Counting matching models…
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
Phone Stand for Huawei P20pro, landscape orientation, 50deg angle. Speaker is not covered, and access USB port is given. Perfect to watch Videos, YouTube, etc. while traveling. If you are looking for a portait version, check this out:…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for PETGSource material: PET
Phone Stand for Huawei P20pro, portrait orientation, 60deg angle. If you are looking for a landscape version, check this out: https://www.printables.com/model/175040-landscape-phone-stand-for-huawei-p20pro
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for PETGSource material: PET
A simple charging stand for Huawei Watch Fit 3 (and Fit 2). STL is in suggested printing orientation, you will need to use support for best result (recommend using organic supports).
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
Da ich keinen Ladeständer für eine Huawei watch GT 2 gefunden habe welcher mir gefallen hat und auch ein "geschlossenes Metallarmband" unterstützt, die meisten sind für die normal enthaltenen Gummibänder und diese müssen geöffnet sein,…
Chargingdock for Huawei Band 7 & 6
Compatible with the new Huawei GT5 watch Enable support before printing
Basic cover for Huawei P30 Pro. Want to send a tip? Paypal: https://paypal.me/cubikspot BTC: bc1qp7c9nllsetqf73zu76wrwxcrrks4ctpp04rnpe ETH: 0x1709A6042EAF5D36f9F4B3C3Fb4B9BC2dF9EEeaf LTC: ltc1qxwkvr2c6drmg9vdgkdcwrgk6lw4h07pnhfuxwt Print…
My personal huawei band 6/7 charger stand design. Complete with cable glands, convenient and simple. The only place where supports may be needed is in the hole in the charging socket. It's not a remix, but I was inspired by that:…
Huawei Watch Fit 4 - Charger Watch Stand Dock A simple solution, to turn your new Huawei Watch Fit 4's fantastic magnetic charger, into a sleek and desktop friendly, charging stand. Just pull the USB cable through the hole, and press the…
When I design this, I had two goals : Make a balanced stand with the original Huawei charger No visible cable You will need 4 screw : 2 M3 x 10mm (max 12mm) for leg/foot 2 M3 x 16mm for leg/high Hope you enjoy it !
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces. STL files and hardware: Fit 80x80 mm and 120x120 mm fans. To mount the fans four…
Stand for charging my Huawei Watch GT 3 Pro. There is a right and a left version. The model has built in cable guide and room for cable storage. Prints without supports. Other Watches from Huawei may have the same charger. Charger…
1 Version = mit Seitendeckel zum verschliesen des Kabelkanals 2 Version Wie das Original nur passend für GT3 Unterseite hat eine leichte vertiefung um doppelseitiges klebeband ran zu machen. Version 1 - Dort den Deckel einfach mit paar…
Bottom is flat. Case is tested. Best printed slowly in TPU.
I was looking for a charging stand for the Huawei Watch GT3 but couldn't find a suitable one, so I designed one with Freecad. The slot for the cord is intentionally a little tight to keep it snug. By the way, you can also use it to charge…
Bottom is flat. Case is tested. Best printed slowly in TPU.
I've made a charging stand for a Huawei Smartwatch GT 2 Pro. Just put them together, No gluing, No screwing! Print instructions Model created with tinkercad Printed in Prusa PETG orange 06/20/2023 I created a new top (Alza). The wider USB…
Huawei Mediapad T3 10 inch Tablet Holder print it with support everywhere Print Settings Supports: Yes Category: Tablet
designed in a hurry in fusion360, wanted to test a new 0.6 nozzle on my original Prusa MK3S (first generation). As you can se, it is printable just fine @ 0.2mm as long as you orient the part with the overhang towards the front of the…
Huawei GT4 Watch Charger Holder Stand 46mm
Charging Stand for the Huawei Watch. The charging puck fits snugly, the ridges allow for some variations in printer tolerance. The cable fits through the stand and emerges from the base. I have also included a version without the Huawei…
This charging dock is designed specifically for the Huawei Watch GT 6 Pro , giving your watch a clean, stable, and elegant place to recharge. The model comes in two versions , so you can choose the cable routing style that fits your…
Slim Phone Cover for Huawei P20 Pro
Didn't like the options out (not many) so i made my own. Friction fit charging cable then hot glue to secure. PLA INFILL 25% Use support if need. Or just tip on its side.
Huawei P20 Pro Case with Gyroid Mesh backside. Prusaslicer project with Huawei P20 Pro plain case, layer modifier printing just infill mesh for backside. I printed mine with PETG and 0.6mm nozzle. If using 0.4mm nozzle mesh can be mad…
Cool look charging dock station for HUAWEI WATCH GT 5. It is best to print with 100% infill for better stability. The design has been changed to make it easier to remove the charging module from the holder.
Ich habe mal eine Halterung für eine Huawei Watch GT2 gemacht, mit integrierter Ladestation. Das Loch in der Mitte ist dafür, dass man die integrierte Ladestation wieder herausdrücken kann. Gedruckt wurde es wie im Bild zu sehen , im…
Extended stand for Huawei Watch GT5 Pro with larger cradle slot. Based on original GT5 model.
