Counting matching models…
Here is Germany’s National Football team logo for multicolor 3D printing. The logo has 4 golden stars that represent its 4 World Cup Championships. This model has 7 colors for a challenging print. Designing the model The logo was obtained…
I saw this on Instagram the other day and decided to do it as a 3D printable little thing. This is a magical illusion by flipping this little tile with an arrow . When flipped on one hand by holding it on two opposite corners, the arrow…
Created for Liquid Stands Z-Style Stand , but should be compatible with any similarly generic support beams (36x36mm). Print Settings Can be printed with any setting. Optimized recommendation configuration provided below. Nozzle: 0.6mm…
Maxmaker Himill D1/D1S Extender use 12x1 mm tape to glue the profiles
This 1:100 scale model represents SpaceX Sub-orbital stand used during the earlier SN Starship tests. This project was a joined collaboration with fellow designer Arco Hollestelle in 2020. Contents: Structure for original feet, no bars…
Add gcode to change filament at the following layers: -Main logo crest starts with dark blue color -Layer 10 gold color or beige color -Layer 19 yellow color -Layer 22 dark blue color -Layer 25 red color For multicolor printing, a 3mf…
Here is a 3D option for the engine base block of the Vulcan Centaur papermodel from AXM website. It's in 1:96 scale. For those who find it difficult to build the Vulcan Centaur engine block, you can glue this 3d part. Use white pla…
Instax mini picture frame stand with sliding access to seat photo. Instaed of a just a slot to slide the photo into I designed a sliding back, mostly because I was teaching myself the boolean feature with OnShape. Id suggest placing the…
Simple prints that you can (zip)tie to the back of your model, providing a large surface area to use double sided tape.
Easiest Part to break on the Paper Model, thus i made a 3D Printed Version. Size should be correct but can vary depending on your Paper Printing Size. Printer Brand: Creality Printer: Ender 3 V2 Resolution: 0.2 Infill: Not needed, but id…
Here is my design version of the Miami Dolphins football team logo for 3d printing. No need for multicolor or AMS. Change filament at the following layers: -Start with white -Change to orange at layer 10 -Change to teal color at layer 16…
Here is the New England Patriots football team logo for 3d printing. No need for multicolor or AMS. Change filament at the following layers: -Start with white -Change to blue at layer 10 -Change to gray color at layer 16 for the face…
Here is my design version of the Boston Celtics NBA team logo for 3d printing. No need for multicolor or AMS. Change filament at the following layers: -Start with white -Change to black at layer 11 -Change to green color at layer 17…
These are a set of pen jaws, based on the idea of the Axminster Pen Jaws at this link . They can be used with Axminster wood lathe chucks (I've only tested with the SK114, but they should work with others). They obviously will never be as…
Here is my 3d logo of the Italian prestige car, Ferrari. There are two files, an stl and a 3mf. Printer settings: 0.4 mm nozzle, 0.2 resolution, 15% infill gyroid Add gcode at the following layers if you don't have a multicolor feature on…
Here are two files, an stl and 3mf. Add gcode to change color at the following layers if you don't have a multicolor feature on your printer, like the AMS, AMS lite or MMU. Printer settings: 0.4 mm nozzle, 0.2 resolution, 15% infill…
This 3D printable model consists of two parts that are to be glued together. It is designed to go underneath the Massey's Stand papermodel from my AXM Paper Models website. This model can be printed with or without a multicolor tool. I…
Based on my base french cleat https://www.printables.com/model/1150189-french-cleat-68mm-base i made a little holder for my Axminster wheel marking gauge with a little top cover so that it doesnt instantly gets super dusty. i made the…
This is a replacement hood for the Axminster Workshop 1400SS Spindle Sander that fits the original screw holes and allows for a 100mm hose to be connected to the machine instead of the original 60mm. The hood in the pictures has a 90…
I made this small case to have a possibility stick it to my laptop corpus. Size is lil bit smaller then original and board have thight fit inside. Maybe it will be helpfull to some one reference board: alfa awus036axml
I needed a simple mount for the Alfa AWUS036AXM wifi stick. It uses a Mediatek ax-chipset and is plug and play on linux. I use it with my 3D printer to get better wifi range and speed.
Here’s the current crest of the FC Bayern Munich for 3D printing. The crest has changed several times over the years. Colors are blue, red and white. It has the colors of Bavaria in its center, and FC Bayern München in white on a red ring…
Here is Germany’s National Football team logo for multicolor 3D printing. The logo has 4 golden stars that represent its 4 World Cup Championships. This model has 7 colors for a challenging print. Designing the model The logo was obtained…
Perfect for every one who wants to have the rocket, but does not want to make the small parts of the motor. Soon I will be uploading a model of the Be-4 engine at the same scale. Vulcan rocket:…
Perfect for every one who wants to have the rocket, but does not want to make the small parts of the engine. Vulcan rocket: https://axmpaperspacescalemodels.com/index.php/vulcan-centaur/ New Glenn rocket:…
I have two sets of jaws for my woodturning chuck, and this print is a way to store the set that is not in use. The design makes room for small magnets beneath each screw, to hold the jaws in place. I used 4x1mm magnets . You will need 16…
the Taxman from REPO two variants. every like 2 frames or something in stopmotion replace with each other
I saw this on Instagram the other day and decided to do it as a 3D printable little thing. This is a magical illusion by flipping this little tile with an arrow . When flipped on one hand by holding it on two opposite corners, the arrow…
Created for Liquid Stands Z-Style Stand , but should be compatible with any similarly generic support beams (36x36mm). Print Settings Can be printed with any setting. Optimized recommendation configuration provided below. Nozzle: 0.6mm…
Maxmaker Himill D1/D1S Extender use 12x1 mm tape to glue the profiles
This 1:100 scale model represents SpaceX Sub-orbital stand used during the earlier SN Starship tests. This project was a joined collaboration with fellow designer Arco Hollestelle in 2020. Contents: Structure for original feet, no bars…
Here's the United States National Soccer Team logo. Original file is an svg exported to Fusion 360 and converted into a 3mf file for a multicolor 3d printer. A stand is included. Colors: Blue, Red and White Filament used: PLA 0.4 nozzle…
Adds an extra docking screw hole which is aesthetically similar with r2pdx existing modifications. For me it's better with 4 screws, the position of the docked toolhead is more predictable (at the expense of slightly more picky…
This is a stand compatible with the AXM Space Shuttle orbiter with open payload. It is based on the actual stand for the Atlantis attraction at Kennedy Space Center, with the same degree inclination of 43.21 degree. It's a simple design…
Supports required only for the arm. Glue together with super glue.
