1,166 models
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
This is yet another playing card box. It's a simple model, but quite functional. In addition to providing a nice place to store cards, the base makes a great draw pile holder, and the top makes a great discard pile holder. The…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
Show-off your vinyl cover and always remember what's on your table with this “ Now Playing ” record stand. Place it on a flat surface and lean your record against the wall or use the integrated holes to mount the stand on the wall.…
Print approx. €7.74–€9.47 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- ONE SERIES, ONE FAMILY Adult model but in standing position: Holiday Christmas Deer - Low Poly Adult model but in laying position: Laying Christmas Deer - Low Poly Youngster model:…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
I remixed the model to have the inner dimensions of 64.1 x 90 x 19.8 mm, which perfectly fits my set of French-suited playing cards, which should be the standard size. I did this because for me, the original was a little bit too large to…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
An elegant box for 2 decks of playing cards. You can print with 2 colors like me. Card hole sizes : (but of course, you can scale to what you need) Height: 87.6 mm Width: 62.6 mm Depth: 19 mm
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Update: Added "no design" version of the box A simple box for storing Bicycle playing cards. My print settings: Resolution: 0.2mm Infill: 20% No supports needed I printed this using Devil Design Black PETG (I also attached the gcode…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
This is a generic card box based on the rugged box by Whity. As the generic cards have different dimensions compared to UNO cards, they did not fit into the UNO box . The box is designed for cards with a dimension of 91mm x 59mm and a…
Print approx. €7.30–€8.93 excl. taxPreliminary estimate for one variant
I really liked the concept of the original that can be found here: https://www.printables.com/model/362095-catan-card-holder-v1 However, it was too small for the version of Catan cards I have. So this is a scaled up version to fit cards…
Print approx. €10.82–€13.22 excl. taxPreliminary estimate for one variant
This little guy started out as a lawn sculpture, and was blasted into the future by means of software (Trnio for iOS, Blender and PrusaSlicer) and magic (3D Printing). I used Trnio on my iPhone (in ARKit mode) to create the base model,…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Praying Mantis
Print approx. €7.12–€8.71 excl. taxPreliminary estimate for one variant
A holder for playing cards I made so my kids could play with us without showing everyone their cards.
Print approx. €3.94–€4.81 excl. taxPreliminary estimate for one variant
This is a deck of cards that is completely usable! (the gcode is for one card)
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This is an aid to keep your Playing Cards in place if you are struggling with it a little bit. I made it for my daughter, but it's also perfect for Seniors or disabled Persons. I recommend to print these two parts separately, because you…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
This is a case with snap-on lid for a single deck of standard size playing cards. It is the same design as my other two deck model, just reduced in height for single deck: Playing Card Holder for 2 Stacked Decks Printing Tips This is a…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for one variant
This is a simple deck holder for your playing cards. There are several sizes included: Poker sized (63.5mm x 88.9mm / 2.5" x 3.5"), single deck Poker sized (63.5mm x 88.9mm / 2.5" x 3.5") double deck Bridge sized (57mm x 88.8mm / 2.25" x…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
There is a new and improved version, wich fixes the issue of peg breakage: https://www.printables.com/model/531140-improved-cat-playing-board-pegs This game board for cats is a great way to keep cats busy. Just print 4 oft the stl model…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant
Needed a hard case for playing cards that would protect cards from damage better than the cardboard box that cards are stored in. Prints with NO SUPPORT and the lid easily snaps on the box in PLA. Let me know if you try other materials.…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
ITA Un semplice porta carte da gioco multi-livello per facilitare il gioco ai bambini o chi ha disabilità motorie. ENG A simple multi-level playing card holder to make playing easier for children or those with motor disabilities.
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
Bigger base for more fun Pack of 21 tetris cube shapes New tetris cube shapes for off-axis play Bigger base optimized for Prusa MINI (90% scale) More shapes, more fun
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for one variant
hinged playing cards case, designed for standard cards(58mm x 88mm) no support needed print in place
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for PETGSource material: PET
Support required under the letters. Use smart fill to paint on supports Vinyl sleeves are light so you can use double sided tape to stick to cabinet or wall. Or create your own holes in Prusaslicer for a stronger fix with screws.