I adapted the Samsung Galaxy Watch 5 Pro/6 Charging Stand for the HUAWEI WATCH GT 3 Pro and made the base thicker to give the stand more weight. Habe das Samsung Galaxy Watch 5 Pro/6 Charging Stand für die HUAWEI WATCH GT 3 Pro angepasst…
Designed and printed this case for the Huawei P20 Lite. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.1mm Infill: 10% Category: Mobile Phone
This is a wireless charging dock for the Huawei Watch GT2 smartwatch. I use a "ring" style strap on it, so it was stressful to take the charger and put it inside the strap in order to charge it every time. So I decided to design a…
Should also work with a P30 Pro. This design is for the preinstalled Volkswagen Passat B7 phone socket. For a easy printability I have created three parts. This design allows the usage of the fingerprint sensor and also allows plugging in…
This is stand for Huawei Watch 2 charger. It allows to rest a watch easily on the charger and see it's screen. It is created in SolidWorks. You can find all the SolidWorks and Step files if you want to edit it. GrabCad:…
Few years ago I designed a watch charging stand for my Huawei gt watch. I have been using it for a long time, but recently it was dropped and it broke. And since I had to print a new one I thought I might as well upload it here. The stand…
Cool look charging dock station for HUAWEI WATCH FIT 3. It is best to print with 100% infill for better stability of the
Modern charging station for Huawei GT5
Charging Stand for Huawei Watch Fit 4 Pro This is a simple and practical charging stand designed for the Huawei Watch Fit 4 Pro. The stand keeps the watch in a stable position while charging and helps organize the charging cable on your…
Teile Ausdrucken und ineinander drücken oder kleben.
Note that this design will only fit charging pucks that have a fixed (non-detachable) USB lead! OK, so this is a ground-upwards revision of Vibekiller's lovely charging stand, found here: https://www.thingiverse.com/thing:5757356 I LOVE…
Nice Stand for HUAWEI WATCH FIT 4 Pro , just need some minor modification from the original one to fit perfectly.
Bottom is flat. Case is tested. Best printed slowly in TPU.
FUNDA HUAWEI P30 LITE HOTEND: 225 A 235 CAMA: 50 A 60
Reliable headphones require reliable protection. I decided not to buy a ready-made solution, but to make a model that will be convenient for many users of Huawei FreeBuds SE 2 headphones.
DESCRIPTION This version of the stand has been created on my own in FreeCad with the help of a great tutorial on YouTube . In this particular case the stand has been desigend for the original Huawei Charger for the Watch Fit 4 Pro. The…
Edit 2025/09/05 : Added a version for the Huawei Watch GT5 41mm. Original post message : A simple charging dock for the new Huawei Watch Fit 4 Pro. Fitting of the charger is quite tight, you might need some force to mount it on the dock.…
Honor (Huawei) Smart Watch Stand with Magnetic Charging
This is a stylish Smartwatch Holder for the GT3 42/46mm Version. Easy to print without any supports. For the assembly you can stick both parts together. Recommended to assemble is to glue both parts with Loctite 416 or an other glue for…
Druck mit 0.4mm Nadel und 0.20mm mit Speed :) , Esun Filament Rainbow, einfacher Ständer Achtung auf die Richtige Ausrichtung ( Magnet).
Bottom is flat. Case is tested. Best printed slowly in TPU.
Подставка для зарядки часов HUAWEI Watch 4 Pro
Bottom is flat. Case is tested. Best printed slowly in TPU.
A charging stand I made for my Huawei watch 3 pro. It fits the charger perfectly, and you can run multiple cables through the side gap in the stand as a cable organizer. the stand on itself stands perfectly (without or without the watch),…
Wall mounted charging base for the Huawei Watch Fit 2. (this one in case of confusion: https://www.amazon.co.uk/HUAWEI-WATCH-FIT-Smartwatch-Monitoring/dp/B09ZV2PT2V ) Insert charging cable into the base and the watch sits sideways across…
Looked for a nice and sleek looking stand for this awesome smartwatch, couldn't find anything to my liking so I made this one in Fusion360, fits perfectly and charges flawlessly. Enjoy. Print Settings Printer Brand: Anet Printer: A8…
I design this to mount my new phone on my gorillapod. The model has a threaded hole (1/4 inch 20 thread ) to connect it to the tripod. Print instructions No support needed
This caddy should fit at least for the following Huawei Systems: RH2288H V3 RH2288 V3 RH5885H V3 RH5288 V3 To my knowledge there is currently only one type of LFF caddys huawei produces, so the should also work on other systems. For…
Stand for Huawei watch GT One version with cable managment, and one without. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Category: Mobile Phone
Bottom is flat. Case is tested. Best printed slowly in TPU.
