Counting matching models…
Turkish drone Baykar Bayraktar TB2 model. Printed on Artillery Hornet 3D printer. Material ABS To print from ABS, I had to add a tower, which is connected to the wing.
PlayKeys 3D is a set of toy keys designed to provide children with a realistic and safe play experience. This collection includes two distinct models, carefully crafted to resemble real keys while ensuring they are suitable for…
The thing that holds the plate rack together kept breaking. Here is a new stronger one for the Fisher and Paykel dishwasher. I did with 60% infill. Few months later and the ABS is still fine.
I designed an adapter which fits to the Scoot and Ride Highwaykick 1 scooter to guide your child with a handle. You can connect it to the original position like shown in the pictures. To connect the adapter with the scooter you need to…
remix, this one lets you clip in the racks but also allows you to lock in the rack on the bottom
You will need 2 screws approximately 1 cm Two models: 18.5mm 21.5mm if you use metal spacer
Protection feet for for rod pod's compatible with both Dayko Bitubo & Meccanica Vadese Included are both STL files compatible with your favorite slicer, as well as STEP and F3D files if you wish to personalize the model. If you wish to…
Someone asked me to make a copy of this little tab for their refrigerator, to replace a broken one. I also included a STEP file if you need to make modifications.
Additional foot rest for the "Scoot &Ride Highwaykick". It simply fits onto the main shaft as Long it's in the first elevated locking position. Zusätzliche Fußrasten für den "Scoot & Ride Highwaykick". Die Rasten lassen sich einfach auf…
Demon Knight - Frank Brayker (William Sadler) - 1995 3D printable model.
Description This is a fully 3D printable push stick adapter for the Scoot & Ride Highwaykick 1 , designed to allow the use of a 22–23 mm diameter broom stick as a push handle when the scooter is in seated mode . The Highwaykick 1 cannot…
Better adapter for Mayku Formbox. The original one did not provide sufficient seal. This one is for 35 mm hose, but you can adjust the diameter in the .f3d file, or in the step file. . We printed this with 95A TPU. It shouldn´t matter…
Should fit various models. Print it with TPU. Ninjaflex is a little softer than the original part and is challenging to print with. Or, Ninjatek Cheetah is quite a bit firmer than the original part - maybe reduce walls to leave fins…
These are press-fit replacements for the clear plastic pieces that fit into the aluminum extrusions at the back of some Fisher & Paykel manufactured (including DCS branded) fridges' shelves. They are equivalents to Fisher & Paykel part…
Our Fisher and Paykel BI602X Wall Oven started to have an issue with the Soft Touch Buttons. The button edges started to crumble. It was only a matter of time before the buttons would stop being functional and they were starting to be…
Adapter allowing to stack an Aykasa 4314 foldable create on top of an Eurobox 40 x 30 cm.
Servo bracket for AYK Bobcat/Buffalo RC car
ca. 6cm breit und 4,5cm hoch (gut skalierbar) ab Layer 11: Filamentwechsel (rot) kein Support nötig
A drain hose loop clamp for Fisher & Paykel dual-drain hose DishDrawers, US/Canada models. Good if you can't use their supplied one due to space. DishDrawers have some specific height requirements for the drain loop, and the supplied…
Printable spare part for the Fisher & Paykel DW60FC4X1 dishwasher
The original fabric softner dispenser broke. I redesigned the part to be a bit tougher. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.28 Infill: 100% Filament: esun PETG Category: Replacement…
This is the central part of the roll bar that holds the bodywork for the AYK Bobcat/Buffalo RC car.
I accidentally broke the pinion drive gear on my fridge drawer so I modeled a replacement. This pinion drive gear is a replacement for Fisher & Paykel part no. 838502P. No supports required. Recommend printing in at least PETG or ASA.
Printer : i3 MK3 Rafts : no Supports : no Resolution : 0.20 Infill : 100% Filament : FLEX
This is a 1-piece replacement for the original Fisher And Paykel button support used in models DW60OUC2X, DW60OUC6X, DW60OUC6B.DW60OUC2X, DW60OUC6X, DW60OUC6B. Click here for instructions on how to replace it .
I made two versions with or without AYK logo The holes have a diameter of 5.2mm
Motor plate for AYK Bobcat/Buffalo RC car
Rear support (on gearbox) for AYK Bobcat/Buffalo RC car
These are the sliders and pins for the side rails of the Fisher and Payker CosyCot neonatal heater bed. I suggest PETG / ABS printing, but the sliders in PLA eventually supported the side rails and bended the central line without…
Vacuum adapter for the Mayku FormBox. Has a spiral wound thread on the other side to attach to 1-3/16" Flexible tubing such as the below https://a.co/d/0bJ9trP3 Recommend printing in TPU for tight seal on Mayku FormBox. Threads print best…
Replacement feet for a Fisher & Paykel ED56 clothes dryer. I have made the feet 10mm lower than the standard feet to clear tighter spaces if needed. I've had success printing in PLA+ with 25% infill but will be printing in TPU .4mm…
After we got the Scoot and Ride Highwaykick 1 I noticed that it is not possible to get an official push bar for this model. So I modelled an adapter that fits the hole in the back. I used the adapter with a mop pole with 20mm inner…
Fisher Paykel Spline Driven - 425080 or part of kit 479318P. Half of the dog clutch in the center of the was basket. Needs to be printed out of something tough,like PC-GF in my case, but PA6, PA12 etc should work as well. For PC-GF I used…
My Fisher and Paykel Refrigerator has an Ice Maker. This is a copy of the bracket that holds the termistor onto the bottom of the ice tray. One of the pegs broke off my original bracket causing the thermistor to dangle down into the ice…
The thing that holds the plate rack together kept breaking. Here is a new stronger one for the Fisher and Paykel dishwasher. I did with 60% infill. Few months later and the ABS is still fine.
BMW DisplayKey Wireless charger case. Accomodates standard QI modules. The key could be charged with the leader case on. Material used - PLA wood
Update 2: PP works well. Getting it to print without warping is not the easiest. Maybe try an enclosure to increase your odds. Update: The PETG didn't last (warped, broke). Also, high temp glass filled PLA from polymaker (ht-pla-gf)…
My latch broke, created a replacement part. You will need a 3mm plastic screw (6 to 8mm), as I really wanted to optimize for strength by not having loads in between the layers. Ideally print in Nyon, however ASA and ABS should work fine
Replacement button for controlling the timing buttons on a Fisher & Paykel oven.
Replacement wheel for Fisher & Paykel dishwasher Printed in PETG 2mm layer height no supports
Demon Knight - Frank Brayker (William Sadler) - 1995 3D printable model.
This is a replacement clip I made for the upper door flap on my 213L Fisher & Paykel Vertical Freezer. The original clip was made from injection molded ABS (picture of original included). Fisher and Paykel part number 855140 This is not…
Mayku includes a “one size fits all” vacuum adapter with its Formbox. Well, true of home vacuums, but not handy shop vacs. This adapter allows you to use a RIGID shop vac with the included adapter. note: Be sure your vac uses LESS than…
My cousin made an illustration of owl for a long time ago. And I modeled it in 3d as pyramid sculpture. I printed them on my custom made printer with 300x300x400 build volume. Biggest part is no 51, so i scaled it to build volume and…
Replacement rear left glass rack for Fisher and Paykel two drawer dishwasher. I had to shorten it by about 15mm to fit on my printer, but still seems to work with a little bit of a gap. I printed in PLA+ and worked, however did not like…