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Hello, I have a Mantis Insect for you. It is suitable as a decoration for a terrarium, or just for an exhibition. Suitable as an addition to an insect collection. You have several types available. It prints very nicely. Good luck with the…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
This is a remix of the design by Adam Miller. I was looking for a box that would hold my canasta cards, and really struggled finding anything I liked. I remixed it, adding the word canasta and then printed some card decals which i stuck…
Print approx. €5.74–€7.02 excl. taxPreliminary estimate for one variant
Hello, Today I have a large 40x40x40 game cube for you. Suitable for children to play board games. Quite big but it's really easy to play with, and it's perfectly shaped. I used PLA/PETG as the material. No need to use supports!!! If you…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This model is designed to display your Cd cases and show what is currently playing. also this model has a ergonomic Design with most the corners rounded. !!this model is not the final faze and i may make a better one later in the future!!…
Print approx. €12.64–€15.45 excl. taxPreliminary estimate for one variant
Piece for my sons travel size trouble game.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
5/24/24 - Updated: added a new version where 2nd row of cards sits 10mm higher. Playing card holder. Help young, old and any players hold 20+ cards without straining your hands. Printed in any filament with no supports.
Mario Playing Peaches. Can Also just download the Individual Parts. Bowserpeaches.3mf is all the parts placed on plate.
(Printed in Fiberology PCTG Onyx, Clas Ohlson PLA Gray, Bambu Lab PLA Black) This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for…
A simple playing card holder I made for my daughter. Fusion360 file and short how to change the name in the pictures 💪🏻 Update Since the top layer is not flat it always printed with small "stairs" To get rid of this I rotated the X axis…
This is a play card holder for the little hands of my kids, that are not able to hold many cards. I designed it with two rows and enough space between them for easy grabbing of the front cards. Most holders with two rows are too tight in…
original designer: https://www.thingiverse.com/thing:1203313
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
This piece allows you to hold multiple cards as well as set them down in front of you on the tabletop. Features: The curved groove holds cards and helps hide them from nosy neighboring players. Grip on the back also acts as a stand Print…
This is not really a remix, this is simply a translation of the file names and instructions for the Playing Card Shuffler by farfadet53. I have not yet printed this myself, once I do I will update this thing with photos. If it doesn't…
This is a even more hexed version of the playing card box with a convenient sliding lid.
For those that have problems holding groups of playing cards in their hands. This design should fit in a 210 printable area. If you need a larger size, simply scale it in the slicer.
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
***REUPLOADED FROM THINGVERSE*** Double deck height, designed for easy grabbing of cards and placing cards down neatly. Also has little pocket for cards placed outside of play (such as jokers or information cards) Update V2: Out of…
Stand to hold your currently playing piece of music. Holds vinyl records (7" or 12"), CDs, and cassettes. The stand has notches for each to fit in and be held at the perfect angle. The now playing sign needs to be printed separately with…
Design Concept The Playing Cats Wall Decor is an artistic representation of feline grace and playfulness, captured in silhouette form. It portrays cats in various playful poses, interacting with a butterfly among frames, bringing a sense…
Card holder for small hands or full hands. Print and let this hold your cards if you are unable, or if your hands are full of wine and cheese, beer and pizza rolls, etc.
Playing card case This was made with the size of card of mine. This might be smaller or larger for yours. So I attach my Fusion 360 file too. You can modify it in the way whatever you like. The spade was not included. If you want any…
Cat laying down bookmark Powered by MakerWorld-Image to Keychain (https://makerworld.com/makerlab/imageToKeychain)
This is a hexed version of a box for playing cards with a convenient sliding lid. Perfect for kids' playing cards like "Italian for One", "Skibbidi Boo", "Phazor 10", etc. Also check out the even more hexed version:…
For Halloween decoration. Non support is OK. Organic support is recommended if adding support.