The HUAWEI SUN2000-10KTL-M1 is cooled only passive and therefore the temperature is very high. This was my solution to it. You can add a 140mm fan and turn it on time based or with some intelligent electronics. I recommend to active cool…
A stand / mount for Huawei Band 9 charger. Depending on printer tolerance it's either a snug or tight fit for the charger itself, so no glue or anything required to hold it in place. I printed mine sideways, with a little bit of support…
An easy to print Huawei Watch 2 charging stand with ''hidden'' charger cable. Printable without supports. Print instructions No Supports are needed, just rotate it on the side and you are good to go.
The Huawei E5577 MiFi device that I have came with a 1500mAh battery (HB434666RBC) which last about 3 to 4 hours. To get more airtime, I changed to a 3000mAh battery (HB824666RBC) which boosted the airtime to around 8 to 9 hours. However,…
Watch charger base for Huawei
Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%
Huawei is the 3rd largest smartphone manufacturer in the world. In addition to Huawei's name, its own brand uses a flower-shaped logo. This is a symbolization of the Hua syllable that can mean petals or can also mean a lavish and…
I was looking for a stand for my watch, but nothing fit my specs. Made my own in Fusion 360 :). Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% - 40% Material: PLA
I really like that the design is very simple visually, hides the cable and also very easy to print due to the sweeping curves and flat sides to print. Only the cable trenches may be a bit rought, but they are filled with the cable so it…
Layer height: 0.12 or 0.2 Supports: yes
Charging Stand Cradle - Charging Dock will work for Huawei GT2 - GT - GT 2e or any magnetic charger puck with dimensions 40,5mm outer diameter & 10mm thick charging “puck”. You will probably need supports, see one pic of how I sliced(in…
Charger holder for Huawei GT3 Watch
A quick (no) design of a wall mount for Huawei K562. It is a fast and basic design made with cubes and cylinders! hahaha It has two holes on each side. Allows a 45-degree exit of the power plug and network cable at port 3.
Phone and smartwatch stand (Samsung galaxy s23+ and Huawei GT2 PRO)
Bottom is flat. Case is tested. Best printed slowly in TPU.
Despues de 3 años de uso del cargador de mi móvil (huawei P30 PRO) el conector había empezado a romperse levemente (seguro que mi gata mordiéndolo y estar arrastrando por el suelo han ayudado) así que me decidí a imprimir un protector.…
Designed for Huawei Qi wireless charger CP60 Remodeled specifically for iPhone Xs Max (with phone case). Should also works for phones in similar sizes without resize the model. Tested on iPhone X, XS, XR. All working perfectly. 05.30.2019…
Tablet holder Huawei MediaPad M5 RAM mount
Stabilizer for https://www.thingiverse.com/thing:4652517
Charger info: Width: 100mm Thickness: 10mm
Shelf-type wall mount for a Huawei Mesh 7 unit. The countersunk screw holes have a single sacrificial layer that pops once a screw is pressed in. Print settings: Printed on a Bambu P1P using PLA. 3 walls for strength and to avoid…
A simple cable cover to hold the cable down
Halter mit versteckter Kabelführung Ein Magnet Ø10x2mm wird benötigt für die Ladeeinheit (ca.Ø38mm)
Might also fit for other Huawei routers, it must contain the table stand to have a snug fit.
The wall mount bracket of the HUAWEI wi fi a3 router is based on the model of the router itself. https://www.printables.com/model/1331151-huawei-ax3
Hi, these are easilly printable and very usable wrist straps for Huawei Gt2/Gt2e watch. I modelled them by measuring and redesigning from my wife's GT2, to fit my Gt2e, so I know it fits both. Would need some work to move fixtures but…
Huawei Watch Kid 4 Pro Holder for Plastic cover.
This case can be printed in PETG or TPU I have provided 3mf-files for PETG and 3mf-files for TPU ( x,y scaling factor 0,992, z scaling factor 1,04 ) The TPU version has to be adjusted in x,y and z direction for a snug fit! I also raised…
Cover for Huawei mate 10 lite printed in TPU no Supports required
Charging station for Huawei GT6
Charger stand for Huawei GT 2e smartwatch
Huawei Freebuds 5i case (Print in place, no supports)
Holder for a Huawei Router
A charging stand for the Huawei Watch. Based on beavertank's "Minimalist Huawei Watch Charging Stand - Mk. 2" with the following changes: Watch is centered on the holder, not way off to the edge All parts are filleted using wide compound…
Es handelt sich um einen Ständer für die Ladeschale der Huawei WatchD - oder Baugleiche. Da die Watch D ein geschlossenes Armband hat, liegt die Ladeschale nicht gerade auf. Mit dem Ständer kann die Uhr stabil auf der Ladeschale aufgelegt…
Compatible with Huawei EchoLife EG8141A5 and other Huawei routers with similar physical dimensions. Printed on using eSun PLA+ white Filament
I made these bumpers to keep my charger from getting scratched up when I set it down on the pavement at an EV charge station. They're designed to work with the modified Huawei R4875G1 chargers sold by Roger Charger and GuLi. Currently,…