This is a Gridfinity bin for the Combination Square from Axminster Tools that you can find here: https://www.axminstertools.com/axminster-precision-combination-square-set-300mm-4-piece-105405 It is designed so that the ruler can be…
3D printable engine section for the AXM paper models. These octawebs should fit right inside of the body tube of the rocket. This model fits well with the stands @IanThePineapple has made. https://www.thingiverse.com/thing:4243912 Print…
While visiting our local IKEA, I noticed they had nice LED lights which I could use to light up my printbed so the webcam image would not be all dark. The Vaxmyra "mirrors" have a left and a right side and should fit right in the…
A display stand consisting of 3 parts for the AXM Starliner/Centaur papermodel.
Do you ever use a voice chat app to talk to your buddies while playing games? Don't you hate having to open up Windows Mixer to adjust the volume of the chat and the game? Maxmix is an open-source sound mixer that allows you to control…
Fits right onto the stock axman right hand. Teach the clanners a thing or two about causality.
Simple Design to cover one of the dust ports on the Axminster HBS350N Bandsaw
I wanted to set up Vaxmyra LED Spots and change the angle it shines to. This is a mount to light things from below. Remove the bottom metal ring or remove the little plastic clip from the Vaxmyra to fit propperly. I printed the sample…
Knobs for the Maxmix project - https://maxmixproject.com/ Create your own using Knob-Blank! Find pre-sliced files for all models under "User Print Files" 9/21/20 - "D hole" has been centered on all knobs.
edit: I just added the R99 version of the mod. I DIDN'T PRINT THIS ONE YET BUT IT SHOULD WORK (someone already printed it and had no problems!) . Just pick the file named R99 that fits your Nano port and encoder holes. The Top is…
Being the father of a UF college student, I created my own svg file to make this 3D logo using Adobe Illustrator. I have included two separate STL versions, one is the full Gators head to be printed on a neutral gray color and the other…
I created my own svg file to make this 3D logo using Adobe Illustrator. I made this logo for a friend of mine whose daughter graduated from FSU. I used a different approach to make this logo by adding the feather as a separate item. The…
I created my own svg file to make this 3D logo using Adobe Illustrator. I made this logo for my nieces who are studying at UGA in the city of Athens, Georgia, US. This is one STL file. Colors to use are: black, white and red. Add a gcode…
Here’s a nice display stand I made for 3D logos out there available online. The photos I posted show some of my logos I have designed. It’s an easy print that doesn’t require supports. No raft is needed. I used a brim instead. It takes…
I created my own svg file to make this logo, using Adobe Illustrator. To make the stl file, I used Fusion 360. Colors to use are: black, white and red. Add a gcode to change filaments at the following layers: Start with white color Black…
This is an organiser for Axminster tools engineer squares, it fits 250mm & 75mm squares, which can be wall mounted. I wanted a conpact design that I fould mount to a wall and easily access my squares and not have them lieing around on…
Holzschraubenmutter / Wood screw nut / Spaxmutter Category: 3D Printing
A lightweight case for a PAX 3 vaporizer. The cap is a very light friction fit. The main purpose of this case is to prevent the bottom door from being nudged in transit (in a pocket or bag). Doing so could dump your herbs out, which can…
Here's my own version of the A.F.C. Richmond football team logo inspired by Ted Lasso's TV program on apple TV. This model contains separate parts, which makes it much cleaner in terms of the layered colors. I decided to make the dog…
solid throat plate for an Axminster bandsaw and others that take a 38mm plate
A ‘shoe’ for the drive center. It lets you hold it firmly on the palm of your hand and so ‘slam’ the MT home safely and securely. No risk of the sharp 9 mm center pin piecing the rag you would otherwise probably grab for this. The load is…
Add gcode to change filament at the following layers: -Main logo crest starts with dark blue color -Layer 10 gold color or beige color -Layer 19 yellow color -Layer 22 dark blue color -Layer 25 red color For multicolor printing, a 3mf…
Add gcode at the following layers: -Start with black color -Change to white color at layer 10 -Change to pink color at layer 16 For multicolor printing, a 3mf file has been added.
I got the logo online and converted to svg format to be exported to Fusion 360. This logo consists of two parts: the logo crest and the CRF lettering. The size of the logo is 180 x 145 x 3.8 mm This is my approach to avoid the layered…
I converted the CR Flamengo 1895 coat of arms (escudo) image into an svg format, then exported it to Fusion 360. It measures 180 x 152 x 6 mm Add gcode to change filament at the following layers: Start with black color Change to red color…
Famous German car logo. Add gcode to change filament at the following layers: Start with gold color Change to red at layer 10 Change to black at layer 16 Change to gold at layer 21
Here is a multicolor 3d printing technique using one extruder without an AMS on an Ender-3 printer using PrusaSlicer. I'm including the 3mf file along with the STEP and GCODE file as well. Although this is done automatically by having an…