I was inspired by /u/kyranaomi on Reddit to make make my own cheese dice: https://www.reddit.com/r/DicePorn/comments/k0xqqi/cheese_dice/ The dice were remixed from arcaneoctopuslab's “19mm wall supported dice set” on Thingiverse:…
This playing card deck case is an easy print and disassembles into two card trays. The case snaps together and holds your deck securely. It's designed to work with standard-sized playing cards. Each half of the case has an opening to…
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
A minimalist but strong vinyl record holder with a 'now playing' shelf on the front. Prints without supports. If you would like to print and sell this, or any of my other designs, please sign up to my club on my profile page.
My mom (and some of her friends) have trouble holding a full Bridge hand, 13 cards. This is a simple but effective tool for doing just that. Curved to keep cards private, sits nice and stable on table. Easy to print, no support needed.…
This box is perfect to store your playing cards, while you aren't using them. The box delivers the perfect protection to transport your playing cards in your backpack, pocket or wherever else you put your cards. If you want to know which…
Normal playing cube, it work on normal playing cube. Please download and like it 🥺 I want prusameters😸
When you have LOTS of cards in your playing hand (for games such as UNO no mercy), this holder has 3 tiers.
I needed a box for the cards I carry in my bag, as their original cardboard box died. Model is parametric - just input the details of your deck of cards, and the model will update, so could be used for playing cards, Pokemon cards, Magic…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for bridge-size cards, so they will not fit poker-size ones Bring the playing cards…
So, here is v2.1. Hopefully, this fixes the issue for many of you with the lid being too loose. Happy printing! I recommend using a 0.2mm layer height, but feel free to experiment :)
A low poly version of the laying reindeer model. Simplified for easy printing. Didn't see any remixes for the model with the original Creative Commons license so I wanted to release one with the correct license. Original Model by yeg3d :…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** *** HEADS UP: this is a good model to do comparison test with Prusa's new…
2 Versions: Large (200mm) and small (100mm) I highly suggest you print with slim tree supports building plate only You will still need to clean up under the chin and a few other things Please "Like", review and upload make. Commercial…
97x71 version of the original project
The source marked this model as adult content.
Praying Angel Figurine – Serene and Elegant Bring a touch of peace and grace to your home with this beautifully detailed Praying Angel Figurine . Few supports are needed. I used organic-style supports, which peeled off cleanly with…
Bring peace, devotion, and timeless elegance into your home with this beautifully detailed Praying Virgin Mary Statue. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller…
Playing card tray. Great for any card games. holds approximately 2 decks of cards. Printed in PLA with no supports.
I wanted to make some storage boxes for playing cards, and saw SpoonUnit's design ( https://www.thingiverse.com/thing:3616094 ). I ended up starting from scratch to make a much simpler box. I fits the full UNO, DOS, or phase 10 decks…
Quick printing models of the 4 suits in a deck of cards. I always forget what suit is trump when playing Euchre, so instead of keeping with tradition and asking for a reminder every other trick and getting laughed at by my family, I…
Decided to design my own as I found my little girl was struggling to hold many cards when playing Uno. The gap is a 1mm which holds a single card loose-ish, the idea is to start at the top which has some flex so if you pinch a little it…
Keep your records on display while they are playing. Holds a single record. This is a glued version. I'll post a remix with holes for a screw version. I was too lazy to do a color swap on my mini so just used a sharpie Update: Uploaded a…
I wanted to make a display for my 4 Batman Hot wheels cars. UPDATE added a model to allow for 5 cars! Category: Vehicles
A protective and slim case for a classic deck of 52 cards. This case has a tray that holds the cards and a sleeve that slides onto the tray. Keeping cards safe and the whole case strong and sturdy. This replaces the box that the cards…
I've recreated the single TPU O-ring because you only need 4 + the 2 wide rollers.
25ish characters I've made over the last few years. These have been made for resin printers. If you make one I would love to see it.
