into a glass Put the seed in holder (so that ⅓ of…
use the .3mf file with color change
Remixed of two -I used a stencil font to punch the type of filament into the tag. It will print at 0.2mm ok, but at 0.16mm you'll get better quality and surprisingly for me, it was about 1% faster ;) Print is solid - it's small and fast…
My favorite Jack Russell terrier
Should print fairly similar to the original design, I found my best results though at 0.16 layer height and printing the parts at an angle of XYZ 90, 45, 45. I think 0.2 layer height would work fine as well. Using the auto-orient feature…
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
dekorace pro halloween, nohy pavouka se dají vytvarovat teplem
Sollte die größe nicht passen einfach 1% größer oder kleiner Drucken.
Wanna sell my designs? Join my patreon: https://patreon.com/filar3D - Focus on selling, I do the rest ;) Get the Chains here: 👉 https://temu.to/m/ejj2809ev7e 8 Variations Included (2 seeds, keychain and non keychain versions) Make a full…
Parejita de aguacates llavero perfectos para compartir con esa persona especial. Tamaño: 22mm x 13mm x 28.5mm.
This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the…
This Helix Wind model has been modeled to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was developed to test…
Changelog: 2024.01.27 : Add file pavo_pico_duct_with_feet_flanged.stl: Height is +1mm to a total of 6mm Flange the base to +1.5mm all around for added strength and overall stiffness Lightweight replacement frame duct for the BetaFPV Pavo…
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
Easy to make a cute Avocado keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
Introducing the Avocado Slicer, a kitchen tool designed for avocado enthusiasts who crave both efficiency and durability. This slicer seamlessly combines lightweight portability with robustness. The lightweight nature of the slicer makes…
Wenn du nicht jedes mal deine Finger beim Löffel rausholen in Pulver baden möchtest, ist das die Lösung. Passend für die 150g Dose. Einfach und schnell gedruckt. Falls die Reibung nicht ausreicht, dass der Halter nurch durch eindrücken…
Simple Avocado seed starter which fits ordinary cups, mugs or glasses. Eat the Avocado, clean the seed (peeling the brown layer is possible, but not necessary) and put into the printed seed starter. Hang the starter into a cup or glass,…
Case for DJI O4 Lite – Fits Perfectly in the Pavo 20 Pro Frame This custom case is designed specifically for the DJI O4 Lite and fits perfectly into the Pavo 20 Pro frame. All buttons, ports, and wires are easily accessible. It also…
I made these to clip on the flex steel bed sheets to avoid warpage on large models. I wanted to make some that didn't require any screws. These should fit pretty well. Make sure to print them out of something that can withstand the heat.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a simple, light weight stand or landing gear for the Pavo20 series with 3s cells. It helps to stabilize the copter for a controlled take off as it will not roll over the lipo pack one or the other side. The idea is not from me but…
These hand grips/handles were made 1:1 with measurements taken from the official Boeing 737-800 specs. Instructions: Unscrew the existing small handle from the 2 engine honeycomb bravo airliner handles Pull the small finger grip off Push…
No supports needed. It is suggested to use more than 3 perimeters. Please wash it well after use to prevent bacteria buildup.