Usage First Download Stencil3.dxf from https://www.thingiverse.com/thing:100779/files in the same dir Open card.scad in OpenSCAD Main : edit cardSuit with one of these : ♠ ♥ ♦ ♣ edit cardNumber with 0 to 13 (Joker=0) edit type with hole,…
A remix of the great djedje_zr7 's Parametric Card Box , specifically designed for Theory11's awesome Star Wars playing cards . I've modified the original magnetic closing system with a printed one: now box and cover just snap together!…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker The travel case will fit a standard size deck of playing…
Elegant and sturdy drawer box with snap closure for Skat and similar playing cards. Please print in the specified orientation, with a layer height of 0.2 mm and a line width of 0.4 mm or more. Do not use a different layer height as the…
Graceful Praying Angel Statue 🕊✨ Bring a touch of serenity and beauty into your space with this elegant praying angel figure. Carefully designed with flowing robes, delicate wings, and a peaceful expression, this model captures a timeless…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
This is a simple playing card holder for people who have a difficult time holding their cards. I've seen similar designs on Amazon , but no similar designs that can hold more than three thick plastic playing cards. This can hold about 8…
Krishna (/ˈkrɪʃnə/IAST: Kṛṣṇa) is a major deity in Hinduism. He is worshipped as the eighth avatar of the god Vishnu and also as the supreme God in his own right. He is the god of compassion, tenderness, love and is one of the most…
Used Poly.cam to scan an angelic sculpture of with detailed wings and draped clothing. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints…
This handheld Playing Cards Holder is designed specifically for young kids. It features a series of curved, horizontal slats to neatly organize and display playing cards. The vertical handle, equipped with ridges, ensures a secure grip…
This is a standard deck of French playing cards. The deck consists of 52 cards with suits clubs (♣), diamonds (♦), hearts (♥) and spades (♠), numbered from 2 to 10, Jack to Ace. There is an optional Joker card to print if needed. I have…
Discover our Playing Card Holder, perfect for young players and table game enthusiasts. This holder is designed to make card games more accessible and enjoyable for everyone. Key Features: User-Friendly Design: Ideal for those who…
Do you have various sets of different sized playing cards that are just flopping about without anything to hold them together? Look no further, this card box can accomodate any set! (as long as it's not bigger than your printer) The STLs…
A simple two part turn table that prints without supports and uses a standard 6004 bearing but I have seen some print in place bearings that might be interesting to use. I designed and made it for spraying and painting other models but it…
-- Model description -- This model solves one of humanity's biggest problems: the paper cases in which playing cards are sold get completely destroyed and useless after a couple of tosses in a backpack. My design is a durable, yet easy to…
Needed a last-minute costume for an Alice-in-Wonderland party. These let me create a crazy hair style to go with a red and black suit. They are quite chunky. I scaled them down to be 19cm long and they still could have been skinnier.
Needed a quick and easy way to display a a soccer ball on the wall. Step file included so you can redesign your own way.
This printable helps you organizing your village in "Dorfromantik: The board game". Never make a complete mess again by accidentally touching a plate in your village. All parts can be connected to each other to create the shape necessary…
You probably printed already "Cat toy playing board pegs play" and your cat figured it out pretty well or you have more than one cat and the board is simply to small for both of them. Then you need this collection of extensions and…
A support made to accompany your vinyl record set up and display the cover accordingly. Made of two pieces that are then glued together, leaving an elegant and striking design to accompany your desk. It is made in such a way that you can…
Store your playing card game in an easy to print and secure case. When playing your game the top and bottom can be used as draw and discard organizers. This case is designed to hold closed while stored or traveling but able to be pulled…
Updates 2026-07-15 added "Italian for One No Percy" (168 cards, 56 x 88 mm), thanks to @Neizo_195722 Description With this card box you cannot only carry your cards wherever you want - with this box you also can play wherever you want!…
![#0189 [UPDATED] Fanout Playing Cards Case, now V2!](https://media.printables.com/media/prints/1090799/images/8248226_31e1db75-300b-4dfb-8308-7f723ad0b955_671b0708-4fe4-4b42-958d-5f25b65b4dea/rl-20241128-007.jpg)
![#0099 Latching Poker Playing Card Hard Case [w/Diamond Pattern]](https://media.printables.com/media/prints/589876/images/4716360_968ca957-dbcc-498f-b4db-c3b271dec7ec_2a661ca2-b8fe-4f07-8282-6968b1af301f/20230923_083207.jpg)