Thanks to astfaellergerald for the Vertical Windturbine Ver. 2. I like version 2 (NEW P1-5) by astfaellergerald very much, but cleaning and gluing all the parts takes some work. I've been contemplating putting the top and bottom halves…
Update: I added an alternative inner part with a smiling face. You can paint it using a Sharpie or utilize a multi color printer to make it more present. Original Looking for a quick and charming print that brings instant fidget…
Fits Pavo Pico O3 and 6 batteries. (Betafpv and Tattu 2S 450mAh) ! Added version (R4...) with smaller outside radius to enhance printability -Place Supports under the latch part of the Box, so supports needed elsewhere -Glue a small piece…
Based on different scientific papers I created this Savonius two blade shape wind turbine design. It is specifically designed to work well with low wind speeds coming from one direction. The turbine needs a obstacle wall in front of the…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
A minimalistic floating boat for an avocado seed, customizable with OpenSCAD The boat is printed in vase / spiral mode to ensure that it is as light as possible and at the same time so small it fits into a water glass. The prepared stl…
Print with TPU material Layer0.2 mm infill 15% Secure the pad with a tie on the frame
This is the main ADDON to the Endeavour Space shuttle. This Addon gives you possibility to print different shuttle orbiters - the whole fleet actually. It is divided to individual folders and each consists of the shuttle parts, that…
Print Settings As it is for outdoor used i reccomend using PETG. I used a .4mm nozzle and did 3 walls for a 1.2mm wall thickness. I used a 10% infill on all parts. the only part that needs support is the Blades , not for the blades…
Found these really cool Halo helmets created by Tony over at the 3DWarehouse. https://3dwarehouse.sketchup.com/model.html?id=4fe36c00609c4f29f64801ad2940cdd5 Will need some work to tidy up some of the mesh errors but very cool all the…
JONNY BRAVO figures Hey mama! Bring some classic cartoon attitude to your collection with this Johnny Bravo inspired 3D printable figure 💪😎 This model is designed as a multi-part snap-fit build , so you can easily print each color…
BetaFPV Pavo20 Case with LiPo and accessories slots. Dimensions So as said in the title It is made for a BetaFPV Pavo20 . The batteries I use are 3S 450mAh . If you would like other sizes, tell me ! The others solts in the top part are…
A Savonius-type wind turbine you can connect to a Lego axle. It comes in 2- to 6-bladed variants. The blades are semicircles with inner and outer diameters 40 and 43 mm respectively. The middle is a circle with a diameter of 9 mm. The…
Simple, and keeps the filament tightly wound. Sliced with 15% infill on my Prusa Mini, it uses .28m of filament, .83g, and takes 8m. I love this filament clip, and this is an upgraded version - the outer clip has a potential for breaking…
Be sure to follow me here at Polymathic Designs . My Funny Signs Collection is here. Post your makes of this I would love to see them, feel free to ask any questions about printing. Print instructions Part 1 and Part 2 are for dual…
Maple leaf generated from picture. You can customize your size from the bigger model "maple leaf.stl".
Funny sign on HOW to avoid injury at work.
Princip hlavolamu je jednoduchý, naskládat všechna čísla zpět na podložku - to ale už tak jednoduché není. Nápad to není můj, je to vytvořeno podle obrázku, který jsem zahlédl někde na Pinterestu.
Avocado boat for your large-scale avocado farm. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Notes: Need to be watertight. Category: Outdoor & Garden
Overview These party crackers are a fun way to give guests party favors, decorate place settings, and are sure to make any party memorable! Not only is there plenty of space inside to hold candy and small toys, but there's an added twist…
Holds up to ten clips, original CAD files available so you can extrude the walls up/down for more/less capacity. Hopefully a little more space-efficient than hanging/rack designs. Each clip is 4mm tall.
use the .3mf file with color change
An alternative to Cirkul's $20 piece of plastic, this print allows you to store, protect, and dry the flavor cartridges for your favorite water bottle, without sealing all the moisture along with it. Designed with special draining…
Meant for Beyblade X from what Leftburst said
Altavoz amplificador pasivo para el smartphone. ACTUALIZACIÓN! V2 V1: Con soporte para estantería. SALIDA + CODO + BASE MOVIL GRANDE (O PEQUEÑO) V2: Modelo simple, sin soporte para armario. SALIDA + CODO v2 ¡Ninguna pieza necesita…
The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers
Solution: 1. step 2. step 3. step (back) That's it!
Kevin is a very lively, exuberant worm. What is his favorite food? Obviously the BANANA! The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and to brighten up your days. Collect them all!…
Protection de batterie pour les BetaFPV Lava 550 3S LiHV utilisées sur lesPAVO20Pro entre autres. Système d'accroche de la prise d'équilibrage inclus !!! A imprimer en TPU, 3 parois, 0.20 layer, nid d'abeille 3d 10% max d'infill pour…
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
Simple Savonius wind-mill. Ii requires 2 bearings on top/bottom of support. Can be printed with small supports, 0.4mm nozzle and 0.2 layer height.
2024-10-21 added different height spacers, Carto should be 2.6mm to 3mm Z distance to the nozzle added Esoterical offset measuring tool from Carto Discord (Carto's coil pcb on the “hills” and nozzle on the long flat side) this is a remix…
